PROVN OF SDS, IAG ROOM, ADDN/ ALTN TO TOILET OF BLDG NO P1 ALONGWITH

Amount

Demolition of brickwork built in Cement mortar or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete unreinforced in any description in any position not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out to MOD land complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including scaffolding for first and second floor level complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for reinforced cement concrete type M-30 or 1:1.5:3 (using 20 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves for first and second floor levels and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

All as per item no. 10.00 above but 6mm to 8 mm dia

M&L for Mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete for first and second floor levels complete all as specified and directed.

M&L for 5mm thick rendering on ceiling surfaces in Cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair or other than fair faces of brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new or untreated plastered wall surfaces and applying two coats of oil bound distemper over 1.5mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair/unfair faces of brickwork or concrete surfaces finishing even and smooth without using extra cement mixed with WPC liquid @ 200 ml per bag of cement on walls. (WPC shall be measured and Paid separately) complete all as specified and directed.

Supply only water proofing compound liquid complete all as specified and directed.

S&F 1st class teak wood, hard wood, plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 1st class teak wood, hard wood, 35mm thick panelled shutters plain, framed, panelled shutters ( any number of panels) with panels of timber feather edged teak wood planks supplied and fitted to chowkats complete all as specified and directed.

S&F Ist class teak wood, hard wood, 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-1 section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63 mm double rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed. Make : Echon/Rajshree or equivalent from approved list of makes of CEWC and as approved by GE.

S&F 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter shall not be less than 600Kg/Cum, 100% lead free door complete all as specified and directed. Make : Echon/Rajshree or equivalent from approved list of makes of CEWC and as approved by GE.

S&F 4.80 mm thick sheet glass, ordinary quality in square or rectangular not exc 0.50 Sqm in each pane with solar control film 25 micron reflective type sticked to glass panels as per instructions of manufacturers complete all as specified and directed.

S&F framed work such as Grills, grating etc with ends of bars shouldered and or riveted or forged into spiles framed guard bars barred iron doors ladders framed balusters walk ways railings etc confirming to Fe 290, Gde E-165 complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for Band straps, hooks, pintle hinges, large hasp and staples, chains hand made sliding bolts clamp, hold fasts, any type of angles, wall ties etc complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth, not otherwise decribed and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F 100 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as specified and directed.

S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Brass butt hinges 100 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Brass handles 150 mm long, handles, cast type, polished bright with brass screws complete all as specified and directed.

S&F Brass handles 100 mm long, cast type, polished bright with brass screws complete all as specified and directed.

S&F Brass wire, type-I, gate and shutter hooks and eyes 125 mm long complete all as specified and directed.

S&F in repair Brass Door stopper tongued with hard drawn steel spring 140 mm long cover plate complete all as specified and directed.

S&F in repair Door closer hydraulically regulated designation No 1 universal type, aluminum (extruded section) body, suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

S&F Designed Decorative Gypsum boards false ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having curled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to centre including providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mmx12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self-drilling and tapping screws having Philips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish formulated jointing compound and 48mm wide fiber tape to provide seamless finish including preparation of newly surfaces of ceiling and applying two coats of oil bound distemper over 1.5mm thick wall care putty complete all as specified and directed.

M&L for second class hard wood in scantlings, clean sawn timber framed and fixed work complete all as specified and directed.

S&F for 12 mm thick (7 no. of ply) plywood grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F 6 mm thick (5 no. of ply) Veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers; fixed with screws to timber frame work complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old untreated surfaces works with two or more coats till the surface smooth complete all as specified and directed.

M&L for 100 mm cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 100 mm cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick as in backing coat of tiles on fair faces of brickwork or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for Vitrified double charged, dark shade tiles 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make Johnson/Orient bell/somany or equivalent from approved list of makes of CEWC and as approved by GE.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

(a) M&L for cleaning the surface, remove dust, dirt, loose particles and unsound concrete / cement portion, making grooves in continuous crack portions, filling grooves with CM 1:1 with approved WPC and providing 20 mm thick cement mortar (1:3) mixed with Dr Fixit tonic liquid (or equivalent from approved list of makes of CEWC and as approved by GE.) 200 gram/bag. (b) Applying evenly a tack coat of bituminous primer @0.4 ltr /Sqm. (c ) S&F APP polymeric water proofing membrane 3mm thick and weight not less than 3.5 kg/sqm, black finish, reinforced with non-woven polyester matt at core (weighing not less than 160 gms/ sqm) with a thermo finish polyethylene sheet on both sides, laid by torching application with a butane gas torch with an overlap of 100 mm at the sides and 150mm at the ends as per manufacturer's instructions. (d) M&L for providing hydraulically pressed PCC tiles of size 250X250mm X 20 - 22 mm thick with grey cement machine made laid over and including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound and gap between tiles not exceeding 8 mm, grouted with full thickness of tiles with cement mortar 1:3 mixed with water proofing compound complete all as specified and directed. Make: STP Ltd / IWL or equivalent from approved list of makes of CEWC and as approved by GE. (Rates for WPC included in this item)

M&L for providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specified and directed.

M&L for rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F1000 litres capacity Rotational moulded polyethylene water storage tanks triple layers (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each), fittings complete all as specified and directed.

S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in Cement mortar 1:6 as in floor complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick, laid over and including 10 mm thick rendering 1:4 CM, set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed.

S&F18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws and SS cleats as in modular kitchen cabinets/cupboards cutting and making required size and shape at site including lipping portion match with laminated colour complete all as specified and directed.

S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F 30mm width of flaps( when open) continuous (piano) hinges, 30mm width of flaps (when open), brass, bright finish or electrogalvanised complete all as specified and directed.

S&F magnetic catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/sq.cm laid in trenches or wall complete all as specified and directed

S&F GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 15mm bore complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 20mm bore complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valve with iron wheel head screwed both ends to GI pipe fixed in repairs complete all as specified and directed.

S&F single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795mm Make: jaquar Cat No. KUSWHT-35851SN or equivalent from approved list of makes of CEWC and as approved by GE.

S&F wash hand basin table top type fixed on granite top grooving and cutting if required complete all as specified and directed Make: Jaquar cat No SLS WHT-6601 or equivalent from approved list of makes of CEWC and as approved by GE.

S&F pillar tap single lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixing with washers complete all as specified and directed. Make Jaquar Cat No. ARI 39005B or equivalent from approved list of makes of CEWC and as approved by GE.

S&F hand shower ( health faucet ) CP with 8 mm dia, 1.2 Metre long flexible tube and wall hook complete all a specified and directed. (Make : Jaquar Cat No. ALD-573 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F chromium plated paper holder fixed on walls complete all as specified and directed. (Make: Jaquar Cat No: AKP-CHR-35753P or equivalent from approved list of makes of CEWC and as approved by GE.).

S&F angle valve (one way) 15 mm bore cast copper alloy fancy type, chromium plated with cup complete all a specified and directed. (Make: Jaquar Cat No: ARI-39053 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed (Make: Jaquar Cat No: ARI-39037 or equivalent from approved list of makes of CEWC and as approved by GE.).

S&F glass shelf corner fixed on walls with screws complete all as specified and directed (Make: Jaquar Cat No: ACN-1173 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F towel rack chromium plated brass fixed to walls with screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35781PS or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed (Make: Jaquar Cat No: AQN-7721 or equivalent from approved list of makes of CEWC and as approved by GE.).

S&F Soap dish fixed with and incl CP brass screws complete all as specified and directed (Make: Jaquar Cat No: AKN-35731P or equivalent from approved list of makes of CEWC and as approved by GE.).

S&F Soap dispenser fixed with and incl CP brass screws complete all as specified and directed (Make: Jaquar (Kubix) Cat No: AKP-35735P or equivalent from approved list of makes of CEWC and as approved by GE.).

S&F chromium plated brass 32 mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. (Make: Jaquar Cat No. ALD-725 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F 32 mm bore brass chromium plated bottle traps for wash basins, sinks, urinals etc with inlet and outlet screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed.

S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. (Make: Jaquar Cat No. ALD-8058 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F grating doom 125mm dia with waste hole complete all as specified and directed.

S&F PVC SWR 75 mm bore pipes 6 Kg/sqcm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC SWR 75 mm bore pipes 6 Kg/sqcm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC SWR 110 mm bore pipes 6 Kg/sqcm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC SWR 110 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC SWR bends 75 mm bore any radius complete all as specified and directed.

S&F PVC SWR bends 110 mm bore any radius complete all as specified and directed.

S&F PVC SWR vent cowl 110 mm bore complete all as specified and directed.

Demolition and breaking up or drain pipes of any description (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for reinforced cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for GI powder coated micro perforated micro look false ceiling with fleece lay-in-type, 0.50mm thick, suitable for grid/frame module of 600mm x 600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastener wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm celling etc complete all as per specified and directed (Make: Armstrong/Hunterduglas or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F 10 to 12 mm thick endura tiles area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed

M&L for preparation of new or old plastered wall surfaces and applying 1.5 mm thick wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resistant primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivalent as approved) of approved colour complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, hinges type B-21 100mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed.

Supply only 5.0mm thick heat absorbing glass any size complete all as specified and directed.

Supply only 5.0mm thick prelam PVC sheet for fixing in aluminium doors/ windows complete all as specified and directed.

S&F (in repairs) GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 15mm bore complete all as specified and directed.

S&F (in repairs) GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 25mm bore complete all as specified and directed.

S&F (in repairs) 25 mm bore gun metal, globe or gate valve with iron leaver head screwed both ends for iron pipe complete all as specified and directed.

Dismantling water tanks Exc 500 & not exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F Urinal in size of 355x340x535mm fixed to wall incl CP brass coupling and waste pipe and screws complete all a specified and directed (Make: Jaquar Cat No: URS-WHT-13261 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F urinal auto closing concealed urinal flush valve with wall flange fixed to GI pipes and complete all as specified and directed (Make: Jaquar Cat No: PRS-077 or equivalent from approved list of makes of CEWC and as approved by GE.)

S&F urinal spreader CP Brass fixed to urinal and other end fixed to auto closing system complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS:1161-1729 grade st. - 240 complete all as specified and directed.

S & F Mild steel work in framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting, etc n exc 10 kg each brackets and similar work conforming to Fe-290. Gde -E-165 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches and getting out soft loose soil not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc for shaft wells cesspits, manholes, etc n exc 10 sq m on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F 200 mm dia PVC SWR pipes working pressure 4 kg/cm2 in any fittings bent, sockets etc laid under floor complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching, coping complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 (using 12.5 mm graded stone aggregate) as in cover slabs complete al las specified and directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil etc complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for Makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 20 mm thick cement mortar 1:4complete all as specified and directed.

S&F chequered cement concrete tiles glossy finished 300x300x22 mm thick set, jointed and polished in neat cement slurry in floors with cement and pigments complete all as specified and directed.

Cutting of existing grass with mud and relay after laying of pipe line complete all as specified and directed

S&F 0.60x0.60 green synthetic matt/PVC matt for laying on chamber complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed

M&L for submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and including medium grade rigid non-metallic PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and duly connected to common earth dolly all as specified. Make:-RR/Havells/Polycab

Disconnecting mains connection and taking out old submain wiring with 3 runs FRLS PVC insulated unseathed stranded copper conductor of size 4 Sqmm cable from the concealed conduit wall orand making good to disturbed surface complete all as specified and directed.

S&F Modular MCB Protected Socket PVC Plastic Base Model complete with MCB SP 25 Amp, 230 volts complete all as specified. Make: Legrand/Havells/Indoasian Cat No-DHDMCS N0251025

Supply and fix in replacement energy efficient ceiling fan (Dubai white) economy range high speed having Electronically driven BRUSH LESS DIRECT CURRENT MOTER & Ribbed aluminium blades for higher air delivery, power coating provides longer life complete with accessories 230 volts 1200 mm sweep,320 RPM with air delivery 220 Cum/min including making arrangement to hanging of fan to ceiling with proper hook nut bolts all as specified & directed.

M&L of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requirement for the following Note:if Cutting & chashing required shall be measured/paid under relevant items. Make-RR,,Polycab/Havells.

One light/ceiling fan point controlled by one way switch 5 amps.

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

Taking down old point wiring with copper/aluminium conductor ( light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants holders, regulators, sockets, Light fitting, socket point etc. making good disturbed surfaces of walls, floors complete all as specified and directed.

M&L point wiring with PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 2.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC conduit of suitable sizes of medium grade ISI marked for surface wiring and its accessories, including MS sunken box and hylem sheet of suitable size, ISI marked for housing the switches and sockets, Make-RR,Polycab,Havells

S&F submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed. Make : RR Kable/Havells/Finolex Note for item No 132.00 to 134.00 : 2 run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame. all as specified. Make : Anchor/Roma/Cona

S&F modular switch 16 A one way 240 volts all as specified.Make : Anchor/Roma/Cona

S&F modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts all as specified.Make : Anchor/Roma/Cona

S&F of modular socket outlet 16 A-2/3 pin combined 240 volts all as specified.Make : Anchor/Roma/Cona

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body all as specified and directed by Engr - in - Charge all as specified. Make : Anchor/Roma/Cona

S&F in electronic fan regulator modular type 120Watt step type Double Modular as per existing all as specified. Make : Anchor/Roma/Cona

S&F sheet metal enclosures for DB's when MCB to be used, SPN single door 240 volt, 8 way with 200 amps rated bus bar. all as specified.Make : Legrand/Standard/Indo Asian/HPL

S&F of MCB SPN 63 Amp 240 volt 10 KA all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F LED light fittings 36 w (2x2ft), 230v recessed mounting 600x600mm complete suitable for false ceilling complete with all accessories pre-wired and including connecting up with twin core wisted flexible copper conductor cable with existing suitable size complete all as spd and directed MAKE : CG/PHILIPS/HAVELLS

145 M & L earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to galvanised iron (GI wire 4mm) as earthing lead lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 5 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth strip 7.5m will be measured and paid separately)

M & L earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 25x4mm galvanised iron strip/wire complete all as specified and directed.

S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks size 20 mm complete all as specified and directed

S & F Data + Numeric Telephone Socket outlet complete all as specified and directed.

S & F Engagement light LED type with red and green compartment 230 volts with LED lamp 9 watt complte all as specified and directed.Make CG/Havells/Philips.

S&F Single pole and neutral sheet metal enclosure powder coated with a two pin and earth plug and socket complete with one single pole MCB 32 Amps Cat part no-4086 17. Make: Legrand/HPL/C&S.

S & F in replacement exhaust Fan 300 mm sweep 220 Volts propeller complete all as specified and directed. Make-Caryaire cat part no-CP4F15D300 or euivalant havells,phillips

S & F LED Mirror light of 3.6 Watt 230 Volts crome colour complete with E14 lamp base & all accessories internally prewired including connecting up with three core shethed flexible copper conductor cable of suitable size complete all as specified and directed.Make-Philips cat part no-34034/14/86or equvalent in CG/havells.

S&F in replacement surface mounted (2'X2') slim LED light fitting 34 / 36 Watt complete for ceiling mounting, energy saving ,powder coated panel 230 Volt 50 Hz.Make- Havells of Cat No-LHEWDRP7PK1W034 and Make of CG Cat No- LCTLRN-36CDL or equivalent Philips.

Taking down chiller,connecting lines and refixing with iron stand with new and making good disturbed surfaces of walls etc.

S & F Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

S & F M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of 100 mm dia including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed.

S & F M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of 125mm dia including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed.

M & L for Insulation of M S Pipe with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of 100 mm dia including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed.

M & L for Insulation of M S Pipe with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of 125 mm dia including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size complete all as specified and directed.

BEHAL TRADERS

B Kumar and Co