Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.1 LAccepted-Finance | ₹6.1 L | L1 | Accepted-Finance ok |
| 2 | L2₹6.3 L+₹17,700 (2.88%)Accepted-Finance 4314 FIRST FLOOR KIKAR BAZAR BATHINDA 151001 PUNJAB | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹6.3 L+₹17,700 (2.88%) | L2 | Accepted-Finance ok |
| 3 | L3₹7.3 L+₹1.2 L (19.5%)Accepted-Finance | ₹7.3 L+₹1.2 L (19.5%) | L3 | Accepted-Finance ok |
| 4 | L4₹8.4 L+₹2.3 L (37.5%)Accepted-Finance | ₹8.4 L+₹2.3 L (37.5%) | L4 | Accepted-Finance ok |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-Does not fulfill NIT Condition |
| Sl No | Description | Qty | Unit | KAMLESH ENGINEERING WORKS L3 | SANJAY SALES CORPORATION L2 | ARYAN TRADERS L4 | M/S Shreepathy Engineers L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of valves for Modification of size 500 mm dia. inlet valves of filter bed no. 01 to 05 installed at North Filter House, HP-I by carrying out the following works. Dismantling the drive spindle from the top of C.I hand wheel & other one intermediate shaft couple etc. Making and arrangement to dismantle the Sluice Valve upper dome (C.I) by cutting of all nut bolts by gas cutter etc. and taking out upper dome from the main body of valve to safer side in the Filter house. Taking out C.I. flap of sluice valve from the main body of sluice valve with the help of special arrangements. Taking out all the material from the site to ground level by manual heavy labour arrangement to load the same in truck for modification at work shop by amendment of parts as required for above job. | 5 | JOBS | 43,125 ₹50,887.5 Lowest | 50,000 ₹59,000 | 60,000 ₹70,800 | 65,000 ₹76,700 |
| 2.00 | Providing the Thrust bearing (02 nos.) No. each 51211. Make – FAG /SKF | 5 | JOBS | 16,525 ₹19,499.5 | 12,500 ₹14,750 Lowest | 75,000 ₹88,500 | 13,000 ₹15,340 |
| 3.00 | Providing the fabricated C.I./M.S. bearing housing for thrust bearing complete with all accessories as per site requirement for fixing / installation of bearings as required. | 5 | JOBS | 25,875 ₹30,532.5 Lowest | 75,000 ₹88,500 | 60,000 ₹70,800 | 73,125 ₹86,287.5 |
| 4.00 | Making an arrangement at the top of C.I Pedestal for fixing of thrust bearing by providing M.S. block of size 200x200x30mm Plate duly drilling and fixing by L.N bolt as required | 5 | JOBS | 60,050 ₹70,859 | 50,000 ₹59,000 | 45,000 ₹53,100 | 40,625 ₹47,937.5 Lowest |
| 5.00 | Repairing of GM Nut seat in CI flap by cutting of old damaged seat and fixing of new seat by nut bolts etc. as required. | 5 | JOBS | 77,450 ₹91,391 | 60,000 ₹70,800 | 40,000 ₹47,200 Lowest | 48,750 ₹57,525 |
| 6.00 | P/F S.S Shaft 40 mm dia X 5.5 Mtr. Long approx in two pieces along with S.S Coupler of size 75 X 200 mm complete with pin. | 5 | JOBS | 1,70,775 ₹2,01,514.5 | 90,000 ₹1,06,200 | 1,75,000 ₹2,06,500 | 81,250 ₹95,875 Lowest |
| 7.00 | Making/fixing C.I. / M.S. block in place of G.M Nut of Sluice Valve for lifting of sluice valve along with S.S Bar of size 55mm Dia, Length – 1.5 mtr. long duly machining. Fixing the C.I / M.S Block with the help of electric welding machine. , making threading for coupler and for making gland seat in shaft. | 5 | JOBS | 63,825 ₹75,313.5 | 50,000 ₹59,000 | 75,000 ₹88,500 | 39,000 ₹46,020 Lowest |
| 8.00 | Providing the GM nut with attachment with bearing housing and rotation arrangement as per site requirement. | 5 | JOBS | 25,875 ₹30,532.5 | 35,000 ₹41,300 | 25,000 ₹29,500 Lowest | 40,625 ₹47,937.5 |
| 9.00 | Providing the M.S fabricated wheel for drive arrangement of sluice valve. | 5 | JOBS | 43,125 ₹50,887.5 | 25,000 ₹29,500 | 45,000 ₹53,100 | 21,125 ₹24,927.5 Lowest |
| 10.00 | Assembling of complete valve along with parts with the help of tripod chain block arrangement with nut bolt packing and gland bolt etc. as per requirement. | 5 | JOBS | 77,625 ₹91,597.5 | 62,500 ₹73,750 Lowest | 75,000 ₹88,500 | 65,000 ₹76,700 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
3 Aug 2026, 2:30 pmClosed
EE EnM HP I
DELHI JAL BOARD GOVT OF NCT OF DELHI OFFICE OF THE EXECUTIVE ENGINEER EnM HP I HAIDERPUR WATER WORKS DELHI 110085
Up-gradation n modification of the filter beds valves at North filter House HP-I, WW. i.e. inlet valves of filter bed No 01 to 05).
2026_DJB_295932_4
NIT NO. 04(2026-27) HP-I
Open Tender
Miscellaneous Works
Works
EE EnM HP I
Please refer tender documents
3 documents required · 3 mandatory
₹500
SAB PAISA PORTAL Ac No. 50448339804
₹20,000
11 Aug 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of valves for Modification of size 500 mm dia. inlet valves of filter bed no. 01 to 05 installed at North Filter House, HP-I by carrying out the following works. Dismantling the drive spindle from the top of C.I hand wheel & other one intermediate shaft couple etc. Making and arrangement to dismantle the Sluice Valve upper dome (C.I) by cutting of all nut bolts by gas cutter etc. and taking out upper dome from the main body of valve to safer side in the Filter house. Taking out C.I. flap of sluice valve from the main body of sluice valve with the help of special arrangements. Taking out all the material from the site to ground level by manual heavy labour arrangement to load the same in truck for modification at work shop by amendment of parts as required for above job. | 5 | JOBS | - | - |
| 2 | Providing the Thrust bearing (02 nos.) No. each 51211. Make – FAG /SKF | 5 | JOBS | - | - |
| 3 | Providing the fabricated C.I./M.S. bearing housing for thrust bearing complete with all accessories as per site requirement for fixing / installation of bearings as required. | 5 | JOBS | - | - |
| 4 | Making an arrangement at the top of C.I Pedestal for fixing of thrust bearing by providing M.S. block of size 200x200x30mm Plate duly drilling and fixing by L.N bolt as required | 5 | JOBS | - | - |
| 5 | Repairing of GM Nut seat in CI flap by cutting of old damaged seat and fixing of new seat by nut bolts etc. as required. | 5 | JOBS | - | - |
| 6 | P/F S.S Shaft 40 mm dia X 5.5 Mtr. Long approx in two pieces along with S.S Coupler of size 75 X 200 mm complete with pin. | 5 | JOBS | - | - |
| 7 | Making/fixing C.I. / M.S. block in place of G.M Nut of Sluice Valve for lifting of sluice valve along with S.S Bar of size 55mm Dia, Length – 1.5 mtr. long duly machining. Fixing the C.I / M.S Block with the help of electric welding machine. , making threading for coupler and for making gland seat in shaft. | 5 | JOBS | - | - |
| 8 | Providing the GM nut with attachment with bearing housing and rotation arrangement as per site requirement. | 5 | JOBS | - | - |
| 9 | Providing the M.S fabricated wheel for drive arrangement of sluice valve. | 5 | JOBS | - | - |
| 10 | Assembling of complete valve along with parts with the help of tripod chain block arrangement with nut bolt packing and gland bolt etc. as per requirement. | 5 | JOBS | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
BOQ_393844.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .