Interior fit out works in office space of THDCIL at 1st floor, The Connaught, IHCL SeleQtion, Connaught Place, New Delhi

Name of work: Interior fit out works in office space of THDCIL at 1st floor, The Connaught, IHCL SeleQtion,

Connaught Place, New Delhi

BILL OF QUANTITIES (BOQ)

S.No. Sub-Head DSR NDSR

1 CIVIL & INTERIOR WORKS 2382528.86 5551866.49

2 FURNITURE 0.00 3932300.72

5 AUDIO - VIDEO WORKS 3353610.00

6 PLUMBING & FIREFIGHTING WORKS 757133.60 334208.04

A Total Amount 7159700.46 15278599.57

A Total Amount 7159700.46 15278599.57

B Total Amount including GST (DSR + Non DSR ) 22438300.03

B Total Amount including GST (DSR + Non DSR ) 22438300.03

Digitally signed by ASHWANI

ASHWANI KUMAR BANSWAL

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

2 Masonry & Plaster

3 Paving & Wet Works

4 Partitions & Wall Cladding

6 Doors & Windows

7 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 7,934,395.35

GRAND TOTAL (Carried Forward) 7,934,395.35

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

CIVIL & INTERIOR WORKS

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 15.00 93.40 1,401.00

Dismantling old plaster or skirting raking out joints and cleaning the surface for

plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work manually / by mechanical means including stacking of

1.4 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:

15.12.1 Of area 3 sq. metres and below EACH 3.00 302.70 908.10

15.12.2 Of area beyond 3 sq. metres EACH 1.00 414.55 414.55

Demolishing cement concrete manually / by mechanical means including disposal

of material within 50 metres lead as per direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 1.00 2,007.50 2,007.50

Demolishing R.C.C. work manually / by mechanical means including stacking of

1.13 15.3 steel bars and disposal of unserviceable material within 50 metres lead as per cum 1.00 2,928.10 2,928.10

direction of Engineer-in-Charge.

Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or

1.14 15.5 R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) sqm 2.00 947.10 1,894.20

as per direction of Engineer - in -charge.

Dismantling steel work in built up sections in angles, tees, flats and channels

1.15 15.18 including all gusset plates, bolts, nuts, cutting rivets, welding etc. including kg 800.00 4.65 3,720.00

dismembering and stacking within 50 metres lead.

Carriage of material by mechanical transport including loading unloading and

1.1.1 Lime, murrum, building rubbish

TOTAL OF DISMANTLING 54,516.00 0.00

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

2.1 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry,

but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 10.00 545.00 5,450.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 145.00 1,018.05 147,617.25

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick

2.5 13.4 12 mm cement plaster of mix

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

2.7 5.33 reinforcement as per direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement content in design

mix shall be payable separately. In case the cement content in design mix is more

than 110% of the specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 1.12 10,080.15 11,289.77

Reinforced cement concrete work in beams, suspended floors, roofs having slope

up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,

2.8 5.3 staircases and spiral stair cases up to floor five level excluding the cost of centering, CUM 0.30 10,719.30 3,215.79

shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size).

2.9 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 6.60 608.35 4,015.11

Walls (any thickness) including attached pilasters, butteresses, plinth and string

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 35.64 89.65 3,195.13

5.22A.6 Thermo-Mechanically Treated bars KG 134.00 89.65 12,013.10

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with

water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air

2.11 22.5 cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with SQM 18.00 516.60 9,298.80

water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air

cure for 4 hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of pipes

and masonry with polymer mixed slurry.

FILLING UNDER TOILETS AND PANTRY:- Filling and compacting ACC blocks for raising

level of toilets and pantry and finishing in a coat of lean concrete screeding with

waterproofing compound complete in all respects to take Tile Flooring as per

flooring specifications.

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

SUB TOTAL OF MASONRY AND PLASTER 314,931.86 64,005.46

3 FLOORING, PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all

colours, shades except burgundy, bottle green, black of any size as approved by

3.1 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of SQM 87.00 1,063.45 92,520.15

cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)

bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer

11.43 modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average SQM 265.00 633.60 167,904.00

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles

of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st

quality conforming to IS : 15622, of approved make, in all colours, shades, except

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1

Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

pointing the joints with white cement and matching pigments etc., complete.

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets

with Granite stone top or Solid Acylic Surface (with straight edge polished nosing)

complete with base cabinet made of 20mm BWP board, outside surface (shutters)

finished in 1mm thick Laminate of approved shade. All internal surfaces to have

balancing laminate. The rate inclusive of necessary hardware, handle lock sets, self

closing hinges, spring loaded shutter, latch inside, all cabinet hardware complete as

per Architects approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top

counter 600mm/ detailed drawings.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron

screws complete with :

11.33.1 Second class teak wood SQM 87.00 4,187.95 364,351.65

Supply of modular carpet of approved model and shade and made with 100%

nylon 6/6.6 tufted textured tiles of minimum 500mm x 500mm in size, stain resistant,

anti microbial, and having colour fastness to water, fastness to light, rubbing fastness

and castor chair suitability as per relevant standard for heavy commercial usage,

with 100% PVC free Wellbac Function Backing with having average density 6000

3.7 MR oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/ sq SQM 57.00 2,086.00 118,902.00

yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled

content complying to GRIHA requirement, including fixing with GRIHA compliant

adhesive of approved make, minimum 15 years manufacturer's warrantee, all

complete as per drawings, manufacturer's specifications and direction of Engineer in

Providing and fixing removable raised/false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50 mm, comprising of modular load bearing floor panels supported

on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per

the architectural drawings, as specified and as directed by Engineer-in-charge

(a) Providing at required spacing to form modular framework, pedestals made out

of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on

to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal

tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded

stud 16mm outer diameter with two GI Check nuts screwed on the stud for level

adjustment upto 50mm, locking and stabilizing the pedestal head in position at the

required level. The pedestals shall be fixed to the subfloor (base) through base plate

using epoxy based adhesive of approved make or the machine screw with rawl

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to

the pedestal head using fully threaded screws ensuring maximum lateral stability in

all directions, the grid formed by the pedestal and stringer assembly shall receive

the floor panel, this system shall provide adequate solid, rigid support for access floor

panel, the system shall provide a minimum clear uninterrupted clearance between

the bottom of the floor for electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled

Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel

shall be steel welded construction with an enclosed bottom pan with uniform

pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top

0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each

dome and 20 welds along each flange). The panel should be Corroresist epoxy

coated for lifetime rust protection and cavity formed by the top and bottom plate is

filled with Pyrogrip noncombustible Portland cementitious core mixed with

lightweight foaming compound. The access floor shall be factory finished with Anti-

static High Pressure laminate with Non Warp technology upto 1mm thickness for

superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in

the centre of the panel which is placed on four steel blocks. The panel will withstand

and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of

50kg all complete as per the approved manufacturers specification and as per the

direction of Engineer-in-charge. All specification must be printed on the side of the

panel to ensure the quality of the product.

600 mm Finished Floor Height (FFH). sqm 310.00 3,705.15 1,148,596.73

TOTAL FOR FLOORING, PAVING & WET WORKS 944,767.10 1,349,018.20

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

4 PARTITIONS AND WALL CLADDING

Providing and fixing partition upto ceiling height consisting of G.I. frame and required

board, including providing and fixing of frame work made of special section power

pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to

centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of

4.1 9.105 partition fixed flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at

the spacing of 300 mm centre to centre. The boards are to be fixed to the frame

work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm

width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to metal flat head

screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint

finisher and two coats of primer suitable for board as per manufacture's specification

and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

9.105.1 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with sqm 112.00 1,797.65 201,336.80

BIS certification marks)

75 mm overall thickness partition with 12 mm thick fire retardant plywood

conforming to IS: 5509

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall

paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick )

having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55

mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and

another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.

4.1 9.133 Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610

mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’

profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as

per the drawing & directions of engineer-incharge, the joints of the boards are

finished with specially formulated jointing compound and 48 mm wide jointing tape

to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

MR Paneling with 12 mm thick fire retardant plywood conforming to IS: 5509 SQM 512.00 844.87 432,571.84

GLASS PARTITIONING:- Providing & Fixing of Full Height/Low Height Aluminium

Partition-Single glazed modular system consist of Aluminium section of 40 * 25mm

thick. All sections duly anodised up to 15-20 microns with 6063-T6 grade and required

4.2 MR accessories i.e. glass to glass aluminium I sections, T section & 90 degree sections & SQM 26.00 3,792.56 98,606.66

Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile

are 25 mm visible face and 40 mm wide with 12 mm thick toughened glass &

insertion of silicon/tep gasket to adhere the glass firm & airtight.

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative /Natural Veneer of

approved design and shade , cladded on to existing partitioning. Complete

Cladding to be finished using mellamine polish (gloss/matt) as approved by the

architect. (basic rate = Rs. 456/-)

LAMINATE CLADDING- P/F 1.5 mm thick laminate including 4 mm thick MDF as per

the pattern or design required at site on an existing Plywood surface, complete with

filling of grooves with matching or contrast color, as per the direction of the engineer

ACOUSTIC FABRIC PANELLING :- Providing and fixing Acoustical Wall Paneling’ with

square edges made of fibre glass substrate 25mm thick and wrapped on the front

side with an acoustically transparent and classified for Fire reaction Class B-s1, d1 as

per EN13501, fabric with an option of colors as approved by Engineer in charge of

MR size 600X1200 mm providing a minimum sound absorption level of 0.90 NRC to be SQM 15.00 3,523.45 52,851.72

affixed to wall using Wall panel impalers supplied by the manufacturer Ltd and

construction adhesives as per the instructions laid down by the manufacturer. Panel

to be as per approved design ans shade from Armstrong, Himalayan Acoustics

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool

conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G

4.8 12.62 Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and in SQM 271.00 277.90 75,310.90

position by criss cossing GI wire etc. complete as per directions of Engineer-in-

Providing and fixing double scaffolding system (cup lock type) on the exterior side,

up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube

challies, M.S. clamps and M.S. staircase system in the scaffolding for working

platform etc. and maintaining it in a serviceable condition for the required duration

as approved and removing it there after .The scaffolding system shall be stiffened

4.10 14.72 with bracings, runners, connection with the building etc wherever required for SQM 120.00 285.00 34,200.00

inspection of work at required locations with essential safety features for the

workmen etc. complete as per directions and approval of Engineerin- charge. The

elevational area of the scaffolding shall be measured for payment purpose .The

payment will be made once irrespective of duration of scaffolding.

Note: - This item to be used for maintenance work judicially,

necessary deduction for scaffolding in the existing item to be done.

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density)

particle board or graded wood particle board IS : 3087 marked, with one side

4.9 9.18 decorative and other side balancing lamination Grade I, Type II exterior grade IS :

12823 marked, in shelves with screws and fittings wherever required, edges to be

painted with polyurethane primer (fittings to be paid separately).

Cabinet Carcass- Providing and fixing Pre-laminated flat pressed 3 layer (medium

density) particle board or graded wood particle board IS : 3087 marked, with one

4.10 side decorative and other side balancing lamination Grade I, Type II exterior grade SQM 25.00 1,501.00 37,525.00

IS : 12823 marked, in cabinet carcass with screws and fittings wherever required,

edges to be painted with polyurethane primer (fittings to be paid separately).

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick complete

with all necessary nails, hardware etc.

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

Providing and fixing special quality bright finished brass cupboard or ward robe locks

with four levers of approved quality including necessary screws etc. complete.

4.13 9.81 Providing and fixing bright finished brass handles with screws etc. complete:

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated

flat pressed three layer particle board or graded wood particle board IS:12823

marked, exterior grade (Grade l Type ll), having one side decorative lamination and

other side balancing lamination, including IInd class teak wood lipping of 25 mm

wide x12 mm thick with necessary screws and bright finished stainless steel piano

hinges, complete as per direction of the Engineer-in-Charge

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet

Shutters out of 19mm Commercial Plyboard finished in 1mm Laminate. Shutters to be

fixed to a frame. Rigidly fixed on both sides and top finshed in laminate. No internal

carcass required. The frame to be made out of 50mm X 50mm teak wood battens

finished in polish as approved. Internal Surface of the shutter in balancing white

laminate. All shutters to be provided with Stainless steel louvers at the top and

bottom of the shutter as per the site requirements and instrcution of the Engineer In

Steel work welded in built up sections/ framed work, including cutting, oisting, fixing

4.16 10.25 in position and applying a priming coat of pproved steel primer using structural steel

etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 125.00 142.30 17,787.50

SUB TOTAL OF PARTITIONS AND WALL CLADDING 456,171.10 2,201,036.82

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

5.1 12.45 nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

Including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 230.00 1,145.95 263,568.50

Providing & fixing Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in

Aluminum alloy grade 6063. The baffle blade shall be in size of 100x 25 x 3600mm in

5.2 MR Wood grain finish – Pradoo & Cabrueava. The baffle blade shall be suspended using SQM 75.00 6,739.83 505,487.09

Slotted U-profile at center-to-center spacing of upto 150mm. Longer lengths of Baffle

to be connected by Baffle Joiner and the ends to be fixed with End caps.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing

Natural Teak Veneer on 12mm Underlay commercial Ply fixed to a subframe made

using 50mm X 50mm Kiln seasoned and chmeically treated hollock wood fixed to

RCC ceiilng using Fastners . The cost to inlcude the finishing of the Veneer using

wood stain and clear coat of PU (Gloss/ Matt) as per the instructions of the Engineer

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan "pre-

5.5 MR laminated board with hardwood framing, dead locks, lapping all around including SQM 4.00 2,913.67 11,654.66

all hardware, hinges etc. complete as per design and drawing.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and

made hardwood framings hung from ceiling @1000mm centre to centre with 1 nos

of 12mm thk. fire retardant ply on vertical & 12mm thk. Commercial ply on

horizontal surface (straight & curved). Inclusive of finishing in Paint.

Providing the wooden cove of 150mm x 150mm having a facia of 75mm made out

of 12 mm thick fire retardant plywood. The cove to be finished using 4 mm thick

decorative veneer finished with PU/ melamine polish as approved. The wroks to be

done complete in all respects as per directions of engineer in charge.

Providing and fixing in true horizontal level Triangular Open cell GI lay-in ceiling tiles

with border panels forming flush-tegular edge of size 600mmx600mmx38mm having

Fire Performance Class A1 (EN13964). The tile of white color with cell size 100mm X

100mm shall be laid on white painted profile grid system comprising Main runners

(3000mm), 1200mm and 600mm cross tees with 15mm white flanges and 38mm

5.10 MR web height. The grid should with 15mm wide T - section flanges color white having sqm 32.00 7,095.00 227,040.00

rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm &

600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a

load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams

per M2 with pull out strength of 100 Kgs.

Providing and fixing of mineral fiber ceiling tiles, with hot dipped galvanized steel

grid work (Silhotte) , surface chemically cleaned capping pre-finished in baked

polyester paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre

to centre to form a grid of size 600 X 600 mm and suspending the grid from RCC roof

using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm

5.11 MR intervals. And laying mineral fiber Acoustic ceiling tiles MV B-Pin of size 600 x 600 x 15 sqm 55.00 1,630.23 89,662.57

OCR mm, of approved shade, over the formed grid having fire rating of 60 minutes

as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction Coefficient

(NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity Resistance

SUB TOTAL OF CEILING 263,568.50 998,334.39

6 DOORS/ WINDOWS

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

35MM THICK VENEER FLUSH DOOR WITH FLOOR SPRING- 35mm thick flush Doors

finished using 4mm decorative veneer (including polish) on both sides panel of size

upto 2400mm x 1050mm complete with Hardware including floor spring, Door

Closer, dead Lock with inbuilt key, D-Handle etc. including cost of teak lipping all

around with melamine/ duco finish. The item to include installation of all kinds of

latches as per the requirement.

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs

or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall

be paid for separately). (including packing wood)

9.1.1 Second class teak wood CUM 0.83 131,576.95 109,208.87

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply veneering with vertical grains

or cross bands and face veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 9.60 2,015.75 19,351.20

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

9.22.1 On one side only SQM 9.60 408.05 3,917.28

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

on all edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing wooden moulded beading to door and window frames with

iron screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on

6.9 9.84 the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 EACH 6.00 856.30 5,137.80

mm), with double speed adjustment with necessary accessories and screws etc.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123

6.10 MR with Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS EACH 6.00 2,894.71 17,368.24

forend, SS strike plate and EP Cylinder for all flush doors.

HANDLES;- Providing and fixing bright finished brass handles with screws etc.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised

6.12 9.97 (anodic AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade,

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 900x2400.

with vision panel using wired glass complete with Fire proof door frame. One side to

6.14 MR be finished in fire retardant paint and one side to be finished in Laminate of EACH 1.00 24,807.41 24,807.41

approved shade. All Frame to be finished in fire retardant paint. All hinges and

hardware to be thermatically sealed and 120 mins fire rated.

Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & spring type fixing arrangement and making necessary holes etc. for fixing

required door fittings, all complete as per direction of Engineer- incharge.

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel Factory

made UPVC Windows along with DGU/ Sandvich Glasses (6 mm Reflective Glass +

6.16 MR 12 mm ineart gas + 6 mm Plain Toughned Glass) on two tracks and SS Mesh on One SQM 19.20 7,498.32 143,967.83

Track inclding all required hardware i.e. handles, locks and other etc.,

complete as per the requirement of engineer in charge.

Supply of 75 mm Aluminium ( Grade 6063 ) Skirting with 15 micron anodising In

Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal screws. Seamless

finish. Complete with Rubber / PVC Jointers and Gasketc complete as per the

engineer in charge.

SUB TOTAL OF DOORS 238,117.05 276,943.73

7 FINISHES & MISCELLANEOUS

PRIMER: Applying one coat of water thinnable cement primer of approved brand

and manufacture on wall surface. Water thinnable cement primer.

ACRYLIC EMULSION PAINT: Finishing walls with 100% Premium acrylic emulsion paint

having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &

fungal resistance, dirt resistance exterior paint of required shade (Company Depot

Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including

priming coat of exterior primer applied @ 0.90 litre/10 sqm.

7.3 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete. Sqm 40.00 214.30 8,572.00

7.4 13.80 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the SQM 280.00 123.85 34,678.00

with and smooth

synthetic complete.

enamel paint of approved brand and manufacture to give

13.61.1 Two or more coats on new work SQM 45.00 131.45 5,915.25

Providing & fixing imported decorative Poly décor fabric Wall Paper (Object) of

weight 475 g /sqm as per approved shade & design including prepration of

surface with 2 coats of Nubin Glue based epoxy quote. (basic rate of wall paper =

Rs. 2700. per sqm)

ZEBRA BLINDS - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue part ),

Colorfastness to light - above 4 grade. Blind tube is made of Aluminum with a

diameter of 36mm, botom rail is made of Aluminumwith powder coated having

weight 390 gm/meter fitted with end caps in colour matching to thefabric and

mechanism is of plastic with chain and metal bracket. The Blinds comes with

Aluminum cover with the matching fabric designed on it. Aluminium profile should

have temper WP consisting of alloy 63400 along with anodizing of 10 micron and

powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.The control clutch driveunit engineered heavy duty chain

drive pulley operating system consisting of gear clutch housing and locking plug

containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-

lubricating Exclusive clutch with safety pins for secure bracket installation and

unlocking pin for quick manual removal. Universal clutch is most convenient for

large windows down to the smallest windows. It shall be driven by a ball chain

pulley with ball chain and can be positioned at Right hand or Left hand side of the

shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds..

Mounting hardware brackets universal brackets including end plug bracket with

lock down retainer device.Brackets finish of powder coated metal installation

brackets made of stamped and hardened steel. Roller tube circular-shaped

aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped

extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm

diameter cord with plastic balls moulded to form an endless ball chain. It is used for

raising or lowering action of the shades. Plastic parts all plastic components are UV-

stable compounds available white.

S.No. DESCRIPTION UNIT QTY RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface

7.7 M.R. with 15 yrs MCS warranty as approval of the Architect. (Only film surface area shall SQM 18.00 1,354.69 24,384.38

be measured and paid).

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass

manufactured industrially by curtain coating process with PU lacquer (50 micron

thick), opaque (if viewed against a support wall) conforming to EN 16477 standards

for back painted glass , of approved color by Architect/ Client fixed with compatible

Silicone having Shear Bond Strength (Dry, 24 hours), greater than 450 kpa and tack

free time of 10 to 30 mins compatible for installation of mirror and lacquered glass /

Foam based double sided adhesive tape for instantaneous adhesion, compatible

with mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to

7.8 M.R. 350 kpa) on a perfectly leveled 12mm thick water proof marine plywood / MDF / SQM 25.00 3,532.63 88,315.67

Mineral fibre board which is mounted on the RCC wall/any other structure. The

contractor should submit test reports for backpainted glass from manufacturer - High

humidity Resistance (conforms to BS EN 1036 1999); Color fastness ISO 105B02

standard & Mechanical Resistance ISO 7784 ( Taber Abrasion test ) ISO 2409 ( Cross

Hatch Test ) standard The manufactured backpainted glass should be

environmentally friendly (no lead, no arsenic, no copper, noformaldehyde);

appropriate recycled content (12% post industrial / 6% post consumer); compressive

strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

Providing Fire expanding foam with minimum 2 hours fire rating when tested in

accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated

floors or slabs and vertical openings in walls made of concrete/ masonry or Gypsum

for passing service shafts. The expanding foam expands seven times its volume to fill

the cavity at the time of dispensing the material and shall fully cure within two

minutes after dispensing. The service lines could be of various types like electrical

cables, cable trays or metal pipes etc. The product shall be age tested for 30 years

as per Dafstb and DIBT standards. The product shall provide water tightness when

tested for W rating as per UL standards and shall be tested for providing a sound

insualtion of 50 when tested in accordance with ASTM E 90. packing.

The Application area should be cleaned. A suitable backing material should be

used around metal pipes or electrical cables and then the FireStop sealant should

be dispended, the first few drops such that only properly mixed materials will be

used inside the opening (This can be known when the color of the foam is red and

not pale yellow).

UL Classified, FM,LPCB,BS 476-20,pr EN 1366-3 SQM 10.00 14,852.00 148,520.00

Providing and fixing of 825 CFM (min.) air curtain with MS powder coated body, of

overall dimension of 900 x 230 212mm (min.). The air curtain to have minimum air

velocity of 21m/s, noise level not more than 52 dB, consisting of 2 motors (of 0.56HP)

7.10 and 3 blowers. It shall be suitable for 220v/50Hz and using single phase supply. The each 5.00 16,516.56 82,582.79

Max./min. RPM shall be 2700/2100. The works to be done complete in all respects

inclduing all necessary fixing arrangements complete as per satisfaction of engineer-

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and

colour using approved Adhesive to 12 mm thk. Waterproof Plywood of approved

brand as per shape, pattern & details given in the drawing. The rate includes

providing & fixing beading, cutting, scaffolding, nails, all materials, labour, lead, lifts,

HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be

approved by Architect).

Hand painting directly on wall

Concept Creation

Creating design and creation of Art work concept on given subject. With initial visit to

site, preparation of various designs with different material, providing the samples,

layout for approval, improvisation in short listed creative’s and making of final layout

for final production by enlargement of drawing as per ratio of actual size, to prepare

7.12 M.R. detailed working shop drawings (full scale) based on the Concept drawings / Views SQM 4.00 8,814.00 35,256.00

/ site conditions, display of actual size dummy /mock up Fabricated in sun board

with digital print for client approval.

ARWORK EXECUTION

Towards the cost doing hand painting using artist quality

colors by qualified artists and protected by pu coating (mrf/akzonobel) all under the

watchful eyes of expert artist

Canvas paintings (oil /acrylic medium)

Concept Creation

Creating design and creation of Art work concept on givensubject. With initial visit to

site, preparation of various designs with different material, providing the samples,

layout for approval, improvisation in short listed creative’s and making of final layout

for final production by enlargement of drawing as per ratio of actual size, to prepare

detailed working shop drawings (full scale) based on the Concept drawings / Views

/ site conditions, display of actual size dummy /mock up Fabricated in sun board

with digital print for client approval

ART WORK EXECUTION

Towards the cost of doing canvas PAINTING by qualified artist including frame and

installation at site

SUB TOTAL OF FINISHES & MISCELLANEOUS 110,457.25 662,527.89

Name of work: Interior fit out works in office space of THDCIL at 1st floor, The Connaught, IHCL SeleQtion, Connaught Place, New Delhi

Sno. Item Specifications Qty Rate Amount Reference Iage

Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall

be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25

mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC

membrane pressed on to top. Soft closing access flap within-build power box are provided on

work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The

modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-

CMD Cabin 14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm

Main Table thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching

2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts

made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to

top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal

Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam

mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for

The Back Unit shall be of dimensions 2350 x 500 x 1800mm. It shall be made of 25mm thick MDF –

one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on

to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

2 approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm 1 89,020.13 89,020.13

thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have

a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is

provided with lock for security.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather

and moulded polyurethane foam. The back shall be designed with contoured lumber support for

extra comfort. Size of back shall be W-53cm, H-95.4cm & size of seat shall be W-54.6cm x D-49cm.

High Resilience (HR) foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat

and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should

be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should

be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made

of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest

shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with

M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. It shsall

have front Pivot synchro tilt mechanism. The mechanism of the chair shall have following features :

360⁰ revolving type, Knee Tilt system, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet

resting on ground ensuring more comfort, Tilt tension adjustment, 5-position locking with antilock

back mechanism which should prevent the backrest from impacting the user when the lock is

released, Static seat depth adjustment 5.0 +/- 0.5cm with 5 position locking. The chair shall be

provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The bellow

should be single piece duly blow moulded in black polypropylene. The pedestal shall be made of

die-cast aluminium with buffing finish. it shall be fitted with 5 nos twin wheel castor. The size of the

pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia (77.0 +/- 1.0 cm with castors). The twin wheel

castors shall be made of Nylon injection moulded in black color. Overall dimensions of Chair shall

be, Width of Chair - 77cm, Depth of Chair - 77 cm as measured from pedestal below. Height of

back from ground - min 128.0 to max 137.0 cms. Seat height - min 49.9cm to max 58.9 cm.

Dimensions tolerance / variations shall be within +/- 1 cm.

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather

and moulded polyurethane foam. The back shall be designed with contoured lumber support for

extra comfort. Size of back shall be W-53cm, H-73cm & size of seat shall be W-54.6cm x D-49cm.

High Resilience (HR) foam should be used in making seat & back which shall be moulded with

density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The seat

and back should be arrested together with spine made of 0.8 +/- 0.05 cm thick HR steel and should

be powder coated in black with 40-60 micron DFT (Dry film thickness). The armrest assembly should

be made up of armrest tube, PU armrest and the armrest top. The armrest tube assy. shall be made

of 2.54+/- 0.03cm x 0.16 +/- 0.0128 cm M.S E.R.W support tubes and chrome plated. The P.U armrest

shall be made up of black integral skin polyurethane with 50-70 shore 'A' hardness reinforced with

M.S insert. The armrest top shall be made up of ABS & upholstered with foam & leather. The

mechanism of the chair shall have following features : 360⁰ revolving type without back tilt. The

chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3

cm. The beloow should be made up of 3 piece telescopic type & injection moulded in black

polypropylene. The pedestal shall be made of die-cast aluminium with buffing finish. it shall be

fitted with 5 nos twin wheel castor. The size of the pedestal shall be 67.0 +/- 0.5 cm pitch-centre-dia

(77.0 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in

black color. Overall dimensions of Chair shall be, Width of Chair - 77cm, Depth of Chair - 77 cm as

measured from pedestal below. Height of back from ground - min 99.4 to max 111.4 cms. Seat

height - min 43.4cm to max 55.4 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

with leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu.

mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood

(which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section

deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is

mounted over understrucrure for cushioning effect. It should be a welded assembly made in

Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

with leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu.

mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood

(which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section

deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is

mounted over understrucrure for cushioning effect. It should be a welded assembly made in

Stainless steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm,

Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm,

Depth=60.0 cm, height=35.1 cm.

Providingin place of main table with overall size of table 1800 x 1800 x 750mm. The main table shall

be of size 1800 x 1800 x 750mm. The side unit shall be 900 x 500 x 750mm. The table is made of 25

mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC

membrane pressed on to top. Soft closing access flap within-build power box are provided on

work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The

modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-

14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm

thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching

2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts

made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to

top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal

Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam

mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm

H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer &

inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of

density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0

W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube

of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4

D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type

tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting

mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet

resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment

can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the

chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in

plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support

to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm.

The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors.

The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors

are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H

x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer &

inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of

density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0

W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube

of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4

D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type

tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting

mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet

resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment

can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the

chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in

plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support

to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm.

The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors.

The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors

are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

with fabric. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric

or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of

major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted

over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm,

Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm,

Depth=60.0 cm, height=35.1 cm.

Supplying and placing in position Main desk of the following specifications. Main Desk size shall be

1500 Width x 700 Depth x 743 Height.Top shall be of 18 mm thickness made of PLT board with 2

mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall

15 be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with 2 35,292.72 70,585.43

different combinations to support tops made with 18 mm PLT boards of different colours.Modesty

and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with

Providing locks.

and placing ALL WOOD HINGED DOOR UNIT (HDU). Size- 750mm x 450mm x 750mm.

Construction & Material Knockdown construction. Door Opening Twin door with self closing hinges

of Wood made from18mm Thick Pre Laminated Board. Handle · Aesthetically appealing recessed

plastic handle for& wooden Doors. Locking Mechanism Cam lock · 3 point locking mechanism in

Wood Door Shelving · Height wise Adjustable Shelf Mounting. Wooden Top shall be be made from

seat shall be madeof up

25 mm thk. Skirtingthick

hot High shall

pressed be provided.

plywood measuredLeveler

as perScrew type

described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded

polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood

upholstered with replaceable fabric or synthetic leather upholstery covers and moulded

polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and

hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be-

51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 76.0cm(H). The armrest top shall be made

of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular

armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps.

The mechanism of the chair shall have following features : 360⁰ revolving type, Knee tilt synchro

17 Main Chair mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, 2 19,724.49 39,448.98

Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions. The backrest shall consists of

a sliding up down mechanism, Which can be adjusted in the range of 7.5+/-0.5cm and should be

locked in 4 positions for correct position of lumber support. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestial shall be

fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection

moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-

centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall

dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from

pedestal below. Height from ground - min 101.5 to max 117.5cm. Seat height - min 46.9 to max

55.9cm. Dimensions tolerance / variations shall be within +/- 1 cm.

The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method

described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded

polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood

upholstered with replaceable fabric or synthetic leather upholstery covers and moulded

polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and

hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be-

51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be

made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular

armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps.

The mechanism of the chair shall have following features : 360⁰ revolving type, Knee tilt synchro

18 Visitor Chair mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, 4 18,097.54 72,390.16

Seat/Back tilting ratio of 1:2. Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions.

The backrest shall consists of a sliding up down mechanism, Which can be adjusted in the range of

7.5+/-0.5cm and should be locked in 4 positions for correct position of lumber support.The chair

shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The

pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with

injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm

pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon.

Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured

from pedestal below. Height from ground - min 89.0 to max 105.0cm. Seat height - min 46.9 to max

55.9cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Providing and placing ALL WOOD HINGED DOOR UNIT (HDU). Size- 750mm x 450mm x 1200mm.

Construction & Material Knockdown construction. Door Opening Twin door with self closing hinges

of Wood made from18mm Thick Pre Laminated Board. Handle · Aesthetically appealing recessed

plastic handle for& wooden Doors. Locking Mechanism Cam lock · 3 point locking mechanism in

Wood Door Shelving · Height wise Adjustable Shelf Mounting. Wooden Top shall be be made from

Pre-Laminated Board of 25 mm thk. Skirting of 125 mm High shall be provided. Leveler Screw type

adjustable Leveler with plastic base. height. Back Panel and Sides of the storageunits will be made

out from 18mm thick Pre-Laminated Particle Board. Note: All partitions and side panels have

levelling screws for adjustment in case of Uneven floor to take care of +/- 10mm of uneven flooring.

The work shall be carried out as per guidance and instructions received from engineer incharge.

Providing and placing panel & tile based modular workstation, with partition thickness as

52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of

top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear

glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric /

laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper

honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The

uprights and horizontals shall be made of aluminium extrusion having average wall thickness of

Workstation L 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on

20 shape 1500 x outer boundary of these blocks as well as intermediately at certain locations forming conduit 6 60,938.97 365,633.81

1500 for passing cables. These blocks are located in the mid segment of the panels and can be

provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be

offered in variety of combinations. The fins along the depth shall be 22.8mm thick. Screens can also

be placed in place. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping

edge banding of size 1500mm W1 x 1500mm W2 x 750D x 750H. Brackets shall be made from 2mm

thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free standing central

locking of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried

out as per the instructions and guidance received from engineer incharge.

Providing and placing panel & tile based modular workstation, with partition thickness as

52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of

top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear

glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric /

laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper

honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The

uprights and horizontals shall be made of aluminium extrusion having average wall thickness of

Workstation 1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on

21 Linear 1200 x outer boundary of these blocks as well as intermediately at certain locations forming conduit 3 49,556.44 148,669.31

600 for passing cables. These blocks are located in the mid segment of the panels and can be

provided with cutouts for mounting switch boxes (above or below the worktops). Top tiles can be

offered in variety of combinations. The fins along the depth shall be 22.8mm thick. Screens can also

be placed in place. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping

edge banding of size 1200mmW x 750D x 750H. Brackets shall be made from 2mm thick CRCA

steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size

390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per

the instructions and guidance received from engineer incharge.

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick

hot pressed plywood & upholstered with synthetic leather and moulded polyurethane foam. The

dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.8cm(W) x

75.2cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which

shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25%

compression.The adjustable armrests are designed with up-down adjustment in 8 steps(8.0+/-0.5

range). The height adjustable armrest structure is chrome plated and fitted with PU moulded over

metal insert fixed armrest top. The mechanism of the chair shall have following features : 360⁰

revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock

feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort.

The Back can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. The

chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel

castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel

castors are injection moulded in black PP. Seat can be slide horizontaly as per user convienience.

Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of

Chair - 67.5cm as measured from pedestal below. Height from ground - min 102.0 to max 119.0cm.

Seat height - min 45.0 to max 55.0cm.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide,

moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back

size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is

moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a

simple lean on the sides or back, without need for complex manual adjusments. The cantilevered

seat offers impact cushioning while seating and synchronises with the back movement during

Workstation posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the

Chair spine connector moulded in glass filled Polyamide form the back spine structure involved in multi

dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position

Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The

adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both

moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of

9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel

castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions

of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

with fabric. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

Reception 3 with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric

seater sofa or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of

major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted

over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

with fabric. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

Reception 2 with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric

seater sofa or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of

major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted

over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x

905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an

Reception 1 additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered

seater sofa with fabric. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric

or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm,

Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202

grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having

dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm,

Depth=60.0 cm, height=35.1 cm.

Worktop shall be Made of 36mm thick MDF one side 0.4mm membrance pressed on to top and

having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables.

Work top is available as per layout. The Under-structure consists of mixture of 25mm and 18mm Pre-

laminated twin board of E1-P2 grade and approved shade Edge banded with matching 2 mm

thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together.

Modesty panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade Edge

29 banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided 1 353,503.39 353,503.39

Table 16 seater

below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester

powder coated. An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder

coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6

module plate is provided below worktop. Cutout on top with two piece injection moulded plastic

part polymer component is fitted to pullout audio,video cables onto worktop and connect

devices charger to power socket below worktop.

The overall size of the wortop shall be 3600mm x 1150mm x 740mm. Worktop shall be made from

25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and

having chamfered edge. Soft closing dual access flap provided for access to power supply and

data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board

of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2

30 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for 1 114,155.13 114,155.13

improving the aesthetics.The product has a knock-down construction. A wire raiser made of 0.8mm

CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided.

Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual

Cables(eg. HDMI,VGA-A,etc).

Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection

moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded

high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per

IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be

cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size

1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm

D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm

x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be

adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the

Conference following features : 360° revolving type, front-pivot for tilt with feet resting on ground and

Head Chair contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in

seating position, 5-position tilt limiter giving options of variable tilt angle to the chair,

seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder

coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down

mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the

comfortable back support to suit individual need. the pneumatic height adjustment shall have an

adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium

and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5

nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter

and assembled to pedestal.

Providing and Placing in position High Back Chair. The seat shall be made up of 1.2 +/- 0.1 cm thick

hot pressed plywood & upholstered with synthetic leather and moulded polyurethane foam. The

dimensions of seat should be 49.0cm(W) x 51.4(D) and that of back should be 51.8cm(W) x

75.2cm(H). High Resilience (HR) polyurethane foam should be used in making seat & back which

shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25%

compression.The adjustable armrests are designed with up-down adjustment in 8 steps(8.0+/-0.5

range). The height adjustable armrest structure is chrome plated and fitted with PU moulded over

metal insert fixed armrest top. The mechanism of the chair shall have following features : 360⁰

Conference revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock

Chair feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort.

The Back can be adjusted in 5 positions manually. Stroke of height adjustable spine is 7 cm. The

chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel

castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors).The twin wheel

castors are injection moulded in black PP. Seat can be slide horizontaly as per user convienience.

Stroke of seat slide is 5 cm. Overall dimensions of Chair shall be, Width of Chair - 67.5cm, Depth of

Chair - 67.5cm as measured from pedestal below. Height from ground - min 102.0 to max 119.0cm.

Seat height - min 45.0 to max 55.0cm.

SUMMARY OF BOQ FOR ELECTRICAL WORKS

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL & DISTRIBUTION BOARD Rs. 122,296 Rs. 38,083

2 CABELS / MAINS Rs. 181,414 Rs. 19,254

4 FIXTURES Rs. 579,753

5 CABLE TRAY Rs. - Rs. 110,220

GRAND TOTAL Rs. 2,015,309

GRAND TOTAL Rs. 2,015,309

S.No Description Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

MR Design, manufacture, supply, installation, testing and commissioning of following LT switch-

gear panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall

be, Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and

vermin proof type compartmentalized design fabricated out of 14 SWG sheet steel, complete

with aluminium bus bars, separate earth bus bar to be provided through out the length of the

panel. The incoming and outgoing feeders shall be accommodated in a modular multitier

arrangement and shall be interlocked to avoid paralleling, adequate size cable alley,

painting, earthing, numbering, danger plate etc as required as per specifications and

One (1) No. 250A, 35 KA, TPN MCCB.

b) Metering & Indication :

One (01) No. digital volt, current & Frequency (VAF) Meter with in built selector switch, 250A/5A

CL-1.0,15VA CTs and control fuses.

One (01) set each of three (3) nos. phase indicating lamps with fuses.

Electrolytic high conductivity Aluminium three pole and neutral busbars rated at 300 amps

having a maximum current density of 1 amp per sq mm insulated with heat shrinkable PVC

sleeves as shown in single line diagram.

d) Outgoings :

One Nos 100A TPN MCCB 25 KA

Three (3) Nos. 40 A, 10 KA, TPN MCBs "C" curve type

Five (05) Nos. 32 A, 10 KA, TPN MCB "C" curve type

MCCB shall be provided with thermal magnetic protection releases for short circuit & overload

MCCB shall be (Ics=100% Icu) with 0.8 - 1 x In adjustable overload protection release.

MCCB shall be provided with spreader terminals, phase barriers and rotary handle operating

DISTRIBUTION BOARDS :

Supply ,Installation, Testing & commissioning of following double door type distribution boards

fabricated out of 16 SWG, CRCA sheet steel recessed in wall or surface mounted.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.1 6 way , Double door Each 1 1,661.00 1,661.00

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

2.3 2.10 suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

2.5 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Total of DB carried over to summary 122,295.53 38,083.00

3.0 CABELS / MAINS

8.4 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of

following size in the existing masonry open duct as required.

b 8.4.2 Above 120 sq. mm and upto 400 sq. mm Meter 150 96.00 14,400.00

Supply of 1100V grade armoured cable having sector / circular shaped aluminium / copper

conductor PVC insulated cores under ground PVC tape wrapped inner sheathed, GI strip /

3.2 wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on wall or

ceiling using GI clamps and spacers as per route shown at site and further as directed by

Engineer-in charge

a MR 185 Sq.mm 3 1/2 core Aluminium cable mtr. 150 1,209.43 181,414.31

9.1 Supplying and making end termination with brass compression gland and aluminium lugs for

3.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Total of Cables / Mains carried over to summary 181,414.31 19,254.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade

1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in & including

4.1 1.3 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732 including all

accessries such as junction boxes , conduit bends, elbows and ceiling rose , and anodised GI

switch box with modular switch ,modular plate and the box covered with front plate

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

4.3 1.3.3 Exhaust fan point including of ceiling rose near fan. - Primary - Group-C Per Pts 5.00 1,213.00 6,065.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable GI Per Pts 45.00 1,290.00 58,050.00

box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 240.00 111.00 26,640.00

d 1.24.5 6 pin 15/16 A socket outlet Each 60.00 175.00 10,500.00

e 1.24.7 TV antenna socket outlet Each 6.00 119.00 714.00

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for

modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing Meter 120.00 33.00 3,960.00

surface/ recessed steel/ PVC conduit as required.

4.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 80.00 133.91 10,712.41

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 1.20 including painting in case of surface conduit,or cutting the wall and making good the same in

case of recessed conduit as required

Total of Wiring carried over to summary 10,712.41 953,576.00

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) downlights

with maximum 12 Watt with minimum 1320 lumen.The product should be SMD based & have

non integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF >0.9,Product should

have life class of 50K burning hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D.

Internal wiring should have teflon coted multi strand wires and external wire should have PVC

coated multistrand wires.

SITC of Extruded Aluminium surface mounted 36Watt, 4000 lumen LED batten with PC Diffuser

and Spring Steel Clamps for Surface Mounting arrangement. Driver THD<15%, PF >0.9,with 2KV

inbuilt surge protection. Internal wiring should have teflon coted multi strand wires and external

wire should have PVC coated multistrand wires.

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed type linear

Luminaire of size 72mm (N.S.), Linear ultra modular fixture made up of extruded aluminium

housing with luminare efficasy more than 100 LPW, CRI >80, CCT of 5700K. suitable for 220 V,

50 Hz, The luminare rated life (L70) >50000 Hours with High efficiency driver with inbuild surge

protection, over voltage protection, short circuit protection and operating at >0.95 .making

suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. The price shall include

all accessories including jointing kit for uniform continuous lines of light across ceiling etc

complete in all respect

Providing & Fixing Coverings (Ceiling & Wall) Made out of Polyester Kintted fabric Coated with

polyurethane (PU). The Fibric width 2m,3m,4.1m,&5.1m with Weight of 200gm/m^2. thickness of

0.3mm. The appearance of fabric is Matl. smooth and uniform with blance color and ligth

transmission of 50%. The tear strength of febric should be accordance to CH. 4.5daN; TR: 6.5

daN. The fire Railing should be accordance to B-S1, do. The febric should be humidity ressistant

and free of cercinogenic subtance (CMR) or volatile organic compounds (VOC's). At lableing

in accordance with the French decree no, 2011- 321, Oeko -Tex standar100 certified. The

fabric should be paintabe/printable with approved manufacturer guidelines with 10-year

5.5 MR manufacture guarantee. the Installation of fabric should be dry installation 7done at room Sqm 5.00 12,297.00 61,485.00

tamperature using CLIPSO PVC, ASB tension profiles P.CC/P-C10QS/P-C11QS/P-CCB022/P-B1/P-

CC1P. There are several lighting options available including various LED options and

fluorescent lighting. When Positioned properly. LED Lighting modules provide an even light flow,

casting no shadowns or hot spots. coverings are used for a variety of aluminated applications,

including but not limited to walls, ceiling, lightboxs or wall frames. coverings can enhance your

door with a variety of spacial effects fiber optics or changinglights, or create a statement

piece incorporating custom printing. The cost of electrical cove light fixtures is included in the

Providing & Fixing High Speed 450 mm Wall Fan, complete with all hardware and connectors

etc., as per the direction of the engineer In charge

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Providing & Fixing Waterproof LED Rope / Cove Light having 400 Lm per meter (72 LEDs per

5.8 MR meter) of any color, , complete with all hardware, connectors, drivers etc. , as per the direction RMT 150.00 211.00 31,650.00

of the engineer In charge.

Supply, Installtion, Testing & Commissioning of Recess Mounted circular 15W LED downlighter

with pressure diecast aluminimum housing, high efficiency PMMA diffuser complete with

electronic LED driver, PF>0.9, THD<10%, rated life of L-70 @ 30,000 hours having minimum

5.9 MR lumens output of 2100 lumens and efficacy better than 80 lumens / watt with CRI> 80 including Each 28.00 3,840.00 107,520.00

fixing in false ceiling & connection with 3x1.5 Sq.mm. PVC insulated FRLS copper conductor

cable in flexible metalic conduit etc. as required. With Dali dimmable driver.

Supply, Installation Testing & Commissioning of DIN - rail mounted Dali dimming controller to

5.10 MR control mimium 20 lights at a time i/c power supply at 220-240V, 50 Hz. i/c connections etc as Each 2.00 4,000.00 8,000.00

Supply, Installation Testing & Commissioning of occupancy sonsor with 3 adjustable onboard

knobsm (1) off time, (2) light sensitivity, (3) motion sensitivity; detection angle - 360 degrees. It

5.11 MR shall have (1) main PIR sensor (motion sensor) working to detect human body movements; (2) Each 30.00 3,098.84 92,965.07

light LUX level sensor, etc as reqd. complete in all respects.

Supply, Installation Testing & Commissioning of button wired/wireless keypad infrared receiver

complete with mounting back box </75mm (W) X 75mm (H) X 35mm (D), engraving codes with

front plate in arctic white finish, including batteries complete as required.

SITC of 2'X2' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600

lumen. The product should be SMD based and have non integral isolated driver with 3KV

inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at

L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have teflon

coted multi strand wires and external wire should have PVC coated multistrand wires.

Total of Light Fixture carried over to summary 579,753.45

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated

out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with

7.1 providing of Anchor fastners and all necessary hardwares as required for fixing, including

cutting, bending, welding, drilling, bolting etc. as per design as required and painted with one

coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of following

sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required for fixing and

including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth strips complete

as per specifications, as required and as below.

Total of CABLE TRAY carried over to summary 0.00 110,220.00

SUMMARY OF BOQ FOR Low Voltage WORKS

S.NO. SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 Data & Voice Rs. 111,306 Rs. 347,195

2 RODENT REPELLENT SYSTEM Rs. - Rs. 77,545

3 FIRE DETECTION & PA SYSTEM Rs. - Rs. 711,867

4 ACCESS CONTROL SYSTEM Rs. 585,290 -

GRAND TOTAL Rs. 1,833,203

GRAND TOTAL Rs. 1,833,203

Low Voltage works

S.No Description Unit Qty Rate MR Amount DSR Amount

1 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-III)

complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/

PVC conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in

wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 105.00 119.00 12,495.00

1.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring

a shuttered front access for preventing ingress of dust, dimension as per commercially Nos. 70.00 95.72 6,700.20

available modular office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (RJ45 for data ) and (RJ-11 for voice) or as

b. required square plate having spring shuttered front access for preventing ingress of dust, Nos. 70.00 95.72 6,700.20

dimension as per commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or in

existing pipe as required and includig making terminal joints, complete as required.

Supplying, installing, testing and commissioning of 24 port Cat 6 patch panels available with

block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded

CAT6 U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less

connector U/UTP unit in a block.

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D'

Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass

Door,Injected one piece polyurethane gasket on frame, Accessories: Cooling Fan (230V A/C

90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets

1.8 with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2 EACH 1.00 38,551.38 38,551.38

Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling

Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels

(without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP

foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as

Total of Data & Voice carried over to summary 111,305.95 347,195.00

2 RODENT REPELLENT SYSTEM

Supply, installation, testing & commissioning of rodent repellent system comprising of following

2.1 items comlete in all respects including all necessary fixing hardware as required complete to

the satisfaction of engineer-in-charge.

a Master control unit Nos. 1 28,210 28,210

b Satellites or Transducers Nos. 10 2,825 28,250

c Brackets & Stands Nos. 1 1,710 1,710

d Hooter Nos. 1 2,455 2,455

e 2 C x 1.5 sqmm copper conductor FRLS Armored Cable Rmt. 120 141 16,920

Total of Rodent repellent system carried over to summary 0.00 77,545.00

Project : JEEVAN TARA BUILDING

ESTIMATED COST FOR FA & PA SYSTEM

3 SITC OF FIRE ALARM AND PA MR. DSR.

DSR Total Total

Sr. No Description Unit Qty Unit Rate

2018.No. amount amount

Supplying, installation, testing & commissioning of repeater panel wih 320 character/

Touch screen LCD display with inbuilt reset, acknowledge and silence switches

3.1 17.2.3 complete as required. Each 1.00 108,572.00 108,572.00

Supplying, installation, testing & commissioning of intelligent analog addressable

photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal

detector with rate of rise cum fixed tempreature thermistor complete with base as

Supplying, installation, testing & commissioning of addressable manual call point

3.4 17.2.14 complete as required. Pcs 3.00 3,859.00 11,577.00

Supplying, installation, testing & commissioning of addressable horn cum strobe

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commissioning of response indicator on

3.7 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Pcs 12.00 263.00 3,156.00

connections etc as required.

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with

annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer

3.8 17.5.2 sheath complete as required. RM 250.00 141.00 35,250.00

SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with

USB, MP3 player (including 6 zone button paging station) with seamless integration

3.9 17.3.1 facility with main fire alarm panel for voice evacuation complete as required. Pcs 1.00 126,399.00 126,399.00

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt , 25V

3.10 17.3.6 rms operating at 240 volt AC supply complete as required. Pcs 2.00 96,767.00 193,534.00

Supplying, installation, testing & commissioning ofceiling/wall mounted loud speaker,

3.11 17.3.4 3/1.5 Watt in ABS enclosure complete as required. Pcs 18.00 2,416.00 43,488.00

CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor

cable in the existing surface / recessed steel conduit of following pairs, cores and size

3.12 17.5.3 including connections and interconnections etc. as required..

speaker cable Single pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all

3.13 17.5.4 ancillaries and accessories like coupler etc. as required. RM 350.00 50.00 17,500.00

BOQ - Fire ALarm PA system

Electrical Consultant : DCS Consultant Sons

ACCESS CONTROL SYSTEM

Sr. No Description Unit Qty Rate Amount

1 ACCESS CONTROL SYSTEM

Supply, Installation, Testing & Commissioning of Access Control System

with Face detection & face mask detection device, Dual Core processor

1G Memory+8G EMMC, Linux OS with RFID, Support T card

storage5inches IPS H screen, vertical viewing angle. 30, horizontle 30, 1/2"

1.1 progrsive scan CMOS, 6mm lence, voice playback for alarm access, Nos. 6 50,177.00 301,062.00

recognition height 1.2-2.2 meter, angle adjustable, 0.54-1.5 mter

distance, FAR 0.10%, 0.01%, 60000 capture records face capacity 10000

pcs, duan camera, 2MP 1920x 1080 205x95x20 mm inclusive of of Power

Supply 12V 2 A for Access Control Reader and Door Lock Unit, Complete

Supply, Installation, Testing & Commissioning of 8 Door eader IP

Controller accommodates a card database of 55,000 cards, and a

transaction buffer of 45,000 transactions,TCP/IP, USB, Serial Interface unit,

Relay Switching Port.

1.3 Supply, Installation, Testing & Commissioning of Mi fareProximity Cards. Nos. 50 283.00 14,150.00

Supply, Installation, Testing & Commissioning of Electromagnetic Lock

1.4 600 lbs, single leaf, LED Status Display, includes Door Sensor, i/c making Nos. 6 2,835.00 17,010.00

conection, integration, testing etc. complete as required on site

Supply, Installation, Testing & Commissioning of Alagtech U/L Clamp

made of aluminium anodised for EM Lock on the surface of

frame/structure etc. i/c alignment etc. for smooth operation of EM lock

Supply, Installation, Testing & Commissioning of 16 Port POE Gigabit

Switch, Auto MDI-MDIX for all port,Link Status Detection, 4.8 Gbps

Switching Capacity, Rack Mountable, Complete in all Respect as

required at site.

Supply, Installation, Testing & Commissioning of Access Control Software

for with Advance Access Management Module & Advance Attandence

1.7 Mangement Module. It should support Multi company, Multi location, Nos. 1 42,948.00 42,948.00

Multi department, Multi login with different rights, Muti hierarchy of

Supplt insytallation testing and commissoning of All in one Desktop -AMD

1.8 Ryzen™ 5 processor Windows 11 Home 512 GB PCIe® NVMe™ TLC M.2 Nos. 1 70,870.00 70,870.00

SSD 8 GB RAM, AMD Radeon 60.5cm Diag.

Total of Access Control System carried over to summary 585,290.00

Audio - Video works for Office space of THDC at Cannaught Hotel

S.No Product Description Unit Rate Amount

98" LED Display with in-built Intel Core i7 PC having minimum 4 GB RAM and 500GB HDD, Wi-fi

support, Windows 10 + Android OS. It should support TV remote. Should have; Inputs: AV - 2,

RF - 1, VGA - 2 (1 in front), TF - 1 Ypbpr - 1, MIC - 1, Front Audio - 1, HDMI - 2 (1 in front), RJ-45 -

1, DVI-D - 1 Fast switching between Android and Windows is must.

55" Full HD LED display, HDMI X 2, VGA X 1, Video IN X 1, USB X 1, Audio IN X1, Audio Out X 1,

2 SPDIF X 1, RS232C x 1, 20W in built speaker, IPS LED display, USB media player NOS 3 65,192 195,576.00

Supply, Installation, testing and commissioning of Ceiling Microphone tile with 28 or more no.

of omni directional microphone, coverage area : 55sq mtr or more, Dante connectivity :

dual / redundant, POE enable (qty of microphone will vary as per the mentioned coverage

area and built in micorphone), Lighting Indication on all four corner, It should work on open

control protocol software and compitable to monitor with a single sofware for all the

microphone in the campus etc complete required as per the specifications.

Supply Installation Testing and Commissioning of digital signal processor with minimum 6no.

Or more Mic / line input with phantom power and AEC and 6 or more line output, at least 2

channel of USB input and output for software Video Conferencing,, Should have sampline

4 rate of 48kHz or better, Should be expandable for port expansion. 4x4 or more Dante Input each 1 273,720 273,720.00

for Digital audio transfer as per need,should support Control with App via iOS and Android

devices, or any third-party control system, Shall have Built-in filters, feedback suppression,

AGC etc complete as required as per specifications

Supply, Installation, testing and commissioning of 8" two-way coaxial thin edge ceiling

loudspeaker, 100V transformer power taps : 24,12,6, watts, Conical dispersion : 140° or more,

5 impedance : 8, low impedance RMS continous power : 40watts, frequency range : 40 Hz - 20 each 8 17,116 136,928.00

kHz or better, frequency response : 50Hz - 20KHz or better etc complete required as per

specifications.

Supply, Installation, testing and commissioning of Quad channel energy star rated stereo

digital power amplifier, Technology : Class-D, Temperature controlled FAN, Switching mode

power supply, built in DSP, Protection : DC Short circuit & Over heating & Over load & Signal

limiting & Power limiter, Frequency response : 20 Hz - 20 kHz, RMS Power @ 4 Ω Stereo : 4 x 240

Watt or more, RMS power @ 8 Ω Stereo : 4 x 120 Watt or more etc complete required as per

specifications.

Supply, Installation, testing and commissioning of wireless presentation device which support

Airplay, Miracast, web browser.

8 Supply, Installation, testing and commissioning of 8 port POE Gigbit Ethernet switch each 1 17,195 17,195.00

AV Equipment rack as per the equipment required.NOTE: Rates to be inclusive of all Cables

9 & connector required for nessecary connection and integration and operation of the each 1 28,659 28,659.00

complete system.

This HDMI Switcher/ Splitter 2x4 can connect 2HD signal sources with 8HD display terminals. It

can easily split 2-way HD signal sources to 8 HDTVs or projectors which support HD. It also can

amplify the HDMI signal. The two input HD signal sources can be switched freely. The HDMI

Switch/Splitter 2x8 can support highest video resolution 3840x2160/30hz,Compatible with fully

HDMI 1.3/1.4 Specification compliant. buffer HDMI signals at the same time, HDMI or DVI to

HDMI cables used for inputs and outputs. Included IR remote adapter for operational

flexibility and easy control, no manual clicking the select button needed. Support single high

definition display and multiple output HD signal sources, such as DVD Players, A/V

receiversand Set Top Boxes, 360 Sky Box Freesat Virgin Bluray Player DVD HDTV Projector

Camcorder HTPC Laptop

Cable cubby -SITC of cable enclosure with tilt up lid Multiregion power socket, , Pass

11 through holes for HDMI, Audio, VGA & LAN connectivity etc. as required Complete as per each 2 15,012 30,024.00

specification & as required.

Supply, Installation, testing and commissioning of wireless digital boundary layer Microphone

with 18 or more channel, RF output 80mW or more, Cardioid pickup pattern, Frequency

12 range : 1880 to 1930 MHz, Connectivity : RJ-45, 256-bit AES Encryption (specifications NOS 2 150,799 301,598.00

includes single microphone set of transmitter and receiver) etc and complete as required.

Supply, Installation, testing and commissioning of wireless digital microphone charger,

charging capacity : 2 or more simultaneously with lighting indication, Qi charging, Should

be from same OEM as of wireless mic etc and complet required as per specifications.

BOQ FOR PLUMBING & FIRE FIGHTING

DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 0.00 254493.61

B WATER SUPPLY 188678.90 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 208895.70 25548.72

D SPRINKLER PIPING & ACCESSORIES 359559 54165.71

Total Cost ( Carried Forward) in Rs. 1,091,341.64

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

DSR - DSR Rate NS Rate

SL. NO. DESCRIPTION OF ITEMS UNIT Qty Amount NS Amount (Rs)

1.1 Providing & fixing glazed vitreous china single trap syphonic

pattern having back inlet ,supporting chair ,wall hung water

closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European type)

water closet with seat and lid, with C.P. brass hinges and

rubber buffers, adapter, rubber joints fixed to W.C., C.P.

brass screwed washers including cutting and making good

the walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete

in all respects

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 19951.19 79804.78

1.2 Providing & fixing glazed vitreous china wash basin with R.S.

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P.

brass bottle trap and union 32 mm dia C.P. pipes to wall

flange. complete including cutting and making good the

NS walls wherever required.

Undercounter wash basin (White colour)of size: 585x430 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 3 8077.16 24231.47

1.2.2 NS Table top wash basin (white colour)of size: 440x440 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 10434.84 10434.84

1.3 Providing & fixing 15mm C.P. brass single hole wash basin

mixer without popup waste system with 450mm long copper

NS pipes and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 2939.72 11758.87

1.5 Providing & fixing stainless steel sink R.S. or C.I. brackets

painted, 40mm C.P. waste, C.P. brass chain and rubber

plug, 40mm C.P. cast brass bottle with necessary union

complete including cutting and making good the walls

NS wherever required

Stainless steel sink single bowl with drain board(size

510x1040mm) of approved

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 11933.04 11933.04

1.6 Providing & fixing Sink Mixer with Swinging Casted Spout

(Wall Mounted Model) with 450mm long Copper Pipes &

NS Brass Nuts.CP brass wall flange

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 3694.17 3694.17

1.7 Providing & fixing toilet paper holder including cutting and

NS making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 1672.39 6689.56

1.8 Providing & fixing Horizontal liquid automatic soap dispenser

with stainless steel lid and brackets fixed to wooden cleats

NS with C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 3579.33 14317.31

1.9 Providing & fixing C.P. brass coat hooks fixed on toilet door

NS with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 605.30 2421.19

1.10 Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as

NS per design including polishing

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Sqm 9 2020.91 18188.17

Providing & fixing Hand Shower (Health Faucet) with 8mm

NS dia, 1M long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 4 1730.56 6922.25

1.12 Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 19015.73 19015.73

1.13 Providing & fixing wall mounted 25 mm dia Stainless steel

coated grab bar including cutting & making good the

NS walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 912.33 3649.31

1.15 Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

NS wall flange of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 8 1566.66 12533.26

1.16 FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and

'C' size battery (2 Nos) for operation fixed to wooden cleats

NS with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 5 4534.90 22674.51

1.17 Providing and fixing of stainless steel finish Paper Towel

Dispenser having capacity of 300-350 paper towels fixed to

NS wooden cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 4 1556.29 6225.16

i. Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall

be selected by Architect/Interior designer/Project manager

and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of

sanitary fixtures.

iii. Contractor to receive all the above mentioned items & store

at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 254493.61

SUB HEAD B: WATER SUPPLY

SL. DSR - DSR Rate NS Rate

DESCRIPTION OF ITEMS UNIT Qty Amount Amount

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.6 50 mm nominal outer dia pipes. Metre 80.00 927.00 74,160.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This including jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the the same including testing of joints

complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 40.00 513.75 20,550.00

18.8.3 25 mm nominal outer dia pipes. Metre 40.00 626.05 25,042.00

18.8.4 32 mm nominal outer dia pipes. Metre 80.00 712.75 57,020.00

Providing and fixing brass stop cock of approved quality

2.3 18.16 complete.

Providing and fixing gun metal gate valve with C.I. wheel of

2.4 18.17 approved quality (screwed end):

Providing and fixing C.P. bass angle valve for basin mixer and

geyser points of approved quality conforming to I.S:8931 a) 15

2.5 18.53 mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 14.00 107.90 1,510.60

Sub-Total of Water Supply Installation, Separate for Scheduled &

Non-Scheduled Items 188,678.90

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR Rate NS Rate NS Amount

DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs)

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as

3.2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 80.00 1,077.40 86,192.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 60.00 1,042.10 62,526.00

Providing and fixing single equal plain junction of reqd. degree with

3.3 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43 complete.

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 731.40 2,925.60

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 573.80 2,295.20

Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 707.30 2,829.20

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 498.90 1,995.60

Providing and fixing bend of required degree with access door,

3.5 17.38 insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 597.60 1,195.20

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6.00 453.40 2,720.40

3.6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6.00 439.75 2,638.50

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6.00 289.75 1,738.50

3.7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 409.45 818.90

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 256.30 512.60

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks

3.8 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and

17.37 making good the walls etc.

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval

17.65 quality) for new work

a 17.65.1 100mm dia cast (spun) iron S&S pipe Metre 80.00 64.20 5,136.00

b 17.65.2 75mm dia cast (spun) iron S&S pipe Metre 60.00 48.85 2,931.00

Providing lead caulked joints to sand cast iron/centrifugally

3.13 17.58 cast(spun) iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

3.14 17.36 mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

SITC of 3 HP submersible sump pump for sewage disposal complete

with sewage disposal pipe to the nearest wet point. The works to be

done complete in all respects as per instructions of engineer in

Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 6.00 798.80 4,792.80

Sub-Total of Drainage Installation, Separate for Scheduled & Non-

Scheduled Items

SUB-HEAD - D - SPRINKLER PIPING & ACCESSORIES

DSR - DESCRIPTION OF ITEMS DSR

SL. NS Rate DSR Amount NS Amount

2019/N UNIT Qty Rate

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

1 on the wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of required shade

complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

2 bolts, washers, gaskets conforming to IS 13095 of following sizes as

Providing and fixing ISI Marked of approved make Fire Extinguishers

3 complete with all accessories as per manufacturer's specifications.

CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 2 8,188 16,376.36

ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 14 1,830 25,620.81

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb

4 type sprinklers of rating 68 degree centigrade with required accessories

4.1 21.2 Uprigth Sprinkler NOS. 45 484 21,780.00

4.2 21.4 Concealed Sprinkler NOS. 45 1397 62,865.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe

(UL Listed) of stainless steel complete with 15 NPT on reducer thread

with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst)

5 with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side brackets, center

bracket, stockbar of following sizes complete as required.

Providing, jointing and testing of automaticaly operated Halotron fire

extinguishers(cap-5kg,temperature rating-68degc,test pressure-30bar)

6 complete with all accessories/fittings.

TOTAL CARRIED TO SUMMARY 359,559.00 54,165.71

1.0 DSR 2019 Ref. No. VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular

type Variable Refrigerant Flow/ Variable Refrigerant

Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll

Compressor(s), minimum two compressors for above 14 HP

modules, microprocessor based Controller, top discharge

type condensing unit(s), with R410A Refrigerant, vibration

1.1 isolators, with suitable foundation etc. complete as Per HP 48.00 16,415.00 787,920.00

required.The unit shall deliver the rated capacity at AHRI

Conditions and work even at 50°C ambient temperature

without tripping.The unit shall be suitable to work on 400V+/-

10%, 3 Phase, 50Hz AC power supply.The unit shall be filled

with first charge of the refrigerant and ready for use as

required.The COP at AHRI conditions shall not be less than

3.1 and IEER not less than 6.5 .

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following

minimum capacity 4-wayflow VRV/ VRF Cassette Type

Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise fan/

dynamically balanced blower, multi speed motor, coil

section with DX Copper coil, electronic expansion valve,

outer cabinet, drain pump, grill, necessary supports,

vibration isolation, cordless remote control etc., suitable for

operation on single phase 230V±10%, 50 HzAC supply,

complete, as required. The unit shall have automatic force

shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at

air inl et conditions of 27 Degree CD Band 19 Degree CWB

4-Way Cassette type (pump included)

3.0 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal

sizes of soft/ hard drawn copper refrigerant piping for VRV/

VRF system, complete with fittings, with suitable adjustable

DSR 2019 ring type hanger supports, jointing/ brazing including

VRF/VRV accessories, insulated with XPLE Class-O tubular insulation/

with Class-O closed cell elastometric nitrile rubber tubular

sleeves sections of specified thickness as given below for

Suction and Liquidlines, allaccessoriesasperspecifications

etc. as required :

3.1 5.1 34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm) Rmt 95.00 1,230.00 116,850.00

3.2 5.8 28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 62.00 1,108.00 68,696.00

3.3 5.6 22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 62.00 865.00 53,630.00

3.4 5.5 19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm) Rmt 55.00 707.00 38,885.00

3.5 5.4 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm) Rmt 87.00 588.00 51,156.00

Supplying and installing of following size of perforated hot

dip galvanized G.I cable tray with perforations not more

than 17.5%, in convenient sections, joined with connectors,

suspended from ceiling with G.I suspenders including bolts

4 MR and nuts, etc. for carrying refrigerant pipe in outdoor

application as required.

4.1 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 30.00 1,112.23 33,366.83

4.2 225mm width x 50 mm depth x 1.6 mm thickness Rmt 55.00 716.47 39,405.61

5 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC

Pipe ,complete with fittings, supports,U trap

arrangement,Clean Plug with 6mm nitrile insulation and

accessories as per specifications, drawings.

6 MR Imported fittings Y-joints and headers etc. Nos 25.00 1,337.94 33,448.44

Providing and fixing control cum transmission wiring of 2

7 MR core x 1.0 sq. mm copper in suitable conduits between Mtr 485.00 112.21 54,421.55

indoor and outdoor unit.

SITC of 1.0 T split with rotary compressor of 5 Star rating

Inverter technology approved make make inclusive of 5

8 MR year warranty on compressor all complete. (Note- Indoor Nos. 2.00 44,553.32 89,106.65

and outdoor unit should have copper Condensor and

9 MR Timer for Split ac for Server Nos. 1.00 3,810.71 3,810.71

Provision for Fresh air ducting by 100mm flexible insulated

10 MR duct from Indoor to Outdoor unit including clamp etc Rmt 450.00 517.50 232,875.00

Total Amount 2,278,140.66

Total Amount 2,278,140.66