Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.6 Cr
EMD Value
₹7.2 L
Closing Date
8 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Modification / repair works *Civil* in LCA hangar/s in HAL-Nashik factory areas
9835
NK/FW/C-1581A/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹7.2 L
8 Oct 2024
13 Sept 2024
13 Sept 2024
8 Oct 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT OVERHAUL DIVISION, NASIK WORKS AND SERVICES DEPARTMENT
Name of work: Modification / repair works (Civil) in LCA hangar/s in HAL-Nashik factory area.
Tender No.:NK/FW/C-1581A/2024-25
NIT NO. : NK/FW/535/2024-25
Estimate Value : Rs. 360.43 Lakhs
PRICE BID/ COMMERCIAL BID PART-B
Name of the Tenderer:
Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
Aluminium partition work
1 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead all complete and as directed by Engineer-in-charge. 6614.00 Sqm 47.75 Rupees Forty Seven and Seventy Five Paise Only 315846.53
2 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead all complete and as directed by Engineer-in-charge. 2490.00 Kgs 4.74 Rupees Four and Seventy Four Paise Only 11802.60
3 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead : Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) all complete and as directed by Engineer-in-charge. 5.00 cum 1261.49 Rupees One Thousand Two Hundred Sixty One and Forty Nine Paise Only 6307.45
4 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm all complete and as directed by Engineer-in-charge. 902.00 Sqm 65.23 Rupees Sixty Five and Twenty Three Paise Only 58837.46
5 Providing & Laying PCC 1:2:4 at any size of Position above or below ground (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) all complete and as directed by Engineer-in-charge. 5.00 Cum 6609.93 Rupees Six Thousand Six Hundred Nine and Ninety Three Paise Only 33049.65
6 Providing,fabricating, hoisting & errecting in position Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and as directed by Engineer-in-charge. 29775.00 Kgs 98.45 Rupees Ninety Eight and Forty Five Paise Only 2931348.75
7 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)all complete and as directed by Engineer-in-charge.
a) For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 29375.27 Kgs 415.34 Rupees Four Hundred Fifteen and Thirty Four Paise Only 12200724.64
b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) all complete and as directed by Engineer-in-charge. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 18223.59 Kgs 502.22 Rupees Five Hundred Two and Twenty Two Paise Only 9152251.37
8 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer in-charge.
a) Pre-laminated particle board with decorative lamination on both sides 4078.20 Sqm 935.80 Rupees Nine Hundred Thirty Five and Eighty Paise Only 3816379.56
9 Refixing of prelaminated partical board of above respective dismental item in aluminium partition frame, including whenever necessary cutting in size , making good for fixing etc. all complete and as directed by Engineer-in-charge. 2656.50 Sqm 266.57 Rupees Two Hundred Sixty Six and Fifty Seven Paise Only 708143.21
10 Providing and fixing in position Bearing wheel of approved make for sliding window shutter all complete and as directed by Engineer-in-charge. 100.00 Nos 55.37 Rupees Fifty Five and Thirty Seven Paise Only 5537.00
11 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) all complete and as directed by Engineer-in-charge.
a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 300.00 Sqm 1262.88 Rupees One Thousand Two Hundred Sixty Two and Eighty Eight Paise Only 378864.00
12 Providing and fixing aluminium 200x10 mm aldrop, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete and as directed by Engineer-in-charge. 60.00 Nos 83.65 Rupees Eighty Three and Sixty Five Paise Only 5019.00
13 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. all complete and as directed by Engineer-in-charge.
a) 125 mm size 60.00 Nos 55.58 Rupees Fifty Five and Fifty Eight Paise Only 3334.80
14 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. all complete and as directed by Engineer-in-charge.
a) 100x60x2.50 mm 150.00 Nos 89.23 Rupees Eighty Nine and Twenty Three Paise Only 13384.50
15 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete and as directed by Engineer-in-charge. 30.00 Nos 824.85 Rupees Eight Hundred Twenty Four and Eighty Five Paise Only 24745.50
16 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. all complete and as directed by Engineer-in-charge. 30.00 Nos 729.03 Rupees Seven Hundred Twenty Nine and Three Paise Only 21870.90
17 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.all complete and as directed by Engineer-in-charge. 10.00 Nos 943.73 Rupees Nine Hundred Forty Three and Seventy Three Paise Only 9437.30
18 Supplying and fixing mechanical operated gear operated type with gear box and crank handle rolling shutter of approved make made of 80 x 1.2 mm MS laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking use complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and 1.2mm thick MS top cover for rolling shutters all complete and as directed by Engineer-in-charge. 72.00 Sqm 3766.07 Rupees Three Thousand Seven Hundred Sixty Six and Seven Paise Only 271157.04
19 a) Providing and applying two coats of synthetic enamel paint on steel surface of any description of approved quality and shade over one coat of red oxide of approved brand and shade on newly treated surface including preparation of surface to be done before applying primer and cleaning etc all complete and as directed by Engineer-in-charge. 1268.68 Sqm 86.25 Rupees Eighty Six and Twenty Five Paise Only 109423.65
b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works 1268.68 Sqm 56.55 Rupees Fifty Six and Fifty Five Paise Only 71743.85
20 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. all complete and as directed by Engineer-in-charge.
a) GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 250.00 Sqm 1596.54 Rupees One Thousand Five Hundred Ninety Six and Fifty Four Paise Only 399135.00
Sub-Total (Excluding GST) Rupees Three Crore Five Lakh Forty Eight Thousand Three Hundred Forty Three and Seventy Five Paise Only 30,548,343.76
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Basic Amount Put to Tender Select Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 30548343.76 BELOW % 30,548,343.76
Add 18% GST Rupees Fifty Four Lakh Ninety Eight Thousand Seven Hundred One and Eighty Seven Paise Only 5,498,701.88
Grand Total (Including GST) Rupees Three Crore Sixty Lakh Forty Seven Thousand Forty Five and Sixty Three Paise Only 36,047,045.63
Note: (i) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess (if any), Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
AIRCRAFT OVERHAUL DIVISION, NASHIK
Pre-Qualification Profile
Tender Ref No. or Contract No.: NK/FW/C-1581A/2024-25
Name of Work: Modification / repair works (Civil) in LCA hangar/s in HAL-Nashik factory areas.
Estimated Amount in : Rs. 360.43 Lakhs
Tender Notice no.: NK/FW/535/2024-25
Sl.No Description Details Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Related Document to be Uploaded to eProcurement Portal.
4 Address for correspondence:
5 PAN No.: Related Document to be Uploaded to eProcurement Portal.
6 Contact details
Contact person name
Ph. No. with STD code
FAX No. with STD code
7 I.T Returns for past 03 years (Assesment Year)
2021-22 Related Document to be Uploaded to eProcurement Portal.
8 Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] Audited copies and Audit report by CA with UDIN of financial documents for last five (5) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.
Financial YEAR TURN OVER (Rs. In Lakhs) REMARKS
2018-19 Related Document to be Uploaded to eProcurement Portal. Profit & loss statement duly certified by CA with UDIN
9 ESIC , PF & GSTIN Nos with proof
ESIC Registration No. with proof Related Document to be Uploaded to eProcurement Portal.
PF Registration No. with proof
GSTIN Registration No. with proof
10 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc(New bidder).
Name of the Bank
Type of Account
11 Latest Bankers Solvency Certificate from Nationalized or Scheduled Bank issued within a period of 12 months from the final date of Submission of Tender. (Should not be less than 40% of the Approx. estimated amount put to tender.)
Name of Bank & Branch Related Document to be Uploaded to eProcurement Portal.
Date of Issue [DD-MM-YYYY]:
Value (Rs. In Lakhs)
12 Experience of having successfully completed similar works "(As per "Work Details" table of Etender notice) ." during last 7 years ending on previous day of last day of submission of tender should be either of the following. [Latest work experience (completion) certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost of Amount put to the tender OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost of Amount put to the tender OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost of Amount put to the tender
Completed similar works during last 7 years
Work No I Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal.
Brief Description of Work:
Completed value of Work in `Lakh:
Date of Commencement of Work [DD/MM/YYYY]:
Date of Actual Completion of Work[DD/MM/YYYY]:
13 Value of the existing commitments and on-going works (Works in hand/in progress) to be completed in the next 10 months. (Work on Hand) Values (Rs. in Lakhs) (Required for bid capacity calculation)
Total Value (Rs in Lakhs) Related documents to be uploaded in eprocurement portal. Work on Hand. This statement should be submitted duly verified and certified by Chartered Accountant
14 Value of the work executed in last five years(Financial year wise) Values (Rs. in Lakhs) (Required for bid capacity calculation) Related documents to be uploaded in eprocurement portal. This statement should be submitted duly verified and certified by Chartered Accountant
15 Assessed Available Bid Capacit =2xAxN-B Related documents to be uploaded in eprocurement portal.
16 License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works) Not applicable Related Document to be Uploaded to e-procurement portal. i.e License or udertaking
17 Bank Balance statement for last three months. Related documents to be uploaded in eprocurement portal.
18 Details of latest overdraft facilities available with bank. Related documents to be uploaded in eprocurement portal.
19 Details of plant & Machinery for the work. Related documents to be uploaded in eprocurement portal.
20 Proposed work completion schedule in the form of bar- chart. Related documents to be uploaded in eprocurement portal.
21 Details of person holding the power of Attorney.
Name Related Document to be Uploaded in eProcurement Portal.
Ph. No. with STD code
22 Acceptance by party for Scope of work as per BOQ and Tender terms & conditions Please write Accepted/ Not Accepted
a The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to146) including price bid do hereby accept all the terms and conditions laid down Please write Accepted/ Not Accepted
b I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Please write Accepted/ Not Accepted
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice..pdf
TENDER_DOCUMENT • 0.46 MB
PriceBid.xlsm
TENDER_DOCUMENT • 0.08 MB
Tender_Document.pdf
TENDER_DOCUMENT • 1.63 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
Prequalification_profile.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .