Proposed modification to existing MCSRDC Building in ADB area for insourcing of printing press facility including Civil Electrical and Allied works for ARDC Division HAL Bangalore

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Proposed modification to existing MCSRDC Building in ADB area for insourcing of printing press facility including Civil, Electrical and Allied works for ARDC Division, HAL-Bangalore. Cont. No: HAL/FMD/R-40/26-27

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

PART - I [Civil Works]

DEMOLITION/DISMANTLING & DISPOSAL WORK

1 Dismantling 15 to 40 mm dia G.I./cpvc pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets etc., all complete as directed by Engineer-In-Charge . 45.00 metre 3.16 Rupees Three and Sixteen Paise Only 142.20

2 Making the opening/chippig for doors/ windows/ ventilators in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls,flooring and jambs complete, to match existing surface,curing,leveling,including disposal of mulba/ rubbish to the nearest municipal dumping ground upto a distance of 50m, etc., all complete as directed by Engineer-In-Charge . 99.00 Sqm 1230.21 Rupees One Thousand Two Hundred Thirty and Twenty One Paise Only 121790.79

3 Dismantling EWC/IWC Pans/urinals with associated fixtures and accessories of all sizes including disposal of dismantled materials i/c malba,making temporaray arrangements for blocking service lines to avoid water leakages etc., all complete as directed by Engineer-In-Charge. 11.00 Each 130.48 Rupees One Hundred Thirty and Forty Eight Paise Only 1435.28

4 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, stacking serviceable and unserviceable material separately including cutting reinforcement bars,after making temporary proetction for existing service lines and Existing Lintel Beams etc., all complete as directed by Engineer-In-Charge . 3.00 Cum 3175.47 Rupees Three Thousand One Hundred Seventy Five and Forty Seven Paise Only 9526.41

5 Demolishing brick work with cement mortar manually/ by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL etc., all complete as directed by Engineer-In-Charge . 29.00 Cum 2461.30 Rupees Two Thousand Four Hundred Sixty One and Thirty Paise Only 71377.70

6 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL,after making temporary proetction for existing service lines etc., all complete as directed by Engineer-In-Charge . 20.00 Cum 1919.72 Rupees One Thousand Nine Hundred Nineteen and Seventy Two Paise Only 38394.40

7 Dismantling doors, windows/ventilators and clerestory windows (steel or wood) shutter including chowkhats,steel frames,grills , glass,architrave, holdfasts andother fixtures etc. complete and stacking within 50 metres lead of area 3 sq. metres and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any etc., all complete as directed by Engineer-In-Charge . 54.00 Each 357.29 Rupees Three Hundred Fifty Seven and Twenty Nine Paise Only 19293.66

8 Dismantling of road gully chamber/trap of various sizes including C.I. grating with frame and making temporary arrangements to protect ongoing service lines,including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap etc., all complete as directed by Engineer-In-Charge . 10.00 Each 932.86 Rupees Nine Hundred Thirty Two and Eighty Six Paise Only 9328.60

9 Dismantling/removing Vitrifed/mosaic tiles,granite,PVC sheets (upto 40mm tile thickness.) in floors and walls laid on cement mortar ,after disconnecting the electrical service and AC lines if any,including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL etc., all complete as directed by Engineer-In-Charge . 185.00 Sqm 547.58 Rupees Five Hundred Forty Seven and Fifty Eight Paise Only 101302.30

10 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including all accessories and stacking of useful materials near the site,making temporary arrangemnst to avoid water leakage and disposal of unserviceable materials within 50 metres lead etc., all complete as directed by Engineer-In-Charge . 10.00 Each 109.03 Rupees One Hundred Nine and Three Paise Only 1090.30

11 Dismantling/Removal of Aluminium partition, Gypsum partitions,FRP/aluminum doors, windows,ventilators including glazings and False ceiling with grids & tiles including disposal of unserviceable material, handing over usefull materials to user department and stacking of serviceable material with in 50 meters lead etc., all complete as directed by Engineer-In-Charge . 562.00 Sqm 54.83 Rupees Fifty Four and Eighty Three Paise Only 30814.46

12 Dismantling steel work in single sections welded,anchored including associated woden railings etc (Channels, angles, tees and flats ) including dismembering and stacking within 50 metres lead and handing over the usefull materials to user department etc., all complete as directed by Engineer-In-Charge .. 130.00 Kgs 2.24 Rupees Two and Twenty Four Paise Only 291.20

13 Dismantling C.I./asbestos/PVC rain water pipe with fittings and clamps including stacking the material within 50 metres lead and handing over the useful materails to user department etc., all complete as directed by Engineer-In-Charge .

a) upto 100 mm dia 75.00 metre 75.89 Rupees Seventy Five and Eighty Nine Paise Only 5691.75

b) Above 110mm to 150 mm dia 165.00 metre 78.08 Rupees Seventy Eight and Eight Paise Only 12883.20

14 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding like rolling shutters,louvers,gates etc etc. including dismembering and stacking within 50 metres lead and handing over the usefull materails to user department etc., all complete as directed by Engineer-In-Charge . 300.00 Kgs 5.50 Rupees Five and Fifty Paise Only 1650.00

15 Hacking of existing CC flooring including cleaning for surface and making suitable for new tiles flooring etc., all complete as directed by Engineer-In-Charge . 682.00 Sqm 3.36 Rupees Three and Thirty Six Paise Only 2291.52

16 Disconnecting damaged overhead/terrace PVC water storage tank of any size/capacity from water supply line and removing from the terrace including shifting at ground level etc., all complete as directed by Engineer-In-Charge . 1.00 Each 422.04 Rupees Four Hundred Twenty Two and Four Paise Only 422.04

17 Removing existing roof top water proofing APP membrane/plastic felt etc ,and the like by scrapping, sand papering and preparing the surface to lay the new water proofing materails etc., all complete as directed by Engineer-In-Charge . 415.00 Sqm 24.47 Rupees Twenty Four and Forty Seven Paise Only 10155.05

18 Disposal of surplus earth/excavated earth/moorum/building demolished rubbish/ malba/APP/plastic felt similar unserviceable, dismantled or waste material of partitions,ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL etc., all complete as directed by Engineer-In-Charge . 3.00 Cum 480.76 Rupees Four Hundred Eighty and Seventy Six Paise Only 1442.28

19 Supplying, mixing and placing plain cement concrete (1:3:6) of required thickness using 20mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-In-Charge . 5.00 Cu m 7097.75 Rupees Seven Thousand Ninety Seven and Seventy Five Paise Only 35488.75

20 Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in Floor leveling/ lacing courses,coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,plinth etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing etc., all complete as directed by Engineer-In-Charge . 12.00 Cu m 9628.03 Rupees Nine Thousand Six Hundred Twenty Eight and Three Paise Only 115536.36

21 Supplying, mixing and placing plain cement concrete (1:2:4) upto 40mm thikness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 at terrace roof slab inluding leveling/ lacing etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., all complete as directed by Engineer-In-Charge . 415.00 sqm 597.62 Rupees Five Hundred Ninety Seven and Sixty Two Paise Only 248012.30

22 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement etc., all complete as directed by Engineer-In-Charge .

a) All works above plinth level column,beams,slabs,canopy,chajja,stairscase etc. level including necessary openings and packing if any for laying pipes, cables etc. 4.00 Cum 9594.17 Rupees Nine Thousand Five Hundred Ninety Four and Seventeen Paise Only 38376.68

23 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings etc., all complete as directed by Engineer-In-Charge . Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 144.00 Kgs 104.94 Rupees One Hundred Four and Ninety Four Paise Only 15111.36

24 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge etc., all complete as directed by Engineer-In-Charge . 648.00 Kgs 751.54 Rupees Seven Hundred Fifty One and Fifty Four Paise Only 486997.92

25 Providing and fixing M.S. grills with made of M.S. flats, square or round bars to suitable openings of required pattern/ frames with rawl plugs screwsas per site requirement only etc. including priming coat with approved steel primer etc., all complete as directed by Engineer-In-Charge . 999.00 Kgs 231.92 Rupees Two Hundred Thirty One and Ninety Two Paise Only 231688.08

SHUTTERING/FORM WORK

26 Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing etc., all complete as directed by Engineer-In-Charge . Note :Formwork material is contractor's own property and shall be removed after completion of work.

a) Foundations, footings, bases of columns/pedestal,for mass concrete etc. 6.00 Sqm 381.56 Rupees Three Hundred Eighty One and Fifty Six Paise Only 2289.36

b) Lintels, beams, plinth beams, girders, bressumers and cantilevers 21.00 Sqm 716.52 Rupees Seven Hundred Sixteen and Fifty Two Paise Only 15046.92

27 Supply and Construction of Sized stone masonary works with CM(1:6) in foundation and plinth by placing the stones in layers including bonded stones as per standard ,packing,leveling,curing and finishing the joint etc., all complete as directed by Engineer-In-Charge . 7.00 Cum 8574.13 Rupees Eight Thousand Five Hundred Seventy Four and Thirteen Paise Only 60018.91

28 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation,plinth and for walls,chambers,ducts,drains etc at all levels & heights using C:M(1:6) including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering all complete etc., all complete as directed by Engineer-In-Charge . 17.22 Cum 9578.85 Rupees Nine Thousand Five Hundred Seventy Eight and Eighty Five Paise Only 164947.80

29 Providing and laying factory made Precast concrete solid blocks of 100 mm thickness of grade M10 made of C&D waste from approved manufacturer in plinth and for walls,chambers,ducts,drains etc at all levels & heights using C:M(1:4) including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering etc., all complete as directed by Engineer-In-Charge . 72.00 Sqm 981.91 Rupees Nine Hundred Eighty One and Ninety One Paise Only 70697.52

30 Repair to plaster of thickness 12mm to 20 mm in patches of area lesser than 2.5 sqm including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, without causing hindrance /protecting the existing floor finish work etc., all complete as directed by Engineer-In-Charge . 40.00 Sqm 652.83 Rupees Six Hundred Fifty Two and Eighty Three Paise Only 26113.20

31 Plastering to internal brick/block wall with 15 mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work etc., all complete as directed by Engineer-In-Charge . 158.00 Sqm 372.66 Rupees Three Hundred Seventy Two and Sixty Six Paise Only 58880.28

32 Plastering to ceiling with 12 mm thick on the rough side with cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work etc., all complete as directed by Engineer-In-Charge . 14.00 Sqm 337.68 Rupees Three Hundred Thirty Seven and Sixty Eight Paise Only 4727.52

33 Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work etc., all complete as directed by Engineer-In-Charge . 72.00 Sqm 504.55 Rupees Five Hundred Four and Fifty Five Paise Only 36327.60

34 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall,ceilings/existing surface including preparation of the surfces by scrapping existing paint/stains, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand etc., all complete as directed by Engineer-In-Charge . 1438.00 Sqm 362.74 Rupees Three Hundred Sixty Two and Seventy Four Paise Only 521620.12

35 Providing and finishing old walls in two or more coats with Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 ltr/ 10 sqm over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc., all complete as directed by Engineer-In-Charge . 1314.00 Sqm 152.23 Rupees One Hundred Fifty Two and Twenty Three Paise Only 200030.22

36 Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including scrapping,preparationof surface for etc., all complete as directed by Engineer-In-Charge . 100.00 Sqm 156.26 Rupees One Hundred Fifty Six and Twenty Six Paise Only 15626.00

37 Providing and applying synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in One or more coats on new work/old by cleaning and srcapping to make the surface smooth before appling paint etc., all complete as directed by Engineer-In-Charge . 175.00 Sqm 220.14 Rupees Two Hundred Twenty and Fourteen Paise Only 38524.50

WOOD & ALLUMINUM- JOINERY WORKS

38 Providing, fabricating and fixing aluminium work for partitions,Curtain wall frames, flats, covers, Ventilators, Windows, louvers, doors, etc frame work.,(Min. thickness of powder coating 50 microns) made up of aluminium extruded sections,Ventilators: conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frame s to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, e) Shutters are to be provided with galss of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.9 mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,Panelling,fly proof mesh will be paid seperately). 114.00 Kg 516.57 Rupees Five Hundred Sixteen and Fifty Seven Paise Only 58888.98

39 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket etc. all complete as per the architectural drawings etc., all complete as directed by Engineer-In-Charge . 131.00 Sq.m 1464.61 Rupees One Thousand Four Hundred Sixty Four and Sixty One Paise Only 191863.91

40 Aluminium work for shutters of doors, windows,Sliding i.e Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges/ pivots,tracks,channels,wheels and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including necessary accessories, all complete as per the architectural drawings etc., all complete as directed by Engineer-In-Charge . 90.00 Kg 617.32 Rupees Six Hundred Seventeen and Thirty Two Paise Only 55558.80

41 Providing and fixing 12mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type Il, 1S:12823 marked in alluminumdoors, glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts to be measured), all complete as per the architectural drawings etc., all complete as directed by Engineer-In-Charge . 80.00 Sqm 1998.01 Rupees One Thousand Nine Hundred Ninety Eight and One Paise Only 159840.80

42 Providing and fixing Second Class Teak wood for frames of doors, windows, hand rails, frame work for partitions in etc, cut to shape and required curvature with polishing fixed in position with hold fast lugs/with dash fasteners of required dia & length/SS Screws at all heights,with necessary moisture content test etc., all complete as directed by Engineer-In-Charge . 0.50 Cum 139090.06 Rupees One Lakh Thirty Nine Thousand Ninety and Six Paise Only 69545.03

43 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame etc., all complete as directed by Engineer-In-Charge . 60.00 metre 555.53 Rupees Five Hundred Fifty Five and Fifty Three Paise Only 33331.80

44 Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 of approved brand/type etc., all complete as directed by Engineer-In-Charge . 10.00 Sqm 4367.75 Rupees Four Thousand Three Hundred Sixty Seven and Seventy Five Paise Only 43677.50

45 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) etc., all complete as directed by Engineer-In-Charge . 12.00 Each 222.67 Rupees Two Hundred Twenty Two and Sixty Seven Paise Only 2672.04

46 Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand/make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25 mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and polish veneers on both faces of shutters and making rectangular vision panel of 0.1sqm with 6 mm thick clear heat strengthened glass etc., all complete as directed by Engineer-In-Charge. 15.12 Sqm 3036.88 Rupees Three Thousand Thirty Six and Eighty Eight Paise Only 45917.63

47 Providing and fixing panelling minimum 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) for UPVC/wooden doors shuttres,windows,ventilators and clerestory window,including cutting and finishing as per site requirement etc., all complete as directed by Engineer-In-Charge . Note: Only visible glazing area will be considered for payment. 33.90 Sqm 2530.24 Rupees Two Thousand Five Hundred Thirty and Twenty Four Paise Only 85775.14

48 Providing and fixing bright finished brass handles of 125mm size with screws etc., all complete as directed by Engineer-In-Charge . 12.00 Each 249.72 Rupees Two Hundred Forty Nine and Seventy Two Paise Only 2996.64

49 Providing and fixing bright finished brass hanging type floor door stopper with necessary screwsetc., all complete as directed by Engineer-In-Charge . 6.00 Each 118.36 Rupees One Hundred Eighteen and Thirty Six Paise Only 710.16

50 Providing and fixing bright finished brass tower bolts of 250x10mm (barrel type) with necessary screws etc., all complete as directed by Engineer-In-Charge . 12.00 Each 429.68 Rupees Four Hundred Twenty Nine and Sixty Eight Paise Only 5156.16

51 Providing and fixing bright finished brass 100 mm mortice latch and lock with min. 4levers and a pair of lever handles of approved quality with necessary screws etc., all complete as directed by Engineer-In-Charge . 6.00 Each 831.58 Rupees Eight Hundred Thirty One and Fifty Eight Paise Only 4989.48

52 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc., all complete as directed by Engineer-In-Charge . 6.00 Each 1094.48 Rupees One Thousand Ninety Four and Forty Eight Paise Only 6566.88

53 Providing and fixing aluminium sliding door bolts(aldrop) of 250 x16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc., all complete as directed by Engineer-In-Charge . 6.00 Each 253.57 Rupees Two Hundred Fifty Three and Fifty Seven Paise Only 1521.42

TILING & GRANITE WORKS

54 Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.5sqm, like Ruby Red/Black/Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, and similar types of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc., all complete as directed by Engineer-In-Charge. 9.00 Sqm 5267.34 Rupees Five Thousand Two Hundred Sixty Seven and Thirty Four Paise Only 47406.06

55 Providing and fixing Ceramic wall/glazed tiles(Light/dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black , in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade of any size as approved by Engineer-in-Charge. 242.00 Sqm 1233.71 Rupees One Thousand Two Hundred Thirty Three and Seventy One Paise Only 298557.82

56 Providing and laying Glazed /Matt/Antiskid finish tile of Size 600 X 600mm or nearest available size as indicated below for Paper Joint in different sizes ( Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc. all, complete as per instructions of Engineer Incharge. 54.00 Sqm 1425.30 Rupees One Thousand Four Hundred Twenty Five and Thirty Paise Only 76966.20

57 Providing and laying Double Charged vitrified floor tiles polished finish size of tile Size of 600 X 600 mm or nearest available size in floors over a screed of cement mortar (1:4) 20 mm thick for Paper Joint ( Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc. all, complete as directed by he Engineer in charge. 679.00 Sq m 1414.40 Rupees One Thousand Four Hundred Fourteen and Forty Paise Only 960377.60

58 Providing and laying Vitrified tiles in Skirting/cladding over a screed of cement mortar (1:3)-Size of Tile 600x600 mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. all, complete as directed by he Engineer in charge. 26.00 Sq m 1579.23 Rupees One Thousand Five Hundred Seventy Nine and Twenty Three Paise Only 41059.98

59 Providing and laying Polished Granite stone flooring and stair case raiser/partitions/divider and steps in colour Black, Cherry/Ruby Red or Equivalent in required design and patterns, in linear as well as curvilinier portions of building as complete as per the architectural drawings/Site condition with 18mm thick stone slab or 20mm (average) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand) laid and jointed with cement slurry and pointed with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing.nosing,chamfering and making grooves etc., complete as per direction of Engineer-in-charge. 36.00 Sqm 4360.31 Rupees Four Thousand Three Hundred Sixty and Thirty One Paise Only 156971.16

PLUMBING /SANITARY AND CHAMBER WORKS

60 Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall/floor face including bends,collars,elbows etc,jointing with/without seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc., complete as per direction of Engineer-in-charge. 350.00 Metre 367.21 Rupees Three Hundred Sixty Seven and Twenty One Paise Only 128523.50

61 Providing and fixing Single socketed pipes of 75mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall/floor face including bends,collars,elbows etc, jointing with/without seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc., complete as per direction of Engineer-in-charge. 100.00 Metre 242.08 Rupees Two Hundred Forty Two and Eight Paise Only 24208.00

62 Providing and fixing bright finished brass hard drawn hooks(coat hooks) and eyes of 300mm size etc., complete as per direction of Engineer-in-charge. 12.00 Each 99.10 Rupees Ninety Nine and Ten Paise Only 1189.20

63 Providing and fixing toughened glass shelf of size 600x120x5 mm with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete as per direction of Engineer-in-charge. 4.00 Each 1054.25 Rupees One Thousand Fifty Four and Twenty Five Paise Only 4217.00

64 Providing and fixing C.P. brass toilet paper holder of approved brand and fixing with screws,raw plugs etc., complete as per direction of Engineer-in-charge. 12.00 Each 782.00 Rupees Seven Hundred Eighty Two Only 9384.00

65 Providing and fixing beveled edge mirror of size 600x450mm of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc., complete as per direction of Engineer-in-charge. 4.00 Each 1564.53 Rupees One Thousand Five Hundred Sixty Four and Fifty Three Paise Only 6258.12

66 Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size 630x450 mm fixed with with C.I. brackets/rack bolts , single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern,P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand/make, including painting of fittings and brackets, cutting and making good the walls wherever required etc., complete as per direction of Engineer-in-charge. 4.00 Each 2279.79 Rupees Two Thousand Two Hundred Seventy Nine and Seventy Nine Paise Only 9119.16

67 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required etc., complete as per direction of Engineer-in-charge. 12.00 Each 6339.63 Rupees Six Thousand Three Hundred Thirty Nine and Sixty Three Paise Only 76075.56

68 Providing and fixing 8 mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality etc., complete as per direction of Engineer-in-charge. 12.00 Each 339.72 Rupees Three Hundred Thirty Nine and Seventy Two Paise Only 4076.64

69 Providing and fixing white colour wall hung vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption approx.), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe/waste coupling to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps etc all as per manufacturers specification etc., complete as per direction of Engineer-in-charge. 6.00 Each 7763.76 Rupees Seven Thousand Seven Hundred Sixty Three and Seventy Six Paise Only 46582.56

70 Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap etc., complete as per direction of Engineer-in-charge. 18.00 Each 575.43 Rupees Five Hundred Seventy Five and Forty Three Paise Only 10357.74

71 Constructing masonry Chamber (60x60x75cm) inside or outside (or approx. size as per site condition) , in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. etc., complete as per direction of Engineer-in-charge. 4.00 Each 10569.12 Rupees Ten Thousand Five Hundred Sixty Nine and Twelve Paise Only 42276.48

72 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931 as suiatbel to site conditions, etc., complete as per direction of Engineer-in-charge. 18.00 Each 493.12 Rupees Four Hundred Ninety Three and Twelve Paise Only 8876.16

73 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc as per direction of Engineer in Charge.

a) 15 mm dia 40.00 metre 484.36 Rupees Four Hundred Eighty Four and Thirty Six Paise Only 19374.40

b) 20 mm dia 40.00 metre 523.08 Rupees Five Hundred Twenty Three and Eight Paise Only 20923.20

c) 25 mm dia 60.00 metre 610.31 Rupees Six Hundred Ten and Thirty One Paise Only 36618.60

d) 32 mm dia 15.00 metre 719.34 Rupees Seven Hundred Nineteen and Thirty Four Paise Only 10790.10

e) 40 mm dia 15.00 metre 547.85 Rupees Five Hundred Forty Seven and Eighty Five Paise Only 8217.75

74 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms(or nearest availabe size and weight) etc., complete as per direction of Engineer-in-charge.. 4.00 Each 108.44 Rupees One Hundred Eight and Forty Four Paise Only 433.76

75 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet connection system and overflow pipes,making it operation with final flow check to toilets etc., complete as per direction of Engineer-in-charge.. 2000.00 Litres 10.70 Rupees Ten and Seventy Paise Only 21400.00

76 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps and making temporary arrangements to protect/countinue ongoing service lines of other floors etc., complete as per direction of Engineer-in-charge.

a) 100 mm diameter 10.00 metre 86.59 Rupees Eighty Six and Fifty Nine Paise Only 865.90

b) 150 mm diameter 10.00 metre 95.79 Rupees Ninety Five and Seventy Nine Paise Only 957.90

77 Supply and Making connection of drain pipes of 100 to 250 mm diameter or sewer line with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain etc all complete as directed by the Engineer-in-Charge. 2.00 Each 788.57 Rupees Seven Hundred Eighty Eight and Fifty Seven Paise Only 1577.14

FALSCE CEILINGS

78 Providing and fixing mineral fibre false ceiling tiles (of approved brand/make) with 16 mm thick beveled tegular edge with (NRC 0.55 to 0.60) at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-In-Charge. 62.00 Sqm 2270.59 Rupees Two Thousand Two Hundred Seventy and Fifty Nine Paise Only 140776.58

TERRACE : WATER PROOFING WORKS

79 Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/10 sqm or as specified from the standard manufaturer like Fosroc,BASF,Pidilite,Roof,sika etc. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in-Charge. as directed and specified by the Engineer-in-Charge . Note: (i) A performance guarantee bond for 5 years on non-judicial stamp paper of appropriate value shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. (ii) Plan area shall be measured for payment. (iii) The quoted rate shall be for the entire work and nothing extra shall be paid on this account. 412.50 Sqm 1639.12 Rupees One Thousand Six Hundred Thirty Nine and Twelve Paise Only 676137.00

80 Providing and fixing factory made 3 track UPVC glazed/wire mesh windows comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of min 1.50 mm and upto 2.1 mm for Using R3 series with frame Approx. size of (98mm & above and upto 112 mm) x (40mm & above & and upto 52mm) or nearest available, both glazed and fly screen sash Approx. size of (55mm & above and upto 66mm) x (30mm & above and upto 43 mm ) or nearest available, with zinc alloy (zamak) powder coated handle on every glazed panel along with suitable locking system (touch lock, e.t.c), (Height upto 1.8m). conforming to EN: 12608 in any shape, white colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. 56.00 Sqm 7000.00 Rupees Seven Thousand Only 392000.00

The rate is including providing & fixing of 5mm clear toughened Glass and SS mesh in the shutters as directed by EIC/OIC.Glazing to be frosted/provided with sun control film as per site requirement as directed by EIC. Note:- (i) Shop drawings suiting to the site conditions are to be submitted by the vendor for the approval of EIC/OIC prior to commencement of work. (ii) The drawing and scheme of the window/ventilator should be modified accordingly based on site condition with provision for inclusion of Louvers/ provision for exhaust fan/fixed glass portion.Vendor may inspect the site prior to submission of quote. (iii) Opening has to be smoothly finished prior to fixing of the window/ventilator and gaps if any are to filled with silicone sealent. (iv) Clear opening will be considered for measurement.

81 Manufacturing, providing and fixing factory made UPVC glazed Fixed window/ Ventilator at all levels with/ without mullion/transom comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of min 1.70 mm for series R1, R2 profiles and min 2.1mm for series R3, R4 profiles with frame sizes as mentioned below, glazed, conforming to EN: 12608 in any shape, white colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc.

Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware, if required and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Note:- The rate is including fixing of min 5mm clear toughened Glass as per the design requirements and as directed by EIC/OIC.Glazing to be frosted/provided with sun control film as per site requirement as directed by EIC.

a) UPVC glazed fixed type Ventilator of Approx. size .1.5 m X 0.9m using R1 series with frame Approx. size of (33mm & above) x (35mm & above) or nearest available & mullion (33 mm & above)x (50 mm & above) or nearest available, if necessary. (Height upto 0.9 metre) Note:- The rate is including including providing & fixing Glass. 3.00 Sqm 3855.00 Rupees Three Thousand Eight Hundred Fifty Five Only 11565.00

b) UPVC Ventilatorwith louvered & mesh of Approx. size1.5 m X 0.9 m or as per site suitable size using R1 series with frame Approx. size of (33mm & above) x (35mm & above) or nearest available & mullion (33 mm & above)x (50 mm & above) or nearest available, if necessary. (Height upto 0.9 metre) including S.S mesh for restricting bird entry, all complete as per directions of EIC. Note:- The rate is including including providing & fixing S.S mesh. 40.00 Sqm 4314.84 Rupees Four Thousand Three Hundred Fourteen and Eighty Four Paise Only 172593.60

Total of PART - I [Civil Works] Rupees Seventy Lakh Sixty One Thousand One Hundred Ten and Seventy Six Paise Only 7061110.77

PART - II [Electrical Works]

1 Supply, erection, testing & commissioning of Main LT Panel(PTTA). 1.00 Each 204468.22 Rupees Two Lakh Four Thousand Four Hundred Sixty Eight and Twenty Two Paise Only 204468.22

Design, fabrication, supply, installation, testing and commissioning of Indoor type LT Panels(PTTA) suitable to be mounted on the brick pedestal/on M.S channel/angle frame work as per site requirement including M.S channel/angle frame work for erection of panel, with cable entry from bottom/top as per drawing coordination by EIC with removable gland plates with required knock-outs for incoming and outgoing cables. Panel shall be fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components,totally enclosed and degree of protection shall not be less than IP-54, multi-tier cubicle type formation with front hinged lockable doors for the individual feeders / compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips, and to provide good quality locking arrangment, durable door opening & closing mechanism, Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.

Note:-1) Current density shall not exceed 0.8A/sq.mm for Aluminium bus bars in LT Panel

2)All MCCBs in the LT panels shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects.

3)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.

i) 1-no 200A 415V gr 4P 36KA MCCB TM Based

ii) Lot - 250A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-200/5A current transformers of suitable class and VA burden for metering.

v) 1no-(0-500V)range digital type Voltmeter with a push button option for selecting the phases.

vi) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

vii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 4-Nos 125A 415V gr. 4P 25KA MCCB

ii) 8-Nos 63A 415V gr. 4P 10KA MCB.

2 Supply, erection, testing & commissioning of Sub LT Panel(PTTA). 2.00 Each 84828.39 Rupees Eighty Four Thousand Eight Hundred Twenty Eight and Thirty Nine Paise Only 169656.78

i) 1-no 125A 415V gr 4P 36KA MCCB TM Based

ii) Lot - 200A, 4P, 415V, short circuit rated 36KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-125/5A current transformers of suitable class and VA burden for metering.

v) 1no-(0-500V)range digital type Voltmeter with a push button option for selecting the phases.

vi) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

vii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 12-Nos 32A 415V gr. 4P 10KA MCB.

Light fixtures, fans and exhaust fans

3 Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 olt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on ousing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) as per CPWD specification

a) 40 watt 113.00 Each 3122.88 Rupees Three Thousand One Hundred Twenty Two and Eighty Eight Paise Only 352885.44

4 Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).LED Down lighter (SMD Type) (System lumen efficacy ≥120<135lm/Watt)Powder coated die cast /Extruded aluminium Body including trim as per CPWD specification

a) 18 watt 16.00 Each 798.31 Rupees Seven Hundred Ninety Eight and Thirty One Paise Only 12772.96

b) 12 watt 12.00 Each 605.93 Rupees Six Hundred Five and Ninety Three Paise Only 7271.16

6 Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)LED Batten light (System lumen efficacy ≥120 <135 lm/Watt)Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) as per CPWD specification.

a) 18- 22 Watt 2.00 Each 622.03 Rupees Six Hundred Twenty Two and Three Paise Only 1244.06

7 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 58.00 Each 2442.37 Rupees Two Thousand Four Hundred Forty Two and Thirty Seven Paise Only 141657.46

8 Supply, installation, testing & commissioning of Industrial type heavy duty Exhaust Fan (1 phase) of 300mm dia,1400RPM of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 6.00 Each 4263.56 Rupees Four Thousand Two Hundred Sixty Three and Fifty Six Paise Only 25581.36

9 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 8 way (4 + 24), Horizontal Double door MCB DB 2.00 Each 4490.68 Rupees Four Thousand Four Hundred Ninety and Sixty Eight Paise Only 8981.36

b) 4 way (4 + 12), Horizontal Double door MCB DB 4.00 Each 5370.34 Rupees Five Thousand Three Hundred Seventy and Thirty Four Paise Only 21481.36

c) 40-63 amps. ratings, FP MCB, "C" curve, 10 KA breaking capacity. 6.00 Each 1778.81 Rupees One Thousand Seven Hundred Seventy Eight and Eighty One Paise Only 10672.86

d) 6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity. 96.00 Each 241.53 Rupees Two Hundred Forty One and Fifty Three Paise Only 23186.88

10 Supply, laying, testing & commissioning of following size Aluminium LT armoured power cables.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) conductor(stranded) 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables and as per technical specification including stacking at site, proper storage complete etc., as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)

a) 3.5CX 25 Sqmm Aluminium armoured conductor 100.00 Mtrs 229.66 Rupees Two Hundred Twenty Nine and Sixty Six Paise Only 22966.00

b) 4CX 16 Sqmm Aluminium armoured conductor 300.00 Mtrs 193.22 Rupees One Hundred Ninety Three and Twenty Two Paise Only 57966.00

11 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required

a) 3.5 X 25 sq. mm Al arm cable 4.00 Each 314.41 Rupees Three Hundred Fourteen and Forty One Paise Only 1257.64

b) 4C X 16 sq. mm Al arm cable 30.00 Each 310.17 Rupees Three Hundred Ten and Seventeen Paise Only 9305.10

12 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 12.00 Pts 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 17328.84

b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 34.00 Pts 2286.44 Rupees Two Thousand Two Hundred Eighty Six and Forty Four Paise Only 77738.96

c) Wiring to three light point controlled by 1 No 6A, 250V gr. flush modular type SP switch complete in all respects. 20.00 Pts 3128.81 Rupees Three Thousand One Hundred Twenty Eight and Eighty One Paise Only 62576.20

d) Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type GI/MS Fan hook in ceiling, 2 module type electronic five stepped speed regulator etc., complete in all respects. 58.00 Pts 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 83756.06

e) Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 6.00 Pts 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 8664.42

Wiring for Power Points(6A & 16A power sockets)

13 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required As per CPWD Specification. 56.00 Each 461.86 Rupees Four Hundred Sixty One and Eighty Six Paise Only 25864.16

14 Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. As per CPWD Specification. 54.00 Each 558.47 Rupees Five Hundred Fifty Eight and Forty Seven Paise Only 30157.38

15 Supplying and fixing following size modules, GI box along with Modular base & cover plate for modular switches in recess etc. as required.

a) 2 Module 1.00 Each 300.00 Rupees Three Hundred Only 300.00

16 Supply & fixing in flush with the wall/on wall , factory-built powder coated sheet steel enclosed using suitable angle iron frame work, 32A, 415V, 5 pin industrial Plastic plug top & socket outlet with 32A 415V 4P MCB "C" curve in sheet steel enclosure including necessary interconnections, chipping the wall and replasting to smooth finish wherever necessary complete in all respects and as directed by Engineer in charge. 20.00 Each 4286.44 Rupees Four Thousand Two Hundred Eighty Six and Forty Four Paise Only 85728.80

17 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required as per CPWD specification. 5.00 Each 1530.51 Rupees One Thousand Five Hundred Thirty and Fifty One Paise Only 7652.55

18 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required

a) 3 x 2.5 sq. mm (For lighting ckt from DB to Switch box, For 6A power Points) 100.00 Mtrs 263.56 Rupees Two Hundred Sixty Three and Fifty Six Paise Only 26356.00

b) 3 x 4 sq. mm(For 16A /20Apower points) 600.00 Mtrs 316.10 Rupees Three Hundred Sixteen and Ten Paise Only 189660.00

19 Supply, Fixing, in the existing GI /PVC box as per site requirement, testing & Commissioning of 1 No. Twin RJ-11 telephone socket outlets with shutter with necessary interconnections complete as directed by Engineer-in-charge. 17.00 Each 142.37 Rupees One Hundred Forty Two and Thirty Seven Paise Only 2420.29

20 Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 4 pair Unarmoured 0.5mm telephone cable 200.00 Mtrs 44.92 Rupees Forty Four and Ninety Two Paise Only 8984.00

21.a Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects. 1.00 Each 800.00 Rupees Eight Hundred Only 800.00

21.b Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 20 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects. 1.00 Each 1100.00 Rupees One Thousand One Hundred Only 1100.00

21.c Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 50 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects. 1.00 Each 2600.00 Rupees Two Thousand Six Hundred Only 2600.00

22.a Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects. 20.00 Mtrs 200.00 Rupees Two Hundred Only 4000.00

22.b Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 20 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects. 20.00 Mtrs 330.00 Rupees Three Hundred Thirty Only 6600.00

22.c Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ steel structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 50 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects and as directed by EIC. 50.00 Mtrs 700.00 Rupees Seven Hundred Only 35000.00

23 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20MM PVC Conduit 50.00 Mtrs 127.97 Rupees One Hundred Twenty Seven and Ninety Seven Paise Only 6398.50

b) 25MM PVC Conduit 50.00 Mtrs 142.37 Rupees One Hundred Forty Two and Thirty Seven Paise Only 7118.50

24 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required.

a) 450 mm width X 50 mm depth X 2.0 mm thickness 10.00 Mtrs 1219.49 Rupees One Thousand Two Hundred Nineteen and Forty Nine Paise Only 12194.90

25 Supply, fabricating and installing of Following size perforated GI cable trays with cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures as per site requirement complete in all respects and as directed by Engineer in charge. (Note:-M.S. angle supports will be measured separately).

a) 200 x 50 x 2mm thick cable tray with 1.6mm thick cover. 100.00 Mtrs 820.00 Rupees Eight Hundred Twenty Only 82000.00

26 Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular type MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. 40.00 Each 700.00 Rupees Seven Hundred Only 28000.00

27 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non-Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required as per CPWD specification 1000.00 Mtrs 62.71 Rupees Sixty Two and Seventy One Paise Only 62710.00

28 Supplying and fixing of 15U Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. As per CPWD Specification. 1.00 Each 11296.61 Rupees Eleven Thousand Two Hundred Ninety Six and Sixty One Paise Only 11296.61

a) Supply, providing and Fixing Cast Iron Pipe earth station confirming to IS 3043 complete with 2750mm long, 100 mm Inner Dia(ID),13mm thickness CI Pipe, with 2 part clamp made out of G I flat 50 x 6 mm continuously welded around the pipe using cast iron welding electrodes as per drawing. The cost also incudes excavation for earth pit, providing & laying homogenous mixture of charcoal lumps, salt & sand all around the pipe as per specification, supplying and fixing of RCC Collar of size 450 mm dia, 450 mm height and 50 mm thick over Cement concrete base of minimum size 150mm width & 100mm thick all around below collar shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc., supplying & fixing the label board(MS Plate of size 300mmx200mmX2mm) welding to the electrode complete as per specification, std drawing, instructions of EIC. 2.00 Set 20500.00 Rupees Twenty Thousand Five Hundred Only 41000.00

b) Supply, fixing & connecting the 50X6mm size G.I strip on wall / clamping to the existing duct wall / fixing on steel structures/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and the LT & HT panels earthing & Transformer body earthing as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re concreting will be measured separately. 20.00 Mtrs 420.00 Rupees Four Hundred Twenty Only 8400.00

c) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 20.00 Mtrs 135.59 Rupees One Hundred Thirty Five and Fifty Nine Paise Only 2711.80

d) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 50.00 Mtrs 42.37 Rupees Forty Two and Thirty Seven Paise Only 2118.50

30 Supply and laying of 50mm dia, PE-80, PN6 ISI marked HDPE pipe confirming to IS 4984:19955 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 20.00 Mtrs 86.44 Rupees Eighty Six and Forty Four Paise Only 1728.80

31 Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 1.00 Cu.Mtr 527.00 Rupees Five Hundred Twenty Seven Only 527.00

32 Demolishing Cement Concrete manually/machanical means including disposal of material within 50 metres lead as per direction of Engineer in charge 2.00 Cu.Mtrs 3009.53 Rupees Three Thousand Nine and Fifty Three Paise Only 6019.06

33 Re-concreting the cut portion/closing the dummy cable duct at same area with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed. As per CPWD Specification. 2.00 Cu.Mtrs 7274.07 Rupees Seven Thousand Two Hundred Seventy Four and Seven Paise Only 14548.14

34 Design, Fabrication, Supply and fixing/grouting/welding on wall/ceiling/ truss of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC. 30.00 Kgs 99.45 Rupees Ninety Nine and Forty Five Paise Only 2983.50

Total of PART - II [Electrical Works] Rupees Twenty Lakh Thirty Eight Thousand Three Hundred Ninety Seven and Sixty One Paise Only 2038397.61

Part III - Fire alarm System

INTELLIGENT FIRE ALARM SYSTEM

1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications

a) Two Loop Panel. 1.00 Each 212220.34 Rupees Two Lakh Twelve Thousand Two Hundred Twenty and Thirty Four Paise Only 212220.34

2 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 37.00 Each 2545.76 Rupees Two Thousand Five Hundred Forty Five and Seventy Six Paise Only 94193.12

3 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required 4.00 Each 259.32 Rupees Two Hundred Fifty Nine and Thirty Two Paise Only 1037.29

4 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required. 1.00 Each 2428.81 Rupees Two Thousand Four Hundred Twenty Eight and Eighty One Paise Only 2428.81

5 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 4.00 Each 3443.22 Rupees Three Thousand Four Hundred Forty Three and Twenty Two Paise Only 13772.88

6 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required 4.00 Each 3120.34 Rupees Three Thousand One Hundred Twenty and Thirty Three Paise Only 12481.36

7 Supplying, installation, testing & commissioning of fault isolator complete with base as required 1.00 Each 2910.17 Rupees Two Thousand Nine Hundred Ten and Sixteen Paise Only 2910.17

8 Supplying, installation, testing & commissioning of addressable fire control module complete as required 1.00 Each 2674.58 Rupees Two Thousand Six Hundred Seventy Four and Fifty Seven Paise Only 2674.58

9 Supply, Installation, testing and commissioning of Auto Dailer including the cost of mounting accessories with addressable control module integrated with main fire alarm panel with minimum 10 telephone nos. connectivity complete as directed by Engineer-in-charge. 1.00 Each 13940.00 Rupees Thirteen Thousand Nine Hundred Forty Only 13940.00

10 Supplying & laying of 2x1.5 sqmm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 500.00 Mtrs 162.71 Rupees One Hundred Sixty Two and Seventy One Paise Only 81355.93

Total of Part III -[Fire alarm System] - (Excluding GST) Rupees Four Lakh Thirty Seven Thousand Fourteen and Forty Seven Paise Only 437014.48

Sub-Total of Part I + II+III [Civil + Electrical Works + Fire alarm System ] - (Excluding GST) Rupees Ninety Five Lakh Thirty Six Thousand Five Hundred Twenty Two and Eighty Five Paise Only 9536522.86

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 9536522.86 BELOW % 9536522.86

Add 18% GST Rupees Seventeen Lakh Sixteen Thousand Five Hundred Seventy Four and Eleven Paise Only 1716574.11

Grand Total (Including GST) Rupees One Crore Twelve Lakh Fifty Three Thousand Ninety Six and Ninety Six Paise Only 11253096.97

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/R-40/26-27

Name of Work: Proposed modification to existing MCSRDC Building in ADB area for insourcing of printing press facility including Civil, Electrical and Allied works for ARDC Division, HAL-Bangalore.

Estimated Amount in Lakhs.: 112.5

Tender Notice Date:(DD/MM/YYYY) 10.07.2026

Completion Period(In months) 6

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Any Other Related Information Remarks

1 Name of the Individual / Firm / Company: * Mandatory Pls enter name

2 Type of ownership Related Document to be Uploaded to eProcurement Portal

3 Year of Estblishment of Company/Business

4 If Other, please specify

5 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., If not enclosed reasons be to recorded here

6 Address for correspondence:

7 PAN no and Name of Holder

8 PF number (If any)

10 Goods and Service Tax ID No.

11 Contact details

Contact person name Pls

Ph. No. with STD code

FAX No. with STD code

12 Registered Contractor

If Registered Contractor with HAL (Yes/ No) Pls Enter Related Document to be Uploaded to eProcurement Portal * Category: A = Above 25 Crores B = 15Crore to 25 Crores C = 5Crore to 15 Crores D = 1 Crore to 5 Crores E = Lessthan 100 Lakhs to 75 Lakhs F = 75 Lakhs to 50 Lakhs

Registration No.

13 I.T Returns for past 03 assessment years

2025-26 Pls Select 'Yes','No' for IT Returns for all the 3 years

14 Turnover during the following 5 years (In Rs. Lakhs)

2020 - 2021 Pls enter Finiancial Turnover in Rupees Lakhs for all the years 1 6.00 7.00 0 0

15 DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : CA certified statement as per below format to be uploaded.

Sl. No. Name of Organization with address Name of the work on hand Amount of Contract Rs (in Lakhs) Period of CONTRACT in months Date of Commencement of work as Work Order in dd/mm/yyyy Probable date of Completion as Agreed Actual progress achieved till date of Tender Notification Rs (in Lakhs) Balance value of work on hand [Col.(3)-Col.(7)] Rs (in Lakhs) Remarks If Any 0.00

16 Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Related Document to be Uploaded

17 Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

18 Bank Statement for past three month

19 Latest Overdraft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

20 Solvency Certificate Details

Name of Bank & Branch Pls Related Document to be Uploaded to eProcurement Portal

Value Rs. In Lakhs

21 Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

Completed similar works during last 7 years Pls Select Works Completed during last 7 years

Work No I Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Name of The organisation

Brief Description of Work:

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No II Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Name of The organisation

Brief Description of Work

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal

Name of The organisation

Brief Description of Work:

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Valid Class I Electrical Licence [or] Undertaking for engaging Electrical Contractor possessing valid Class I Electrical Licence Please Enter Electricial Licence No Electricial Licence valid upto Related Document to be Uploaded to eProcurement Portal

22 DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Sl.No Name of members or technical personllel avalable in the organization Qualification of similar nature number of years of experience

23 DETAILS OF MACHINERY AVAILABLE

Sl.No Name of Mechinery No Make Year of Manufacture

1 Concrete Mixers - Type etc

2 Vibrators - Diesel - Electrical

3 Weiding equipment's

4 a) Rectifiers

5 b) Welding Generators

6 Erection equipment's

10 Water Lifting motor pumps

13 Drilling Equipment's

16 Stone crushers

17 Bitumen hot mixture plant

18 Bitume boiler

20 Batching plants

21 Vibratory rollers

23 Cranes-Details

24 Concrete pumps

26 Rock breakers

27 Transit mixers

29 Weight batches

I/We declare and confirm that - 1. All information and attachments submitted in this application are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted. 3. I/We shall not make refund claims of expenditure incurred in processing this application. Pls enter

Descipttion Enclosed / Not enclosed Related Document to be Uploaded to eProcurement Portal

26 Average annual financial turn over during the last 3 years, ending 31st March 2025 and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account (In Rs. Lakhs)

2024-25 Pls Select 'Yes','No' for Annual financial turn over for all the 3 years

Balance sheet and Profit & loss statement for last 05 years