Tiruppur City Municipal Coporation Maintenance and Special Repair Work at Nanjappa Nagar Community Hall in Ward No 07

Amount

Paving the floor with 10mm thick Double Charged Vitrified Tiles in all floors over a base layer of cement mortar 1:3 [one cement and three M-sand] 20mm thick of walls and floors and pointed with the same colour cement neatly, including polishing with electric polishers to a high degree so as to make it perfectly smooth and showing etc., complete complying with standard specification.

Dadooing the walls with Colour Designed glazed tiles of size 300mm x 200mm x 6mm of approved make and quality in cement mortar 1:2 mix [one cement and two M-sand] over 10mm base layer plastering and pointing with white cement neatly etc., complete as per standard specification.

Ceiling Plastering with cement mortar 1:3 mix (one cement three P-sand), 10mm thick in all floors for RCC slabs, Beams, Sunshades including packing, providing cement mortar beading for sunshades, staircase steps, landing slabs etc., as directed by the departmental officers etc., complete complying with standard specifications.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification.

Painting two coats with approved Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification.

Supplying and fixing in position White glazed earthenware Oriya type INDIAN WATER CLOSET of size 580mm x 440mm of approved quality with 'P' (or) 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring around the closet using 40mm broken brick jelly in lime concrete 1:2:5 mix (one lime, two M-sand and five brick jelly) 100m thick and finishing the top to the required slope and including giving necessary connection to the cast iron soil pipes / PVC pipes by dismantling the brick masonry, reinforced concrete roof / floor slab and making good the disturbed portion to original condition without any leakage etc., complete complying with standard specification.

Supplying and fixing in position of Indian make white glazed earthenware WASH HAND BASIN of size 550x400mm with a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waste water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specification.

Supply and fixing of M.S Grills with Doors, Windows, Ventilators and Gates of required size suitable to site condition with one coat of red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc., complete as per standard specification.

Painting two coats for New iron work surface using best quality synthetic enamel paint etc., complete complying with standard specification.

Supply and fixing of TNEB main board suitable for 32A Three phase service connection with three no .32A fuse units (500V) 32a neutral link and earth link (1" X 1/8" copper flat) on TW plank of size 600mm X 450mm X 19mm with supporting TW reepers of 1" thice an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter conection with 7/20 PVC insulated copper wire from EB meter to fuse unit as per standard specification.

Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450mm etc complete as per standard specification.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting. SD-89.

supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD - 534)

Add GST @ 18%

J.SARAVANAN