Development of Tourism Infra at Markham Meghalaya.

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

FIRE ALARM (i) Automatic fire alarm system

sqm of PA

Providing soling with stone/best quality picked jhama brick,sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (b) Stone soling (i) 100mm thk

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6 coarse sand:12 graded stone aggregate 20 mm nominal size) up to plinth level with: (a) Cement mortar 1:6 (1 cement: 6 coarse sand)

Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) (b) 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m . With available excavated earth

Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details,supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs,spacers etc. complete. (Rates inclusive of all wastage,lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) (b) High Yield Strength Deformed bars or Tor Bars

Shuttering/ formwork: Foundation,footing,bases of columns,etc for mass concrete

Shuttering/ formwork: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel)

Shuttering/ formwork: Slabs, roofs, landings, balconies and access platform, shelves (using steel).

Shuttering/ formwork: Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel)

Shuttering/ formwork: Columns, Pillars, Piers, Abutments, Posts and struts (using steel).

Shuttering/ formwork: Stairs/ spiral staircase, (excluding landings) (using timber)

Shuttering/ formwork: Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

Shuttering/ formwork: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Providing and laying cement concrete 1:1½:3 corresponding to M20 (1-cement, 1½-sand and 3-stone aggregates of 20mm and down graded) including curing etc complete (excluding shuttering and reinforcement)

65 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1 :2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 15 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, complete

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level. (b) Cement mortar 1 :4 (1 cement: 4 coarse sand)

Fire Fighting

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought trained and fixed in position with hold fast lugs or with dash fasteners of required diameter & length. (c)With 1st class Local wood (i)Pooma/ Hollock/ Gamari/ and the like

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (b) 30 mm thick including lsl marked Stainless Steel butt hinges with necessary screws

Providing and fixing lSl marked M.S. pressed butt hinges bright finished with necessary screws etc.complete: (b) 100x58x1.9 mm

Smart lock (Rate Analysis Enclosed)

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete: (b)125 mm

Sliding door fittings (Rate Analysis Enclosed)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make contorming to ls:733 and ls:1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately): (a) For fixed portion (iii) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make contorming to ls:733 and ls:1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately): (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing Of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) (iii) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door. window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge: (e) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

15 mm cement plaster on the rough side of single or half brick wall of mix: (a) 1 :4 (1 cement: 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on surfaces: Water thinnable cement primer

Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (a) Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10

Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc.including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. (b) ln ordinary rock (soft rock/ medium rock/ hard shale)

Earth work in excavation by manual mechanical means Hydraulic excavator) over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge.

Berger Paints (Rate Analysis Enclosed)

Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first flcor level, excluding the cost of centerlng, shuttering, finishing and reinforcement. (b) M20 or 1 :1/2:3 (1 cement: 1/2 coarse sand: 3 graded stone aggregate 20 mm nominal size

Painting with best quality synthetic enamel paint etc to doors and windows

Providing ceramic Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed. (b) Premium range

Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level (b) Cement mortar 1 :4 (1 cement: 4 coarse sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (b)Painting wood work with delux multi surface Paint of required shade. Two or more coats applied @ 0.9. ltr/10sqm over an under coat of primer applied @ 0.75ltr/10sqm of approved brand and manufacture

Steel work welded in built up sect

ions/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) ln stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Glass railing (10mm)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (c)Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Applying priming coat: (a) with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) with ready mixed alluminium primer of approved brand and manufacture on resinous wood and plywood

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc„ complete. (b) Size of Tille 600x600 mm

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (A) BOULDER: CONSIDER TOTAL LEAD = 20 KM

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (c)Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Applying priming coat: (a) with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) with ready mixed alluminium primer of approved brand and manufacture on resinous wood and plywood

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc„ complete. (b) Size of Tille 600x600 mm

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (B) Ordinary Stone Aggregate: CONSIDER TOTAL LEAD = 20 KM

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (c)Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Applying priming coat: (a) with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) with ready mixed alluminium primer of approved brand and manufacture on resinous wood and plywood

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc„ complete. (b) Size of Tille 600x600 mm

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (C) Sand: CONSIDER TOTAL LEAD = 20 KM

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (c)Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing and fixing 1st quality ceramic glazed wall tiles conforming to lS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours and shades of any size as approved by Engineer-in-Charge,in walls, skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (a) Normal range

For 5-10 km (5km)=

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (D) Cement: CONSIDER TOTAL LEAD = 13 KM

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: (c)Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

For 10-20 km (10km) =

For 20-200 km (180km) =

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (E) Steel: CONSIDER TOTAL LEAD = 20 KM

Extra for carriage including loading and unloading and all charges complete beyond the initial lead of 5 Km. (F) BRICK: CONSIDER TOTAL LEAD = 20 KM

Brick: For 5-10 km (5km)=

Brick: For 10-20 km (10km)=

Providing soling with stone/best quality picked jhama brick,sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Stone soling 150mm thk

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including lSl marked M.S. pressed butt hinges bright finished of required size with necessary screws. (c) With 1st class Local wood (I) Pooma/ Hollock/ Gamariand the like) (ii) 30 mm thick

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (b) ln gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Externo Stark Puro Tiles (Rate Analysis Enclosed)

Vibrant Woven Vinyl flooring (Rate Analysis Enclosed)

Venitto sand (Polish) (800x300)mm (Rate Analysis Enclosed)

Marfig Pearl (Rate Analysis Enclosed)

Glide Marfig Taupe (Rate Analysis Enclosed)

Belvidere forest (1198x2398x9) mm (Rate Analysis Enclosed)

Venice Laguna (598x1198x8.5) mm (Rate Analysis Enclosed)

Leben Soffit Panels including frame (Rate Analysis Enclosed)

Providing, supplying,fitting,fixing and laying of dressed stone block walling and tile slab (Cherra/ local stone block) laid on 25mm thick base in cement mortar 1:3 and jointed with grey cement slurry including clearing, rubbing etc. complete as directed (d) Cherra stone block (300x150x20)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per lS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia.x50mm long with 6 mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, Shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia. x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: (b) 12.5 mm thick tapered edge gypsum moisture resistant board

Bamboo ceiling (Rate Analysis Enclosed)

Pare Soffit (Rate Analysis Enclosed)

Thatched Roof (Rate Analysis Enclosed)

Earthwork in excavation by Mechanical means up to a depth of 2m below the existing ground level for foundation, trenches of foundation, footings of column/walls, retaining walls, septic tank etc.including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. (a) All kinds of soil (ordinary soil/hard soil/dense soil)

Providing regular stone masonry in retaining walls etc. with coursed, hammer dressed or blunt chisel dressed stones of heavy section not less than 25x25x30 cm with proper key stone each not less than 25x25x75 cm long set in cement mortar 1 :6 (1 cement: 6 sand) including filling of trenches and providing of weep holes at 1.20 to 1.50 metres apart staggered.

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments,wing walls, returm walls with 100mm dia AC pipe extending through the full width of the structures with slope of 1(V) : 20(H) towards drawing face complete as per drawing and technical Specification Clasuses 614, 709, 1204.3.7

Granular sub base with well graded materials (Table 400.1) (A) By mix in place method :Construction of granular sub-base by providing well graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 40l . (ii)For grading II materials

Water Bound Macadam with crushable screenings 3)WBM grading-3(53mm - 22.4mm) Providing laying spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone scre

ening/ binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By manual means

Tack coat Penetration Grade Bitumen(80/100) (i)Providing and applying tack coat with penetration grade bitumen (S-90) using bitumen pressure distributor at the specified rate of 0.5 kg/sqm on the prepared WBM surface not primed, cleaned with hydraulic broom as per Technical Specification Clause 503(MORTH&H)

20 mm thick Open-Graded Premix Carpet using Bituminous Binder (penetration grade/modified bitumen) Providing laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case 1 : By manual means Without Anti-stripping Agent (I) Bitumen 80/100 grade

Seal Coat Type A Providing and laying seal coat sealing the voids in a bituminous surface laid to the spedified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. A. By Manual means Case I: Type A Without Anti-Stripping Agent (I)Bitumen 80/100 grade

Loading and unloading of lime, aggregates, stone, boulder, brick aggregates, kankar, building rubbish, crushed slag, stone for masonry work etc. by manual means etc. (i) + (iii) Loading and Unloading of Stones aggregate etc.

Loading and unloading of lime, aggregates, stone, boulder, brick aggregates, kankar, building rubbish, crushed slag, stone for masonry work etc. by manual means etc. (ii) + (iv)Loading and Unloading of Blindage

Loading and unloading of bitumens Drums by manual means (i) Loading of Bitumen drums by manual means including a lead upto 30m.

Haulage excluding loading and unloading cost Case 1- Surfaced Road(average load both sand and stones)

(a)Stone aggregate/ chips-

For 20-200 km (180km) =

(b) Blindage -

(c) Bitumen - Quarry from Mawiong(P.W.D :Stone yard)

15 mm cement plaster on rough side Of single or half brick wall finished with a floating coat Of neat cement Of mix: (b)1 :4 (1 cement: 4 fine sand)

Cement concrete floor topping 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate) finished with a tloating coat Of neat cement, including cement slurry, complete.(b) 20 mm thick

Making soak pit 2.5 in diameter 3,0 metre deep with 45x45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diamcter,1.8 in long complete as per standard design

Earthwork in excavation by manual/ mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5 in in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead up to 50 in and lift up to 1.5 in, as directed by Engineer-in-charge. (b) In ordinary rock

Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code forR.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports,chairs, spacers etc. complete.(Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required) (c)Thermo-Mechanically Treated bars

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineerin-charge.(a)All works up to plinth level

Extra for providing richer mixes. (a) Providing M-30 grade concrete

For 10-20 km (10km) =

15mm cement plaster on rough side of single or half brick wall finished with floating coat of neat cement of mix: (a) 1:3 (1 cement: 3 find sand)

For 20-27 km (7km) & For 20-200 km (180km) =

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in Charge and consisting of : (i) 1St layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1cement: 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 0.008 cum/sqm thoroughly embedded in the 2nd layer.

Random rubble masonry with hard stone in superstructure above plinth level and up to tirst floor level, including levemng up with cement concrete 1 :6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at window sill, ceiling level and the like.

Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing w

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: (a) 250x10 mm

ith bolts and nuts or welding, if necessary as directed.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and comers, all necessary fittings complete,including applying a priming coat of approved steel primer.

With ready mixed red oxide zinc chromate primer Of approved brand and manufacture on steel galvanised iron/ steel works

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts,nuts and washers, etc., including making necessary connections with rain water pipes complete

Providing ridges or hips Of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.

Half brick masonry with common burnt clay (non modular) 1st class bricks in foundations and in plinth:

Providing precast cement concrete Jali 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 6 mm nominal size ),reinforced with 1.6 mm dia. mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete,excluding plastering of the jambs, sills and soffits

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: (b)M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete with sand cast iron S&S as per IS:1729/IS: 3989 (a) 100x100x100mm

Supplying fitting and fixing complete single phase open well submersible pumps sets or similar. 3 HP

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings with one step cpvc solvent cement,trenching,refilling and testing of joints complete

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. (a)All kinds of soil (ordinary soil/ hard soil/ dense soil)

Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level . (a) Cement mortar 1:3 (1 cement: 3 Coarse sand)

Providing corrugated G.S or galvanised iron sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat Of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved sur

faces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (c) 0.63 mm thick with zinc coating not less than 275 gin/sqm

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements tor inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to lS:4454-part 1 and M.S. top cover of required thickness tor rolling shutters. (a) 80x1.25 mm M.S. laths with 1.25 mm thick top cover

12mm thk cement plaster in single coat on rough side of single or half brick wall for columns

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc„ including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch Of corrugation as approved by Engineer-in-charge) 0.50 mm(+O.05 a/o) total coated thickness with zinc coating 120 grams per sqm as per ls:277, in 240Mpa steel grade, 5-7 microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns. Sheet should have protective guard film Of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 mcter or as desired by Engineer-incharge. The sheet shall be fixed using selfrdrilling/ selftapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontav vertical or ciirved surfaces, excluding the cost of purlins. rafters and trusses and including cutting to size and shape wherever required.

itemH1Code149

Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns using self-drilling/ selftapping screws complete: (a) Ridge plain (500-600mm)

Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns using self-drilling/ selftapping screws complete: (f) Gutter: Roof

Providing wood work in frames Of doors, windows, clerestory windows and other frames, wrought trained and fixed in position with hold fast lugs or with dash fasteners of required diameter & length.

Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first flcor level, excluding the cost of centerlng, shuttering, finishing and reinforcement. (b) M20 or 1 :1/2:3 (1 cement: 1/2 coarse sand: 3 graded stone aggregate 20 mm nominal size

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1 St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing lsl marked M.S. pressed butt hinges bright finished with necessary screws etc. complete: (a) 125x65x2.12 mm

itemH1Code148

itemH1Code147

itemH1Code146

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Wash basin for Gents Public Toilet JDS-BLM-25907N Thin Rim Table top Basin.530 x 420 x 140mm ALD-727L130 Click Clack Waste coupling 32mm size Full Thread with130mm height ALD-769L300X190 Bottle trap 32mm Size with 300mm & 190mm long wall connection pipes & wall flange.

FLP-5191PM 3-Hole Basin Mixer with Popup Waste System

FLP-5021PM Pillar Cock with Extension Body

FLP-5053PM Angular Stop Cock with Wall Flange

FLP-5037PM Bib Cock with Wall Flange

AKP-35795 Swivel Mirror 630 x 445mm Rectangular Shape

ACN-1137N Soap dispenser with Metallic bottle

Soap Dispenser - Automatic SDR-BLC-DJ0160AS

Hand Dryer- Flash HDR-SSF-AK2807 Flash touch-free inframed hand dryer with 1150W rated power 7 carbon brush motor.

AKP-35711PS Single Towel Rail 600mm Long, Stainless Steel

AKP-35721P Towel Ring Square

AHS-1553 Paper Holder with Flap Recessed Type (Stainless Steel)

Water closet for S type SLS-WHT-6953BIUFSM Rimless, Blind Installation Wall Hung WC With UF Soft Close Slim Seat Cover, Hinges And Accessories Set,Size: 375x520x400 mm JCS-WHT-2431S Single Piece Concealed Cistern Body (Front or Top Actuation) with Installation Kit & “S-Type”drain pipe connection set forWall Hung WC (without FlushControl Plate) JCP-CHR-152415 Control Plate Opal

Water closet for P type SLS-WHT-6953BIUFSM Rimless, Blind Installation Wall Hung WC With UF Soft Close Slim Seat Cover, Hinges And Accessories Set,Size: 375x520x400 mm JCS-WHT-2431P Single Piece Concealed Cistern Body (Front or Top Actuation) with Installation Kit & “P-Type”drain pipe connection set for Wall Hung WC (without Flush Control Plate) JCP-CHR-152415 Control Plate Opal

ALD-577 Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer)

URS-WHT-13255 Urinals without sensor with fixing Accessories Size: 480 x 300 x 740 mm SNR-51097 Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) Model no: 1810-UC/1110UC, JSE-CHR-110UC450OX Curved shaped urinals partition with frosted glass 10mm , Chrome finish.

SHP-BLK-ST86112 Shower panels GLASSY-BLACK 1400x 250mm

Shower drain channel-Tile insert-SquareItem code: 16-0205-05 (102 x 102)mm

Shower drain channel-Tile insert Item code: 16-0203-16 (450 x 125 x 30)mm

Rohe (13-0124-03) Single bowl (Sand choco)

ERD-WHT-VO25 ERICA VERTICAL (Digital) 25Litres

WAC-SAP-BR0600CS Grab bar 692mm Long, Satin

WAC-SAP-BG0800CS Grab bar Vertical Swing, Satin

WAC-SAP-BAI090CS Grab bar Left 90° Angle,Satin

DIS-WHT-93801 Wall Hung Basin with Fixing Accessories, Size :650x565x155 mm

DIS-WHT-93753P180UF Rimless Bowl For Coupled WC with UF Soft Close Seat Cover, Hinges, Fixing Accessories, Size:390x610x800mm P-Trap- 180 mm DIS-WHT-93201 Cistern With Dual Flush Cistern Fitting

Providing and fixing Multi floor trap @320/ per piece inclusive of GST @18% for 4'' in Bathroom and Toilets, complete and as directed.

KRISTALL TREND,BKT-CHR-31651200X : Corner entry shower enclosure with door sliding to both sides - 4 parts Glass: 6mm Finish: Chrome (H: 1850 W: 1200 X 1200)mm ESA-GBL-LDG1212 Artificial Marble Ledge 1200 x 1200mm

Double Bowl Exclusive Size: 1139 x 498 x 245mm (Black) 13-0312-02

Arched metal frame Mirror CORSICA DESIGNS

JBT-WHT-FSBTMAD1778: Free Standing Bathtub with Chrome Over Flow, Waste & Legs Queens 1702 X 787 X 434/615 mm KUBIX PRIME Floor Mounted Single Lever Bath Mixer KUP-35121KPM Exposed Parts of Floor Mounted Single Lever Bath Mixer with Provision for Hand Shower, without Hand Shower & Shower Hose (Compatible with ALD-121) ALD-121 Concealed Body for Floor Mounted Single Lever Bath Mixer

PVC pipe for Soil pipe, Waste pipe and Urinals Pipe (i) 110mm dia. (Soil pipe)

PVC pipe for Soil pipe, Waste pipe and Urinals Pipe (ii) 75mm dia (Waste pipe)

PVC pipe for Soil pipe, Waste pipe and Urinals Pipe (iii) 50 mm dia (Waste pipe)

90 Degree PVC bend (i) 110mm dia

90 Degree PVC bend (ii) 75 mm dia.

90 Degree PVC bend (iii) 50 mm dia.

90 Degree PVC bend with Doors (i) 110mm dia

90 Degree PVC bend with Doors (ii) 75 mm dia

45 Degree PVC bend (i) 110mm dia

45 Degree PVC bend (ii) 75 mm dia.

45 Degree PVC bend (iii) 50 mm dia.

PVC single ‘Y’ (i) 110mm dia

PVC single ‘Y’ (ii) 75 mm dia.

PVC single ‘Y’ (iii) 50 mm dia.

PVC coupler (i) 110mm dia

PVC coupler (ii) 75 mm dia.

PVC cleaning pipe (i) 110mm dia

PVC cleaning pipe (ii) 75 mm dia.

PVC cowl (i) 110 mm dia PVC cowl

PVC cowl (ii) 75 mm dia PVC cowl

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Change. 32mm nominal dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25mm nominal dia pipes

Providing and fixing Chlorinated PolyvinylChloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes & fittings, with one step CPVC solvent cement, trenchi

ng, refilling & testing of joints complete as per direction of Engineer in charge

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ls:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 litre capacity @ Rs.10/Ltrs

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ls:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 5000 litre capacity @ Rs.10/Ltrs

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solventcement,trenching, refilling & testing of joints complete as per direction of Engineer in Change. (vi) 50 mm nominal outer diameter pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solventcement,trenching, refilling & testing of joints complete as per direction of Engineer in Change. (v) 40 mm nominal outer diameter pipes

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Concealed wiring in looping system with 2x1.5 mm² PVC insulated single core cable of 600V grade in heavyguage PVC pipe including occuping and fitting of elbows, bends, fees, junction box etc. including requird size of MS Conceal boxes and front plate for housing of switches socketsfan regulator bell push etc complete to light point.

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

(c) Short Point upto 3 mtr

Wiring as in item no.20 above to light plug point when fixed elsewhere with continous earth wire complete.

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

(c) Short Point upto 3 mtr

Wiring as in item No.1 complete to a light plug point when fixed on the same board.

Wiring as in item No.20 above to a Power Plug Point with 2x4 mm² including supplying and fitting of 15 Amp modular switch socket combined with continous earth wire to a Power Plug Point Complete

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

(c) Short Point upto 3 mtr

Wiring as in item No.20 above to a ceiling Fan/Exhaust Fan point.

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

(c) Short Point upto 3 mtr

Wiring as in item No.20 above to calling Bell/Bell Indicator point.

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

Wiring as in item No.20 above for Staircase/ 2 Way Switch wiring.

(a) Long Point upto 10 mtr

(b) Medium Point upto 6 mtr

Drawing of Main and Sub-Main Line wiring as inn item No.20 above with VIR or PVC Single Core 250V Grade Cable.

(a) With 2x2.5 mm² copper wire

(b) With 2x4 mm² copper wire

Drawing 3 phase Main Line 4 wire with DGSD approved VIR or PVC cable 660 V grade in Heavy Guage 16 SWG Regid pipe Including with all necessary accessories.

(c) With 4x6 mm² copper wire

(d) With 4x10 mm² copper wire

Supplying, fitting & fixing complete 240/415 V Al. Bus-Bar chamber. (A) Economy Sheet Steel 50Hz. 240/415 V. (ii) TPN 4 Ways. (c) 100 Amp 415 V Capacity.

Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC application till 63 A. (A) Single Pole 240/410 V

Supplying, fitting & fixing of DX3 Isolators for AC applications upto 125 A.

A. Double Pole 240 V (b) 40 Amp

C. Four Pole 415 V (b) 40 Amp

Supplying, fitting and fixing of Moulded Case Circuit Breaker (MCCB's) of the following Amp capacity. (B) With breaking capcity of 20 kA (iii) Four Poles (b) 80-100 Amp

Supplying, fitting & fixing if Distribution Board SPN DB's for MCB, Isolator, RCCB and RCBO. (B) IP 43-#1K 09 with metal door (c) 12 way + 12 Module

Supplying, fitting & fixing if Distribution Board ETPN DB's for MCB, Isolator, RCCB and RCBO. (B) IP 43-#1K 09 with metal door

(b) 6 way 8+18 Module

(c) 8 way 8+24 Module

Supplying, fitting and fixing of LED Batten surface or wall mounted with all necessary accssories. (b) With Aluminium housing & integrated electronic driver. (ii) 18 w (1182x23x37) mm

Supplying, fitting and fixing of LED RETROFIT LAMPS surface or wall mounted with all necessary accessories. (a) Regal batten for LED Tube (Universal batten for T5 and T8 lamps) (i) 8 upto 1x22 W

Supplying, fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories. (a) 2x2 (595x595x65) mm LED luminarie.

Supplying, fitting and fixing of LED DOWNLIGHTS surface or wall mounted with all necessary accessories. (b) Recess mounted pressure die-cast aluminium luminaire in powder coated whited finish with drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver. (i) 5 W ceiling cutout:ø 155 mm, height: 45 mm

Supplying, fitting and fixing of LED MIRROR LIGHT surface or wall mounted with all necessary. Supply, Installation, Testing & Commissioning of 1x9 watt LED Mirror light fixture wall mounted with electronic high efficiency electronic driver as complete as required. (Phillips Make, Cat No-31083 shell or equivalent) (a) LED Mirror Lights.

Supplying, fitting and fixing of FLOOD LIGHT surface or wall mounted with all necessary accessories. (a) Flood light suitable for highlighting architectural features or area lighting, also suitable to rough service/installations (i) 30 w

Supplying, fitting and fixing of LANDSCAPE LIGHTS surface or wall mounted with all necessary accessories.

(b) Family of post top lantern designed to complement the geometry of the area (design from the renaissance era yet with a modern look using new generation technology in LED). (ii) 50 W suitable for pole dia ø 76 mm

(f) Decorative UP-down luminaire with wall surface mounting using COB LED as light source. (i) 15 w

(h) Aesthetically designed die-cast aluminium landscape luminaire for downward lighting with high power LED as light source. (i) 16 w (for Bollards)

Supplying, fitting, connecting, testing and commissioning of calling Bell/Bell Indicator type suitable for 230 V as well as battery operated complete with all necessary accessories. (a) Dingdong Bell

Supplying, fitting & fixing of exhaust fan double self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other petty accessories as required. (a) Domestic Exhaust Fans (i) 150 mm

Providing, laying, connection, testing & commissioning of the following sizes of 1100 V PVC/XLPE Armoured Cables with Alluminium conductor as per ISI code in bracket, trenches sand cushioning with laying etc and refilling the same in layers or by supporting them in walls and all other accessories as required.

(a) With 3.5 core 25 mm² .

(d) With 3.5 core 70 mm² .

Supplying, fitting and fixing of Copper lightning Arrester with 5 nos. Finger at the top & copper base plate at the bottom. (b) with 5ft high copper rod.

Supplying, fitting & fixing earthing with copper earth plate 600x600x6 mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salt etc complete as required. (a) Copper earth plate electrode.

Supplying, fixinf connection testing of 8SWG wire along the wall, columns,etc with necessary clamping as required. (a) with copper wire.

Supplying and laying of 15 mm x 5 mm GI/Copper Strip at 0.50 mtrs, below ground. (a) with 25 mm x 5 copper strip.

Supplying, fitting and fixing of 440 Volt grade Four pole change over Main Switch (Best Quality). 100 Amp capcity.

Supplying, fitting, fixing, connection and testing of 30 W High Mast Tower Lighting (12 M) complete with all necessary accessories.

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening/ railing with M.S. flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws (b) Fixed to openings/ wooden frames with rawl plugs screws etc.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, including scaffolding:

Providing and fixing ball bearing for rolling shutter

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 mm (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (a) With G.I barbed wire

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm includjng strengthening with 2 mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (a)

Made of G.I. wire ofdia. 4 mm

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia. etc. complete.

Providing and fixing bright finished brass door latch with necessary screws etc. complete:(b) 250xl6x5

Earthwork in Excavation Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (I). By Manual means. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Oil grease trap

Doctor’s visit to Construction Camp every fortnight for checking of basic health of the workers.

Bio Toilets in Construction Camp Supply of D.R.D.O Technology Bio-Digester tanks Rota molded double wall manufactured in automatic Rota molding machines using superior grade Virgin LLDPE (Polymer) with 2.5% Carbon Black, UV Resistant Polymer leading to highest quality consistency. Thickness of the outer shell of minimum 6mm, partitions made from HDPE Polymer of 8mm thick. Immobilization Matrices of Heavy Duty Poly Grass PVC Matting lining along the partitions on both sides. Heavy duty pipes & fitting shall be used in these tanks of Finolex or equivalent make. Fasteners made of Brass shall be used inside the tank with manufacturer’s test certificate and including AMI (Bacteria) of 600 liters per tank. Size of Tank: 2000 Litres capacity upto 20-30 users per day; Tank Diameter of 1425mm; Tank Height of 1600mm; Outlet pipe diameter 75mm; inlet pipe diameter 110mm.

FRP Toilet Cabin IWC (Ceramic Pan) type of size 1250mm X 915mm X 2400mm with ± 5% tolerance.

Installation Charges (i) Plumber (Skilled)

Installation Charges (ii) Plumber (Unskilled)

TOILET CUBICLES

URINAL PARTITION Size of Urinal - 400mm(W) X 900mm(H) "RESTLOO" Urinal Partitions. Specification: Shape - A or B Colour: As Per Colour Shade Overall Hight: 900mm Overall Width: 400mm Fittings: Urinal Clamp SS 304 Fixings: All in SS 304 Screws

Transportation Charges

Packaging Charges

BOREWELL

DRILL QUOTE

Drilling of Bore Well via DTH method. 8 inch

MS Casing tata 8inch

Well Cover

Transportation

Labour inclusive casing installation etc.

PUMP SET

Motor Submersible 3HP approx

Submersible Cable

Steel Wire Rope

MS Clam Double

U Clams

Adapter

itemH2Code19

Miscellaneous

itemH2Code21

itemH2Code22

itemH3

BoQ_Ver4.0

FIRE FIGHTING (i) Downcomer system

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Tree Planting Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (I) Shade Tree. (A) (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar (A) Silver Oak

Tree Planting Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (I) Shade Tree. (A) (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar Pine trees

Shrub Planting Supplying and planting of ornamental shrub ( below 1'- 0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . Korobi/ Azalea

Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cowdung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) With English Ivy (iii) Using earthen pot of 60 cm dia.

Landscaping

Air Quality Monitoring

Water Quality Monitoring

Noise Monitoring