Dindigul District Ayyampalayam Town Panchayat 15 CFC - Tied -Ist Ins. Providing watersupply facilities and Repair and maintenance of Toilet at 3rd ward church opposite in Ayyampalayam Town Pannchayat

Amount

Watersupply Facilities and Repair and Maintenance of Toilet

Dismantling ,Clearing away and Carefully Stacking the Materials Useful For Reuse including all labour charges and all other incidental charges etc., Complete as per standard specification

Brick Work in Cement Mortar Walls under 3M Height

Chipping of Concrete and Roughening the surface

Earthwork excavation for foundation in all soils and sub soils except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth,well rammed and consolidated with initial lead of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers etc., complete as per Standarad specification SS20B(TNBP No.17,23,24).

Plain Cement Concrete 1:4:8 mix Using 40mm ISS HBG metal for foundation and basement including cost and conveyance of materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications(TNBP No.28).

Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86(For Drain Side Wall)

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc.complete complying with standard specification (TNBP No.30)

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Reinforced Cement concrete 1:1 1/2:3 (One Part of Cement, One and Half Part of Fine aggregate and Three Part of Coarse Aggregate) using 20mm sizeHBGS jelly for all RCC items of work excluding Cost of centering and reinforcement but including cost and conveyance of materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications (TNBP No:30)

Supplying and fixing of M.S grill of approved design for doors, windows,ventilators and Openings using necessary M.S.Flats for inner and outer members which should be fixed to Openings inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Plain Cement Concrete 1:2:4 mix Using 20mm ISS HBG metal for foundation and basement including cost and conveyance of materials to work site and all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (One part Cement, Two part fine aggregate and Four part Coarse aggregate) using 10 to 12mm ISS HBG Stone Jelly of 25mm tk etc., Complete. including cost and conveyance of materials to work site & labour charges for mixing,laying,finishing and Curing etc,complete as per standard specifications.

Brick Work in CM 1:5 mix using Second Class Bricks of Size 9 " x 4 3/8" x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, Finishing and curing etc., complete as per standard specifications – TNBP No:31

Plastering with CM 1:3 mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying,finishing and curing, etc., complete as per standard specifications – TNBP No:30,56&57

Plastering with CM 1:5 mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying,finishing and curing, etc., complete as per standard specifications – TNBP No:56&57

Supply and fixing of cudapah stone slab 50mm thicknees for cupboard arrangement including polishing etc., complete and as directed by departmental officers

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the propotion of brick jelly to lime being 32:121/2 by volume and laid over in a single layer and consolidated to the required design and finished thickness , beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wetted by sprinkling lime jaggery water as per standard specification-.TNBP No:44-I

Finishing with top of roof with one course of machine pressed tiles of size 23cmx23cmx2cm of approved quality laid in cement mortar 1:3 (One Part of cement and three Part of Coarse aggregates) 12mm thick mixed with WPC by 2% weight of cement used and the joint pointed with same motar mixed with red oxide, etc.complete complying with standard specification - TNBP No:44-I

Laying with first quality design Colour ceramic tiles of size 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 - 20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification

Daddoing with first quality colour glazed tiles of 300 mm x 200 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2and pointing with white cement neatly including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification.

Supply and fixing of Indian water closet of 22” Oriya type of approved quality & approved colour with “P” or “S” trap with fine aggregate cushion and forming flooring around the water closet using 40mm size broken brick jelly in cement concrete 1:2:4 of 4” thick and plastering with cement motar 1:3 20mm thick using fine aggregate including fixing the water closet in position and giving necessary connection to CI stacks etc. complete including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification .TNBP No. 100,102 & 103

Painting two coats with ready mixed Plastic Emulsion Paint of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification - TNBP No:66-A

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification (New Iron Surface).TNBP No:66&66-A

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26)

Supply and fixing of 7/9 Watts LED (Like OSRAM,PHILIPS Etc) Including all charges as Directed by the Departmental Officers Etc,Complete,

Supply and deleivery of Single Phase SUBMERSIBLE PUMPSET for Bore well WITH ISI MARK IS 8034/2002 WITH PANEL BOARD of 1.50 HP of duty condition 20 lpm x 150 m etc complete as per standard specification SL.NO3.1 (78.)

Supply and delivery of pvc &GI specials including cost for materials and all labour charges for completed

4.0 Sqmm Submersible Cable

32mm GI pipe

Bore cover

Bore Clamp

32mm G.I. Elbow

32mm GI coupling

32 mm G.M Non return Valve

32 mmG.M Gate Valve

32mm GI pipe Bore to Street

Labour charges for the Erection of submersible pumpset in borewell/open well including fixing and jointing submesible cable with proper clamps upto the starter to requied depth and also fixing of riser pipes to the requird depth valves erection clamps etc, complete.

Supplying laying and jointing P.V.C pipes (6Kg / SqCm) of approved quality conforming to I.S.O/ I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.(For 20mm Dia PVC Pipe )

Supplying and Fixing of Following materials Including Cost of materials and all labour charges etc,complete as per standarad specification.

20mm Dia PVC Tap

1000Ltr Capcity HDPE Water Tank

Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141)

supply and fixing of TNEB meter board suitable for 32 A Three phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1"X18" copper flat) on TW plant of size 600mm X 450mm X19 with supporiting TW reepers of 1 " thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.127)

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD No.69)

A RAMALINGAM CONTRACTOR (BID ID -1412893)