Construction of Multipurpose Sports Complex at Salem District

Amount

CIVIL WORKS:Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying filling in foundation,basement etc with filling suitable embankment filler materilas in layers of not more than 15cm thick well watered,rammed and consolidated etc., complete complying with standard specification and as directed by the department officers.

Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Cement Concrete M 25 1:1:2 (One Cement, One sand and Two hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

a) Upto basement

b) Ground floor

c)First Floor

Cement Concrete 1:2:4 (One Cement, Two M Sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Ground floor

Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Foundation and Plinth

Ground floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Upto Basement

Brick work in Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Inbetween column Up to plinth level

In ground floor

first floor

Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

a)First floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

a) Upto basement

b)For Plane Surfaces Such as RCC Floor Slab,Roof slab,Beams,Lintels,Bed Blocks,Landing Slab,Waist Slab,Portico Slabs-Ground floor

c)For Plane Surfaces Such as Rectangular or Square RCC Columns,Sunshades,Top and Bottom slab of RCC Boxing etc

b)For Plane Surfaces Such as RCC Floor Slab,Roof slab,Beams,Lintels,Bed Blocks,Landing Slab,Waist Slab,Portico Slabs-First floor

c)For Plane Surfaces Such as Rectangular or Square RCC Columns,Sunshades,Top and Bottom slab of RCC Boxing etc

Supplying fabricating and placing in position steel reinforcement using mild steel or ribbed star rods for all RCC works as per the design given including cost of steel and binding wire also in all floors steel and binding wire shall be supplied by the contractors etc., complying with standard specifications.

a)First floor

Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,

Overall length

Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

Supply and fixing of FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers.

Providing and fixing fixed window with 12mm thick toughned glass door including aluminium work with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,Glazing, paneling and dash fasteners all complete as per architectural drawings and the directions of Engineer-in-charge.Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (All items rate E674)

Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.-

a)Ground Floor

b)First floor

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Finishing the floor with granolithic floor finish of 75mm thick with PCC 1:2:4 using 10mm and 12mm gauge HBG metal as per the specification

Flooring with following Plain ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers

a)Ground Floor

b)First floor

Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality Matt finished Anti skid Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M Sand) in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality Swimming Pool Glass mosaic Tiles 1"x 1" with (Random Blue Colour Mix Only) with Dubond or Semtro max Tile Adsehive and Dubond or Semtro max Cement based joint gruot materails, complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickness and having tensile strength of >25 MPa (as per ASTM D 412), elongation of >500% (as per ASTM D 412), puncture resistance of >1000N (as per ASTM E 154), peel adhesion to concrete >1200N/m (as per ASTM D 903), hydrostatic head resistance >70m (as per ASTM D 5385). The system should be fully bonded to the RCC thereby conforming to IS 16471:2017 requirements of UG waterproofing structures. The membrane should be minimum 2.4m wide to reduce the number of joints with minimum 75mm factory made selvedge’s and comprising of an HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective and trafficable granular layer to protect self-adhesive polymer layer, etc, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and filling the tile joint with epoxy grout with followingspecification:Surface preparation including cleaning the joint to befree from dust and loose particles. Providing masking tape on eitherside of the tile joint edges and providing sealing the tile gap withepoxy tile joint grout and finishing neatly and as directed by theepartmental officers. The rate inclusive of cost of materials andlabour, etc., complete.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Nosing for Granite Slab

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and painting the walls with two coats of wall putty asinstructed by the departmental officers including preparation ofsurface curing, etc., complete in all floors complying with standardspecifications (The wall putty shall be got approved by theExecutive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification.

Painting the wall with Texture Finish Paint including labour charges

English Stainless Steel Letters

Tamil Stainless Steel Letters

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00 mm thick as vertical at 900mm centre with 2 nos of 25 mm dia intermediate horizontal stainless steel pipe of 1.60 mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, griding, polishing, conveyance, electrical charges, etc. complete

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for curved Brick/Rcc/8tone walls & columns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent The panel should consist of 3mm thick non-halogonated FR grade mineral based polymer core (2 hrs fire resistance as per A8TM E119-12 & clause B, 81, do as per, 88476 EN 13501) sandwiched between 0.50mm skin thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint The system shall be fixed using Gl brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using weather sealant necessary rods etc., complete.

Providing, mixing, laying polymer based water proofing treatment for the Sunken Toilet / Lift well/ OHT Rcc wall by applying cement based, flexible, waterproofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab / floor slab as per specifications mentioned above providing cement mortar 1:3, waterproofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of grouting with cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cm2 to a length of 45cm for drip pipes, etc. complete.

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)-300 x 300 x 150 mm Kerb Stone

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe

Surface dressing of the ground including removing vegetation ind inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m All kinds of soil

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density ( proctor density)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Supply and Fixing pf 1" Class Teak Wood Sports Flooring standards - finished with 21 mm thick, 55 to 85mm wide and in random length in tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti-termite and water-resistant lacquer. THE UNDER FRAME: - Resilient SPF Pine Wood sleeper subfloor of 70 mm x 45 mm, treated with anti-termite solution and fixed on the bottom side with 19 mm thick EPDM rubber pads, stapled through the two wings at 350 mm x 350 mm. INSTALLATION: - 52mm thick CC subfloor treated with a vapor barrier to be placed on the levelled CC sub-floor before laying the under frame. The runners having air cushion pads to be placed on the vapor barrier in perfect level at 350 mm in 1 direction. The surface board to be Nail to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. The expansion of 12-15 mm will be left open between the wooden flooring and the surrounding tiled area / walls. FINISHING: - After installation the floor will be machine sanded in uniform level and finished with P. U. Polishing water based polyurethane lacquer. Game line marking to be carried out in required colors before applying the finish coat

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

Fabricating, supplying and fixing of prepainted galvalume Roofing sheets with the following specification, The material should be of PPGI approved design 0.5mm thick 24 gauue having width 1050mm.The sheet should be G.I base pre painted hot dipped galvalume sheet and to be fixed with shelf tapping screws. Plastic washer.The washer and screw to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of z120 GSM paint thickness the finish should be terra cotta finish like PPGL finish optional matt finish. The sheet to be fixed with making suitable corrugated cutting the sheet in to the required size and making ornamental desifns as per the site condition and as directed by the deptl.officers.

Supply and Installation of 0.50MM Thick Galvalume Eaves Gutters 150 Gsm JSW Brand with Clamp Set Accesorries

Supply and Installation of 0.50MM Thick Galvalume C -Flashing 150 Gsm JSW Brand with Accesorries.

Providing and fixing of Brick cladding tiles of size 215x60x12mm thick on 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plastered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification.

Supplying and Spreading 100mm thick brick bats including watering and consolidation with power roller etc co

Providing and laying M sand gravel mix 1:1 required thickness give minimum soaked CBR Value as per IRC 37-1984 including cost and conveyance of sand and gravel to the worksite and stacking them to the standard departmental metric gauge for pre measurement mixing the required quantities of a sand and gravel spreading watering and compacting the mix in layers of thickness by 80-100KN roller rolling to achieve the required density including the labour charges for mixing spreading and other tools and plants etc.complete .the slope of the court should be 1" to 10" in breadth wise(or) lengthwise and should be finished neatly as per the standard specification

Supplying and Spreading 100mm thick red earth including watering and consolidation with power roller etc complete

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site including construction of mud pit.

Upto 12 m Depth Pilot bore below ground level

Reaming 150 mm dia Pilot bore hole to size 200 mm dia bore as directed by Engineers

From 0 m Upto 75 m Depth below ground level

Supply of PVC Casing pipe of 200mm dia With 10 mm dia wall thick at site the mean outer dia of the pipes shall be of 229 mm dia and the maximum mean outer dia229.5mm for erecting in the bore well as directed by the departmental officers and as per the standard specifications

Labour charges for inserting PVC Casing pipes assembly (With slots or with out slots) in the Drilled hole including jointing the pipes with pvc couplers with cement paste etc.,Complete Supply and packing the annular space with pebbles of size and quality as approved by the excutive engineers of T T D C officers

supplying and fixing bail plug having length of 0.45 metre from medium class pipe as per IS

Providing water sample Chemical analysis as directed by the corporation officers

Supply of GM Non return valve 50 mm dia

supplying and Delivery of Clear water vertical wet type of 5 HP Submersible Pump set suitable for 150 mm dia borewell con forming to IS 8034/2002 as amended there after and BEE 3 star rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with s.s shaft and dynamically balanced bronze or cast S.S impeller brass screws and CI FG 200 Grade pump Bowl /Diffuser with ISI markThe pump shall be directly coupled to a continuous rates two pole suitable wet type vertical squirrel cage induction motor as per IS 9283/1995 as amended there after suitable for operation in AC three phase 415 V +/- 10% 50HZ +/- 5%

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible Cable with proper Clamps Upto the Starter to required depth and also fixing of riser pipes to the required depth valves erection Clamps Pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN starters and switches, Voltmeter,ammeter,three Pilot (indicating) Lamps Capacitor single phasing PreventerWater level guard and laying and jointing the cables and twin earthing as Per IE rules etc.,Complete and testing the Pumpset and trial run for 10 days TWAD P.No 303,17 C

Supply and laying of FRLS PVC Insulated 3 core 4Sq mm Armoured Copper cable on ceiling /Wall Using Fixing accessories like Screws, Plug, Clamps etc., as per standard methods and as directed by the Departmental officers

supplying and fixing of H D P E Pipe for Submersible Pump

supplying and fixing of Nylon rope to lowering Submersible Pump

Supply and delivery of M.S Kiosk of Size0 .75x0.45x0.75 m Made up of M.S angle of Size 50 mm x50 mm x 4 mm alround covered with 16 Gauge M.S Sheet and Kiosk door made up of M.S Plates of size 25 mm x3 mm including cutting welding Grinding locking arrangements and labour charges etc.,

Plumping Work:Supplying and fixing in position white/ colour special delux model glazed cascade type paryware/Hindware/Equivalent wall mounted European water closet of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litres capacity PVC/12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball value with polythene float with brass handle, union cuppling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover.Wall Fitting

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve,15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc Without Pedestal

Supplying, fixing, testing and commissioning approved make Urinal with piller cock fixed above counter with 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe, 1 No. C.P. flexible inlet connection pipe G.I. expansion bolts etc., complete including silicon sealant.

Supplying, fixing, testing and commissioning of approved make 15mm CP Concealed Stop cock with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.

Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock with Health Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.

Supplying, fixing, testing and commissioning approved make Mirror 600X450 with necessary fixing screws etc complete.

Supplying, fixing, testing and commissioning approved make Angle valve with necessary fittings.

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).Supplying and fixing best quality of C.P. wall mixer ,over head showerarm with rose and necessary fittings etc complying with standard specification..

INTERNAL DRAINAGE SOIL AND WASTE PIPE SYSTEM:Supplying and fixing in position UPVC Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC Pipes should be got approved by the Executive Engineer before use on works).

a) 40 mm dia

b) 50 mm dia

UPVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS :Supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

Elbow Dia 40mm

Elbow Dia 50mm

Bend Dia 40mm

Bend Dia 50mm

TEE Dia 40mm

Dia 50mm

Reducer Dia 50mm X 40 mm

Supplying and fixing in position PVC Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The Pipe specials should be got approved by the Executive Engineer before use on works).

A) 75 mm dia

B) 110 mm dia

B) 160 mm dia

PVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS : Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works)

Elbow Dia 75 mm

Elbow Dia 110 mm

SHOE Dia 75 mm

SHOE Dia 110 mm

Yee Dia 75 mm

Yee Dia 110 mm

Tee with Single Door Dia 75 mm

Tee with Single Door Dia 110 mm

Bend Dia 75 mm

Bend Dia 110 mm

Supplying, laying, jointing, testing and comissioning of approved make PVC floor trap with C P grating with required concrete encasing all around, complete.

a) 110 x 75 mm dia (20 mm water seal)

RAIN WATER SYSTEM: Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

110mm dia PVC Pipe

PVC Specials for Rainwater down fall pipe works

Elbow Dia 110 mm

a) 110 mm dia

a) 160 mm dia(soil pipe)

Supplying, fixing, testing and commissioning of glazed stoneware gully traps, 550x550mm C.I. grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 115 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover (medium duty) etc., complete.

Providing and constructing inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm, benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge.

a) 600 x 600 mm size internal and depth more than 450 mm but not exceeding 850 mm

b) 600 x 600 mm size Heavy duty cover

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

INTERNAL WATER SUPPLY SYSTEM :Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

dia 20mm

dia 25mm

dia 32mm

PVC Specials for water supply arrangements

Elbow Dia 20mm

Elbow Dia 25mm

Elbow Dia 32mm

Tee Dia 20mm

Tee Dia 25mm

Tee Dia 32mm

Coupler Dia 20mm

Coupler Dia 25m.m

Coupler Dia 32mm

REDUCER 25 mm x 20 mm

REDUCER 32 mm x 25 mm

REDUCER 40 mm x 32 mm

EXTERNAL WATER SUPPLY SYSTEM FROM OHT:Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

dia 40mm

PVC Specials for water supply arrangements

Elbow Dia 40mm

Elbow Dia 40mm

Tee Dia 40mm

Reducer 40 mm x 32 mm

a) 32 mm dia ( UG SUMP TO OH TANK)

Elbow Dia 32mm

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. Fixing Gun Metal Wheel Valve

Dia 32mm

Dia 40mm

Dia 50mm

Providing and placing on terrace Polyethylene water storage Tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and overflow pipes, including cost of all materials, labour transport charges, HOM and testing complete as per specifications.

ELECTRICAL WORKS :Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with GI Flush Mounting box and 6A FT switch in flush with wall with Modular cover Plate (Plastic) and making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with suitable model MS box, modular cover plate and 6A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm, MS switch box with Modular coverplate along with 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and laying of 2 x 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') with necessary accessories and end supports for water pump

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For Water pump)

Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. ( SD 530 )

Supply and fixing of single box type 4'18W LED Tubelight fitting complete with electronic ballast with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of single box type 100W LED flood light fitting complete with driver wall or ceiling mount clamp with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of single box type 15W LED foot light fitting complete with driver wall or ceiling mount clamp with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of single box type 15W LED down light fitting complete with driver wall or ceiling mount clamp with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)

Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure, door type with metal door with IP43 protection with Four pole 32A MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with the ISI mark (like standard make)

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable rigid PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 1 of No.8 SWG GI wire for earth connection, including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

Supply and laying of 2 x 6 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of 5A or 10A or 20A AC single phase 230V, 50 Hz Watt hour metre on suitable TW box complete with earth connections

Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection

Wiring with 4 pair unarmoured telephone cable suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with 2 module surface box and RJ11 socket on wall / furniture along with Modular cover Plate (Plastic) and making good of the concealed portion

Supply and wiring with 10 pair jelly filled armoured telephone cable suitable PVC rigid pipe and accesories on wall and ceiling and painting of suitable colour. Rate to include supply and fixing of synthetic box (Krone box) along with required accessories.

Supply and fixing of Synthetic Box (Krone Box) with accessories

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 400mm sweep AC Wall fan (MR)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

LT PANELS CT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. 1set of 200/5A CT with TNEB Metering provision and 1nos of 200/5A CT for APFCR as per direction of Architect and Engineer Incharge

250A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 250A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors,as per direction of Architect and Engineer Incharge

Diesel Generator: Supply, erection, testing, commissioning of 125KVA DG Set With Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 125 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive. The cost will include all statutory approval govt authorities.

Supply and laying of 3.5CX185sqmm Al. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 3.5CX120sqmm Al. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 3.5CX50sqmm Al. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 3.5CX25sqmm Al. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 4CX6sqmm Cu. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and laying of 4CX6sqmm Cu. armoured LTUG Cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 4x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 4x 16 sq.mm. PVC armoured LTUG cable with earth connection

Street Light: Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron - The pole is 9mtr height instead of 8mtr and single instead of double arm

Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 150mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 6 nos fixed in existing RCC foundation and junction box etc, complete 20 Meters

Supply, installation, testing and commissioning of 250 W LED FLOOD LIGHT FITTING with cool day light suitable for surface / recessed mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.

Supply, installation, testing and commissioning of 120 W LED STREET LIGHT FITTING with IP65 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.

Safety Accessories:2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

First Aid Box complete with all First Aid Medicines

Shock Treatment Chart fixed in glass frame

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Supply Installation Testing and Commision of Bobbin Wound Filter Dia 1200mm with Clamp Lid, 3" Connection, Flow rate: 56m3/hr, Filtraion Velocity: 50 m³/h/m²) Max Pressure: 2.5 bar. Totally Anti- Corrosive polyester+Fiber glass filter. Fitted with pressure gauge panel, manual air bleeder, water drain & emptying plug. fitted with collected arms and diffuser made unplasticized PVC & Polypropelene.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of Side mounted Multiport Valve 3" connection. Side mounted multiport valve for connecting to filters. Body and cover injected in ABS with fiberglass. Handle injected in ABS. Sealing system by stainless steel screws. Supplied with two plugs so that the customer can adapt the valve to the most suitable configuration.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of PVC 3 Piece Union 3" Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of Active Clear Glass Media • More efficient and environmentally friendly filtration. • Greater filtration capacity. • Water and energy savings. • Cleaner filter bed as bacteria does not remain trapped and fewer chemical products are needed. Grade 1. Price per bag of 25 kgs including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body of durable composite material, with SS Shaft and mechanical seal. Also have large capacity strainer with fast opening translucent lid. Impeller : Plastic impeller Horse power : 5.0 HP - Commercial Pump - 90mm Connections Flow rate = 56 m³/hr @ 12m water head. (1 working and 1 standby)including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of Trolley mounted 500 mm filter - Certikin make, 1 Hp pump with pre filter - Astral make, 18 mtr hose pipe & electrical cable with trolley made in mix of MS & SS 304 with nylon wheels.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Drain grille in SS 304. 400mm x 400mm Flow: 43m3/hr including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Floor Inlets 50mm Made of ABS plastic and screws in stainless steel. Maximum recommended flow rate compliant with standard EN 13451-1: 12 m3/h.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Overflow Gutter Drain Body and grille in ABS plastic, screws in stainless steel. Application on wall. Its characteristics make this nozzle particularly suitable for overflow channels. Maximum flow rate: 4.5 m3/h.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of Suction inlet in ABS with cap internal thread of 11/2" dia and external thread 2" including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of ABS wall conduits 300mm long. including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Round Main Antivortex Drain 2" Body & Grill in ABS Grill Fitted using screws.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Floor Inlets 50mm Made of ABS plastic and screws in stainless steel. Maximum recommended flow rate compliant with standard EN 13451-1: 12 m3/h.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Overflow Gutter Drain Body and grille in ABS plastic, screws in stainless steel. Application on wall. Its characteristics make this nozzle particularly suitable for overflow channels. Maximum flow rate: 4.5 m3/h.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Suction inlet in ABS with cap internal thread of 11/2" dia and external thread 2" including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of ABS wall conduits 300mm long.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation Testing and Commision of 20 lit@3 bar metering dosing pump class on - off metering dosing pump can be manually regulated using a potentiometer that determines the frequency of injections , Regulation range of 0-100% and 0- 20%.including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of 500 litre dosing tank including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Strirrer 90cm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Ladder - 3 “Luxe” steps. Rails and steps in polished AISI-316L stainless steel (Ø 43 mm).including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Ladder - 4 “Luxe” steps. Rails and steps in polished AISI-316L stainless steel (Ø 43 mm).including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Set of 2 tubular handrails in polished S.S. AISI-316L Ø 43 mm pipe. Exit grab rails with fixing plates are supplied as a pair including fixing plates, gaskets, screws and wall plugs. 470 x 800 mm model including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Overflow Gratings Made in white, U.V. Stabilized PP. Running Length : 80 m. Width: 295 mm, Height : 22mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply Installation of Grating Support Profile Made in plastic. Suitable for grating(Supplied in 2 m length) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Overflow Gratings Made in white, U.V. Stabilized PP. Running Length : 80 m. Width: 295 mm, Height : 22mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Grating Support Profile Made in plastic. Suitable for grating including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)-Supplied in 2 m length

Supply and Installation of 90° corner tiles for overflow channels made of white, injection moulded copolymer polypropylene. Height 22 mm, channel width 295 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and Installation of Warm White LED Light 14W/12V AC FlexiSlim ABS including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and Installation of Standard Niche in ABS including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and Installation of Deck Box (Suitable to Use with Lights) IP65 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and Installation of conduit hose including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and Installation of Transformer 100VA/ 12V output IP20 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of 'Anodised aluminium Vac -Head 450mm - Clip connection including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of Telescopic Pole 3m x 3 pieces including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of Vacuum Hose 38mm- 1.5" 18m including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of Deep Bag Leaf Net - Shark Series including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of Curved Brush - Shark Series including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying of Test kit for free chlorine & pH including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supplying and fixing of 90 mm Ball valve including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supplying and fixing of 75 mm Ball valve including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supplying and fixing of 32 mm ball valve including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supplying and fixing of 110 mm flap NRV with flanges including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supplying and fixing of 90 mm flap NRV including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supplying and fixing of 110 mm foot valve including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Cepex or Equivalent)

Supply and installation of all interconnecting pipes and fittings and valves in uPVC with a pressure rating of 10kg/cm2. Make : Supreme The various pipe sizes shall be designed to achieve the following velocities of flow Quote for the supply and installation for the following pipe sizes : Estimate to include the elbows, tees and other fittings

Supply of 160mm dia PVC Pipe (10kg/cm2 Pressure)

Supply of 110mm dia PVC Pipe (Pressure10kg/cm2)

Supply of 63mm Dia PVC Pipe (10kg/cm2 Pressure)

Supply of 75mm Dia PVC Pipe (10kg/cm2 Pressure)

Supply of 110mm Dia PVC Pipe (10kg/cm2 Pressure)

All fittings and solvent

Supply of 75mm Dia PVC Pipe (10kg/cm2 Pressure)

Supply of 160mm Dia PVC Pipe (10kg/cm2 Pressure)

Supply of 160mm Dia PVC Pipe (10kg/cm2 Pressure)

Supply,installation testing commission of Control Panel c/w sheet steel enclosure, ELCBs, MCBs, O/L relays for pumps auto / pre-set (on timer) and hand controls for pumps (components are of ABB, L&T, Schneider).including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge

Supply and Installation of Starting Block Specially designed for competition events. Available with adjustable footrest to facilitate entry into the water. Its minimalist design in high quality materials gives it an elegant and modern look. Manufactured in AISI-316 stainless steel. Polished surface finish. Adjustable support (6 positions). With anchoring fixture including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge..(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Float lines supplied with floats and nylon rope including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge. Length:25m Model:Roma (Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Float Line anchors made in S.S.-316 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge. (Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Float Line Flange anchoring Socket made in S.S.-316 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge. (Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Lane Hook including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge. (Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Float Line Roller Made of S.S.-304. Mounted on 4 rotating wheels for maximum mobility and transport. 1.2m width including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of False start indicators comprise of 2 posts in S.S-316 Height : 1.8m including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge. (Make: Astral / Certikin / Jandy or Equivalent)

Supply of False start floats includes polyester cord and float 12.5 m including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Level anchor fixing in S.S.-316 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Backstroke turn indicators comprise of 4 posts in S.S-316 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Backstroke turn indicator bunting. 2 polyester cord and bunting 12.5m including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Level anchor fixing in S.S.-316 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Life Buoys including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Lifebuoy hanger made of AISI-316 stainless steel with connection to telescopic handles including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply of Reinforced Telescopic Pole 5-10m including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge.(Make: Astral / Certikin / Jandy or Equivalent)

Supply and Installation of Made in Stainless Steel AISI-304. With dismountable,base plate. Steps, Platform, chair, including parasol holder,made of polypropylene fibre-glass.Wheeled base for lifeguard chair(Make: Astral / Certikin / Jandy or Equivalent)

Providing and Fixing expansion joint filler using mastic pads of size 1200mmx600mmx25mm including material labour etc as per direction of architect and Engineer Incharge

ABIRAMI ENGINEERING CONSTRUCTION AND CO (BID ID -1043338)

SS Associates (BID ID -1043516)