CERTAIN E/M SPECIAL REPAIR, REVENUE WORK AND MINOR WORKS AT DAMANA, SUNJUWAN AND MIRANSAHIB UNDER GE JAMMU

Amount

M & L for replacement of tubing GI (medium grade) with all fittings laid in floor or trenches including taking out old UNSV pipe of size 40 mm dia complete all as specified and directed.

M & L for replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm bore all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms all as specified and as directed.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point all as specified and as directed.

M & L for replacement of cast iron water main with flanged and centrifugally cast class 'B' in any length laid in trenches of size 150 mm bore all as specified and as directed.

M & L for replacement of CI fitting any type, radius and angle for spigot and socketed and flanged pipes, laid piece both end flanged or one end flanged other sockested, cap, plug, dead end flanged, split collar, reducer of any size upto 150 mm bore pipe all as specified and as directed.

M & L for replacement of CI sluice valve PN 1.6 with iron wheel head of size 150 mm bore with stainless steel spindle both end flanged complete with nut, bolts, washer and rubber gaskit 3 mm thick conforming to ISI 14846/2000 complete all as specified and directed.

M & L for replacement of foot valve of size 150 mm bore dia flanged end, lift type conforming to ISI 4038 with stain less steel working part complete with rubber gaskit and nut, bolts washers etc all as specified and directed by Engr-in Charge.

M & L for replacement of foot valve of size 80 mm bore dia flanged end, lift type conforming to ISI 4038 with stain less steel working part complete with rubber gaskit and nut, bolts washers etc all as specified and directed by Engr-in Charge.

S&F in replacement of cast iron body stem stainless steel butterfly valve with gun metal seat-EPDM (Integrally moulded) with powder coated carbon steel handle and notch plate confirming to IS-2101-9200 of size 150 mm all as specified and as directed.

M & L for replacement of water pressure gauge 100 mm dia having pressure 10 kg complete with 3/8" brass sampling lock all as specified and as directed.

M & L for fabrication of angle iron base frame for centrifugal pumping set made out from angle iron of size 50 x 50 x 6 mm thick, bend to shape, cutting, welding as per site requirement of suitable for pumping set complete with drilling, making hole 16 mm dia for fixing pumping set including grouping/ fixing in RCC and two coat painting of black synthetic enemell paint and a coat of red oxide primer all as specified and as directed.

M & L for cement concrete type B-2, 1:2:4 (40 mm graded stone aggregate) in foundation, filling and mass concrete for centrifugal pumping set base platform all as specified and as directed.

M & L for replacement of nut, bolts fully threaded 30 cm long x 16 mm dia heavy duty complete with MS washer and bolt including grouping in RCC base platform all as specified and as directed.

Taking out existing UNSV Spigot & Socket pipe of size 150 mm dia complete with fitting from the excavation all as specified and as directed.

Taking out existing UNSV flanged pipe including all fitting of size 150 mm dia complete with fitting from the foundation all as specified and as directed.

Cutting to existing cast iron pipe of size 150 mm dia in position for insertion of Tee or for branch connection or for Addn/Altrn complete with and including necessary welding as per site requirement all as specified and as directed.

M & L for replacement of tubing GI (medium grade) with all fittings laid in floor or trenches including taking out old UNSV pipe of size 100 mm dia complete all as specified and directed.

M & L for replacement of tubing GI (medium grade) with all fittings laid in floor or trenches including taking out old UNSV pipe of size 25 mm dia complete all as specified and directed.

M & L for replacement of tubing GI (medium grade) with all fittings laid in floor or trenches including taking out old UNSV pipe of size 20 mm dia complete all as specified and directed.

M & L for replacement of gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore all as specified and as directed.

M&L for heavy duty MS column pipe with both end flanged of 125 mm dia having length of 3 mtr all as specified and as directed.

S&F in replacement of rubber gaskit 150 mm dia, 3 mm thick for flanged joint all as specified and as directed.

M&L for cutting to existing UNSV blokage GI pipe line of size 20 to 25 mm dia in position on wall/ in trenches complete with and including excavation, returning filling, removal, threading both end in position and insertion of TEE, Socket, Union or addn/altrn complete all as specified & directed. Note:- Fitting will be supplied, measured & paid separately under respective item.

Supply only Union GI (medium grade) 25 mm dia ISI mark all as specified and as directed.

Supply only TEE GI (medium grade) 25 mm dia ISI mark all as specified and as directed.

Supply only Socket GI (medium grade) 25 mm dia ISI mark all as specified and as directed.

Supply only Elbow GI (medium grade) 25mm dia ISI mark all as specified and as directed.

Supply only Nipple GI (medium grade) 25mm x 150mm dia ISI mark all as specified and as directed.

Supply only Nipple GI (medium grade) 25mm x 100mm dia ISI mark all as specified and as directed.

Supply only Elbow GI (medium grade) 20mm dia ISI mark all as specified and as directed.

Supply only Union GI (medium grade) 20 mm dia ISI mark all as specified and as directed.

Supply only Socket GI (medium grade) 20 mm dia ISI mark all as specified and as directed.

Supply only Nipple GI (medium grade) 20mm x 100mm dia ISI mark all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan not exc. 6 m mean radius built in CM 1:4 for sluice valve pit all as specified and as directed.

M & L for rendering plaster 10 mm thick on fair face of brick work or concrete surface inside sluice valve pit in CM 1:6 complete all as specified and directed.

Taking down plaster of any thickness on brick or stone wall of sluice valve pit including racking out joints, hacking for key, scrubing down, of any description all as specified and as directed.

M & L for preparation of rusted or previous untreated surface of old painted surface of MS tank of filter plant along with connected item and valve scrubing, cleaning and painting to description over 10 cm in wide or girth not otherwise described and painted with synthetic enamelled black paint two coat over a coat of red oxide primer including writing location/area with white paint all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in any type of soil for taking up or laying of GI/CI pipe line, laying of cables, foundation, filling of poles or stays all as specified and directed.

S&F in replacement of PVC rubber hose pipe 80 mm dia heavy duty complete with MS flange all as specified and as directed.

S&F in replacement of PVC core nylon brush 24" long for sweeper pool cleaner all as specified and as directed.

M&L for construction of valve pit chamber of size 90cm x 90 cmx 90cm internal dimension brick/stone construction including all excavation and earth work in any type of soil, returning , filling in dispoosal of surplus soil to a distance noot exc 50m and depositing were directed, PCC foundation of the mix (1:2:4) type D-2, brick masonry including plastering, rendering 12mm thick in cement morter 1:4 internally finished even and fair and flush point externally as the work proceeds in same morter and suitable size angle frame with mild steel angle iron 40x40x6mm, MS sheet cover 3.15 mm thick with handle and locking arrangement and painting all sheet surfaces with two coat of synthetic enamelled paint cover a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bituminus paint as approved, complete all as specified and directed.

M & L for replacement of cast iron water main with Spigot & Socket pipe centrifugally cast class 'B' in any length laid in trenches of size 150 mm bore all as specified and as directed.

M&L run lead joint for Spigot & Socket pipes and their fittings of size 150 mm all as specified and as directed.

Disconnecting existing centrifugal pumping set by opening nut, bolts, electric connection and refitted after preparing box frame all as per site requirement and testing on full load all as specified and as directed.

S&F in replacement of submersible cable flat 3 core 16 Sqmm copper conductor 1100 volt grade all as specified and as directed.

S&F cast iron non return valve PN 1.6 of size 150 mm both end flabged complete with rubber gaskit 3 mm thick conforming to IS-5312/2004 duly ISI marked all as specified and as directed.

S&F in repair LED street light fittings, 1x60 Watt, powder coated pressure die cast aluminium compact high power LED street light with heat resistant toughened glass with lens complete fixing with the existing GI bracket with proper arrangement all as specified and as directed.

S&F street light bracket made out of from GI light grade pipe of suitable dia and length with two Nos MS flat clamps made out from ms flate of size 25×6 mm thick complete with cutting, bend to shape, drilling four Nos holes in each clamps including provision nut bolts, washers and painted in steel surfaces with two coat of aluminium paint over a coat of red oxide primer (set of two clamps) all as specified and directed.

S&F in replacement of cable PVC insulated and seathed multistranded aluminium conductor FR of size 1.5 Sqmm 3 core for LED street light connection drawn through the steel tubular pole or MS conduit pipe all as specified and directed.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed.

Taking down old and unserviceable submain wiring any size of two core & incldung earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, all as specified and as directed by Engr-in-charge.

Taking down old and unserviceable, distribution board any type including MCBs etc after removing all connection and make good the disturbed surface all as specified and as directed by Engr-in-charge.

M&L for point wiring for one light/fan/5 Amps independent socket point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note : (a)The rates coded includes cutting the wall /ceiling (35cm x 45 cm) and filling with cement mortor 1:3 after fitting the PVC conduit as mentioned above complete with colour matching etc. (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch all as specified and as directed.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-charge.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-charge.

All as per item No 54 above here-in-before but wiring with 2.5 sqmm copper cable with 1.5 sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket out let on independent board with other switch complete all as specified and directed by Engr-in-charge.

Supply & fixing only switch piano flush button type 05 Amp single pole, one way complete all as specified and directed.

Supply & Fixing only switch piano flush button type 15 Amps SP one way complete all as specified and directed.

S&F only socket outlet multi purpose 3 pin 2 pin 05 Amp flush type complete all as specified and directed.

S&F only socket outlet multi purpose 6 pin and 3 pin, 15 Amp flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals PVC/Poly carbonate/Isolated body 65 x 50 mm size complete all as specified and directed.

S&F only fan regulator resistance type and making all necessary connection to the regulator complete all as specified and directed.

Supply & fixing only bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing bell AC 230V single pole complete all as specified and directed.

M& L in replacement for Lamp holder , insulated body , with back plate suitable for batten fittings Complete all as directed.

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz all as specified and as directed.

S&F LED Bulk head fitting of cap 10 watt Aluminium PDC housing,toughened glass cover with IP 65 protection complete wth LED Bulb all as specified and directed by Engr-in-charge

S&F ceilling fixing Ceramic and glass LED Ceiling lights of wattage 12 W including removing existing complete all as specified and directed.

S&F Extruded aluminium powder coated housing with pressure die cast end caps LED pendent Edge Lit Up- Down suspended light IP33 ,32 Wattage, 230 volts 50 HZ all as specified and as directed.

S & F of Energy Saving Endura Cityliner, LED street light fitting 45 watt comprising a single piece, environment friendly light fittings including electrinic driver, luminaire housing is of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range is from 85 Volts to 264 Volts AC 50 Hz all as specified and as directed.

Supply and fixing Ceiling Fans 1200 mm sweep 240 volts 50 Hz, ISI marked complete all as specified and as directed.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enameled neutral bus bar 8 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and as directed.

S&F MCB single pole 240 volts, 06 to 40 Amps,"B" series 10 KA complete all as specified and as directed.

S&F MCB single pole neutral 240 volts, 40Amps, ,"B" series 10 KA complete all as specified and as directed.

Re- filling the wall from where the DB board is replaced after fitting the DBs in wall with sub - class ' B ' bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar with ratio 1:6 complete all as specified and directed by Engr - in - Charge.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLSH, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLSH, drawn through in new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length all as specified and as directed. Note : Wiring shall be done in proper colour coding.

Supply and fixing MCB SPN 63 amps 415 volt complete all as specified and as directed.

S&F Single pole and neutral encloure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps all as specified and as directed.

Taking down ceiling fans/Exhaust fan, sealing cable end, dismantling blades and removing fan and blade to store of safe place of contractor for refixing after repair and painting of Bldg all as specified and as directed.

Hanging only ceiling fan/Exhaust fan connecting up including provision of cable from ceiling rose or connector to fan and rubber reel etc complete all as specified and directed by Engr-in-Charge.

S&F GI tube light grade 40 mm bore laid in trenches/road/drain/wall alongwith all fittings complete with MS clamp and nut bolts and washers etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and directed.

Supply and laying cable in replacement LT underground Cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade cross-sectional area 35 Sq mm, 3.5 core including taking out old one complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick work and GI pipe shall be measured and paid separately.

S&F in replacement distribution board double door (suitable for incomer MCCBs and out going MCB) TP & N vertical load line 6 Way complete with 200 Amps bus bar, 415 Volt sheet metal enclouser suitable for G frame MCCB all as specified and as directed.

S&F in replacement Isolator 4 Pole, TPN 415 volts, 100 Amps rating with rupturring cap 16 KA, complete all as specified and as directed.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16KA all as specified and as directed.

M&L for filling gaps of ceilling holes with cement after removing old hanging tube lights from ceilling and making good distribution surface as per existing all as specified and as directed by Engr-in-charge.

Removing Existing change overs and XLPE cables from the blgd and making good distribution surface as per existing and reconnecting the cables and sub main to new indoor pannel as per directions of Engr-in-charge.

Re- filling the wall from where the DB board is replaced after fitting the DBs in wall with sub - class ' B ' bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar with ratio 1:6 complete all as specified and directed by Engr - in - Charge.

Supply,install, commission and testing cubical type LT panel board,outdoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 3.15mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands complete all as specified and directed with the following accessories :-

MCCB 4 Pole 315A 35 KA With thermal based released (incoming)= 01 Nos

MCCB 3 Pole 100A 35 KA With thermal based released (Out going)= 2 Nos

LED indicating lamp (RYB)

On load change over switch 250 Amps -01 Nos

MCB 63 Amps 4 pole 25 KA -03 Nos

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate all as specified and as directed.

The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and fixing wall mounting fan,230 Volts single phase high speed range, 400mm sweep,swing type complete all as specified and directed by Engr-in-charge. Note:- Rates are deems to be included the provn of nuts,bolts,connected works,grouting in brick/stone/masonery wall.

Supply , installation, commissioning and testing Submersible pumping set of capacity 9000-10000 Gallons/Hr at 190 mtr head with outlet size 100-150mm bore suitable for 200mm borewell including electricmotor AC 3 phase,400-440 volts,50 C/S submersible not less than 40 HP capacity. Including taking up existing submersible/VT motor pumping set complete with MS column pipe ,cables and all connectted work complete all as specified and directed by Engr-in-charge.

Supply and fixing Submersible cable PVC of copper conductor of size 16 Sqmm 3 core flat heavyduty 1100 volts grade confirming to ISI (two lengths from panel to star delta atarter and motor of submersible pumping set) all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core all as specified and as directed.

S & F of Energy Saving, LED street light fitting 90 watt comprising a single piece, environment friendly light fittings including electrinic driver, luminaire housing is of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range is from 85 Volts to 264 Volts AC 50 Hz all as specified and as directed.

M&L for Pre stressed concrete pole 9.0 meter long 102mmX172 mm at Top and 12 mm and 279 mm at bottom class 10 all as specified and directed.

S&F SMC Pole mounted box of size 10"x 8"x 4" with hinged door incl Clamp, nuts, bolts and washers, complete with all as specified and directed and including follwing accessories: (a) MCB SP 10 Amp, 10 kA 'C' Series mounted on din rail-1 No. (b) Connector block suitable for 3ph, 4 wire min 16 sqmm cable-1 No

Supply & fix junction box of size made of MS Sheet front door openable with fixing screw ,powder coated including alumn bus bar 4 Nos of size 20x3mm mounted on epoxy based post insulators and drilled holes for connection all as required and fixed to poles incl MCB 10 A single pole all as required at site or directed by Engr-in-charge.

M&L of GI Pipe light grade 50 mm bore for cable protection as a guard pipe complete all as specified and as directed.

M&L for pre cast cement concrete ( 1:4:8) type D2 using 40mm graded stone aggregate for foundation filling of poles as mass concrete all as specified and as directed.

All as per Ser Item No 100.00 above but 1:3:6 for foundation filling of stays or coping of poles as mass concrete all as specified and as directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size) Steel body all as specified and as directed.

M&L for fabrication of desertcooler stand made out from angle iron 40X40X6 mm thick, bend to shape,welding as per site requirement fixing in brick/stone masonary wall complete with cemented work necessary rawl plug, nut, bolts etc all as specified and directed.

M/S Bali Agencies

SATISH AND CO

M/S S K Electricals Regd

Bidder Name

M/S S K Electricals Regd

SATISH AND CO

Sarbat Construction Co

M/S Bali Agencies