WORKS

Amount

Opening cutting and dismantling of R, Y and B Phase of 132 KV at exising Transfer bus bar Panther conductor between bus section below gantries step by step during busbar replacement work including dismantling of all type of associated clamp fittings and suspension string.

Dismantling of following existing jumpers from 132 KV Transfer bus bar and jack busbar by opening of all associated clamp step by step during busbar replacement work jumpers of ACSR Zebra/ Panther conductor of Transformer line for bus coupler etc.

Stringing and proper sagging of new 132 KV Transfer busbar sections of 24/36 meters for R, Y & B Phases withTrantulla/Moose conductor. The work includes fitting of tension clamp hoisting of 70/120KN disc insulator tension fitting spacer PG/C-wedge clamp etc and cutting of conductor as per required.

Reconnecting following new jumpers of different bays after fixing spacer, clamps as required connecting jumpers of a twin Zebra conductor of Transformer bay line bay and bus coupler bays by cutting in proper size.

Safely Dismantling of 3 Phase over head Line of Dog Conductor obstructing stringing of 33 kV transfer bus. Work include all labour, T&P required to complete the work satisfactorily.

Safely Dismantling of C type Chanel, pin/Disc Insulators Hosted on Rail DP in 33 KV S/Yard & Work include all labour T&P required the work satisfactorily.

Safely Dismantling of Rail Pole grouted at various Place within 33 kv switch yard along the boundry wall of switchyard obstructing in the stringing of 33 kV transfer Bus-bar. Work include all labour T&P required the work satisfactorily.

Cutting of Rail pole suitable for the stringing of 33 kv Transfer bus bar with the help of gas cutter etc. all labour T&P required the work satisfactorily.

Erection of rail Pole with the help of long boom crane/hydra at proper place. Work also include shifting of Rail Pole manually within 33 KV switchyard by sufficient menpower.

Earthing of 33 kv Main, auxiliary structure and other equipments with MS flat 50x6 mm. MS flat of size 50x6 mm shall be provided by UPPTCL. Earthing shall be done as per UPPTCL norms.

Providing and fixing of stay set with stay wire at the both end to support Rail Pole.

Strining of 3 phase 33 KV Transfer bus bar with panther conductor including fitting of tension clamp, hoisting of insulator, cutting of conductor and also shifting of all material from store to erection site and all other associated work required to complete the work satisfactory as per technical specification.

Jumpering of 33 KV transfer Bus to Transfer Bus isolators with the help of panther conductor cutting. Bending, clamping and other associated work required to complete the job satisfactory (Clamps and conductor is provided by department)

Jumpering of 33 KV Feeder bay with ACSR Panther conductor between line isolator and transfer bus isolator with suitable clamps (Clamps and conductor is provided by department.)

Excavation for Laying of earthmat mesh made of 3mtrX3mtr square & on both edges MS rod at 0.75 mtrs with 40 mm M.S. Round bar 800mm below ground level and connecting to the main mat of X-axis at two places & Y axis at two places (Shifting of 33 KV XLPE Cables from route of MS round earth rod is included with safety) including excavation of area approx.3.5 mtrX3.5 mtr, 80 cm below ground level, its back filling including all other associated works to complete the work satisfactorily as per technical specifications and drawings excluding the cost of MS bar. This excavation work is to be carried out near the crossing of X-Axis & Y- axis.

welding of 90 degree Cross joints at all four sides of earth mat mesh as specified in above sl no shall be made with the welding of piece of angle 50X50X5mm / M.S. Flat 50X6mm including painting with black japan paint. MS Flat / Angle shall be provided by department.

welding of end joints of earth mat rod to the end electrodes (newly fixed & old Fixed) which shall be made with 50X6 mm flat or 50X50X5 mm angle piece with proper welding including painting with black japan paint. MS Flat / Angle shall be provided by department.

Fabrication of 3 meter long Electrode with 40 mm Dia MS round having 150 mm long conical shape and then its peircing its vertically inside the ground with top 700mm below ground level and its welding with earthmat excluding the cost of M.S bar as per technical specification

Supply & Fixing of Panther To Panther C-Wedge clamps (RPG make) on the 33 kV feeder jumper to 33 kV Transfer Bus

33 kV Pin Insulators for support of Transfer Bus bar on Rail pole.

BARKATI ENTERPRISES

M/S A K ELECTRICAL