Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC NUTANCHATI BHOWMIK GATE BANKURA | BANKURA | WEST BENGAL | 713142 | ₹13.2 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹13.2 LRejected-Finance 210 A CINEMA ROAD BANKURA W B | BANKURA | BANKURA | WEST BENGAL | ₹13.2 L | L2 | Rejected-Finance Rejected |
| 3 | L3₹13.2 LRejected-Finance KHATRA BANKURA | KHATRA | BANKURA | WEST BENGAL | ₹13.2 L | L3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | UNITED TRADERS L3 | PRADIP KUMAR DHABAL L1 | AMITAVA CHAKRABORTY L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply delivery at site of Indoor type, compartmentalized wall mounted, single front with 2mm thick CRCA MS sheet for non-load bearing & 2mm for Load bearing members. Gland plates will be provided detachable and undrilled at bottom, having Degree of protection – IP54, Powder coated painting will be done after seven tank processes. Final shade will be RAL 7032. 20 HP SDS Panel for water level control wiith following specifiaction as per attachment. | 2 | each | 98,350 ₹1,96,700 | 98,100 ₹1,96,200 | 98,280 ₹1,96,560 |
| 2.00 | Supply delivery at site of Non Clog Submersible Pump Motor set ,3 Phase, 440 Volts, 2900 RPM Motor, Having Dischage Capacity of 100 M3/HR at 25mtr Head. Having following specification
Pump Casing , intermediate casing, Discharge Cover, Shaft, Bearing Bracket , Casing wear ring, Duckfoot bend , Motor Housing , Motor Housing cover - IS 210 GR FG 260, Having minimum pump efficiency of -62%, motor efficiency- 85%
(Model- KSB KRTK 80-251/122UG-S or equivalent) | 2 | each | 4,05,280 ₹8,10,560 | 4,05,200 ₹8,10,400 | 4,05,350 ₹8,10,700 |
| 3.00 | Fitting fixing of above Supplied Pump motor with panel by withdrawling the old damage sludge pump from the sludge bed including supply of all necessaries materials i.e-non metallic full face supper quality rubber gasket, Glang Packing, M.S Nut Bolt & Washer etc. after withdrawing the existing pump with Testing & checking the above repaired pumping machinery one by one by the 4 hr continuous run up to satisfaction of E.I.C as per direction of E.I.C | 1 | LS | 1,00,600 ₹1,00,600 | 1,00,500 ₹1,00,500 | 1,00,500 ₹1,00,500 |
| 4.00 | Add: 18% GST | 1 | L.S | 1,99,414.8 ₹1,99,414.8 | 1,99,278 ₹1,99,278 | 1,99,396.8 ₹1,99,396.8 |
| 5.00 | Add: 1% Cess | 1 | L.S | 13,072.75 ₹13,072.75 | 13,063.78 ₹13,063.78 | 13,071.57 ₹13,071.57 |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
6 Apr 2026, 6:00 pmClosed
Executive Engineer, BMD, PHED
Office of the Executive Engineer. Bankura Mechanical Division. P.H.E. Dte. Ailakundi, PO Kenduadihi, Bankura 722102.
Supply delivery and fitting fixing of Non Clog Submersible Pump Motor set with new panel at existing sludge bed at WTP of Mukutmonipur New under Khatra, Hirbandh, Ranibandh Surface Water Based Piped Water Supply Scheme at Khatra Block,
2026_PHED_1015681_13
WBPHED/EE/BMD/NIeT-24 OF 2025-2026
Open Tender
MECHANICAL
30 days
Bankura
Please refer Tender documents.
5 documents required · 5 mandatory
₹28,000
Yes
26 May 2026
19 Mar 2026
9 Apr 2026
19 Mar 2026
6 Apr 2026
19 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply delivery at site of Indoor type, compartmentalized wall mounted, single front with 2mm thick CRCA MS sheet for non-load bearing & 2mm for Load bearing members. Gland plates will be provided detachable and undrilled at bottom, having Degree of protection – IP54, Powder coated painting will be done after seven tank processes. Final shade will be RAL 7032. 20 HP SDS Panel for water level control wiith following specifiaction as per attachment. | |||||
| 2Supply delivery at site of Non Clog Submersible Pump Motor set ,3 Phase, 440 Volts, 2900 RPM Motor, Having Dischage Capacity of 100 M3/HR at 25mtr Head. Having following specification Pump Casing , intermediate casing, Discharge Cover, Shaft, Bearing Bracket , Casing wear ring, Duckfoot bend , Motor Housing , Motor Housing cover - IS 210 GR FG 260, Having minimum pump efficiency of -62%, motor efficiency- 85% (Model- KSB KRTK 80-251/122UG-S or equivalent) | |||||
| 3Fitting fixing of above Supplied Pump motor with panel by withdrawling the old damage sludge pump from the sludge bed including supply of all necessaries materials i.e-non metallic full face supper quality rubber gasket, Glang Packing, M.S Nut Bolt & Washer etc. after withdrawing the existing pump with Testing & checking the above repaired pumping machinery one by one by the 4 hr continuous run up to satisfaction of E.I.C as per direction of E.I.C | |||||
| 4Add: 18% GST | |||||
| 5Add: 1% Cess | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.86 MB
Tendernotice_2.pdf
PDF • 1.11 MB
Tendernotice_3.pdf
PDF • 0.24 MB
BOQ_2515127.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid