Construction of Manhole and Kitchen Chimney Bed arrangements at Thamukkam Convention Centre in Ward No 31 Zone - II Madurai Corporation

Amount

Construction of manholes using sulphate resistant cement at various depths to invert including earthwork excavation as per SS 20B, laying cement concrete in C.M. 1:3:6 using 40mm B.G.jelly for foundation, sinking well kerb below G.L. for 4.5m depth and above, pumping, timbering charges for 2.5m depth and above, stock brick work in C.M. 1:3, for 23cm thick wall and over 23cm thick wall, plastering interior with C.M. 1:3, 20mm thick and exterior with C.M. 1:3, 12mm thick, laying plain cement concrete 1:3:6 using 12.0mm to 20mm B.G.jelly fixing the frame, providing C.I. steps, manhole cover and frame, benching and channelling including refilling the trench with excavated earth and disposal of surplus earth etc. complete for the following sizes for each manhole (As per the type design drawing for manholes). Depth 1.20m

Depth 1.15m

Depth 1.10m

Earth work excavation for foundation & depositing on bank with an initial lead of 10m & lift of 2 m for depths in soft disintegrated Rock when required, barricading with safety lamps etc all complete as per standard specification as directed by the Departmental Engineer.

Supply of PVC Pipe and Speicals Etc Complete Thamukkam Convention Centre 200mm Dia PVC Pipe 6KSC WD-M0017

200mm Dia PVC Pipe 6KSC WD-M0017

Waste Water Disposal Line - Kitchen to Manhole 110mm PVC Pipe (6KSC)

110mm PVC Elbow

110mm PVC Tee

110mm PVC Door Elbow

Diapharam Chamber Airvent Pipe 110mm PVC Pipe (6KSC)

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. WD-W0427

Refilling the trenches with suitable excavated earth available along the alignment after the pipes & specials are laid, jointed & tested in layers & watering, ramming & consolidation directed by the Engineer-in-Charge

Interconnection Works For Existing Main to New main Pipe line Etc Complete

Supplying, erecting shuttering with necessary supports for plinth beam with all cross bracing etc.,complete (RCC column footing plinth, beam and lintel sides ) etc Complete

Plain Cement Concrete 1:1.5:3 (one cement ,one and half fine aggregates and three coarse aggregates) using 20mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc.,complete as per standard specification

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high etc Complete

Suplying fabricating erecting of Ornamental grill work (for required Size 2.30 X 0.60cm) for compound top welded type using MSchannel angle flat and square bars etc., conforming to IS specification including primer coating and enamal painting as per design given by the departmental officers etc., complete as per STD Specification

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Supplying and laying in flooring with Polished Shahabad Stone Slabs 20mm thick with Machine Cut Edges of size below 2'0"x2'0" laid over base layer of cement mortar 1:2 (one cement and three sand)-20mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THERE AFTER Etc Complete

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Supply and Fixing for Cuddappah slab - 40mm thick including labour charges etc Complete

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supply and Fixing for Wall Mounting Fan including Labour Charges etc Complete (400mm Sweep)

Add GST 18%

M RAJA (BID ID -1363790)