Interior or Renovation works for ECI at Nirvachan Sadan New Delhi 01

ABSTRACT OF COST / BOQ

S No DESCRIPTION Cost of DSR Items Cost of Non-DSR Items

1 CIVIL WORKS INR 1,309,683.81 INR 460,796.60

2 ELECTRICAL WORKS INR 1,524,847.00 INR 1,069,724.00

4 LIGHTING INR 0.00 INR 183,057.00

5 FURNITURE INR 8,381,016.00

6 PLUMBING INR 99,963.15 INR 216,423.29

TOTAL DSR+Non-DSR (A) INR 14,519,594.55

GRAND TOTAL - i/c GST INR 14,519,594.55

GRAND TOTAL - i/c GST INR 14,519,594.55

1 Digitally signed by

Ashok Ashok Kumar Jain

Kumar Jain Date: 2021.04.17

INTERIOR DESIGN WORKS AT ELECTION COMMISSION OF INDIA, NIRVACHAN SADAN, NEW DELHI

SCHEDULE OF QUANTITIES - CIVIL & INTERIOR WORKS

No TOTAL AMOUNT TOTAL AMOUNT

No TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE DSR (INR) NON-DSR (INR)

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 50.00 85.70 4,285.00

Based on Dismantling tile work in Wall dado laid in cement mortar including stacking

15.23.2 material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for

plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work manually / by mechanical means including stacking of

1.4 15.7 serviceable material and disposal of unserviceable material within 50 metres lead -

as per direction of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter

1.5 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within 50 -

15.12.1 Of area 3 sq. metres and below EACH 5.00 274.50 1,372.50

15.12.2 Of area beyond 3 sq. metres EACH 2.00 375.65 751.30

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false

1.6 15.57 ceiling including disposal of unserviceable material and stacking of serviceable SQM 15.00 42.00 630.00

material with in 50 meters lead as directed by Engineer-in-charge.

Demolishing cement concrete manually / by mechanical means including

disposal of material within 50 metres lead as per direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) CUM 5.00 1737.45 8,687.25

Dismantling C.I. pipes including excavation and refilling trenches after taking out

the pipes, manually / by mechanical means breaking lead caulked joints, melting

of lead and making into blocks including stacking of pipes & lead at site within 50

metre lead as per direction of Engineer-in-Charge:

Dismantling G.I. pipes (external work) including excavation and refilling trenches

1.9 15.44 after taking out the pipes, manually / by mechanical means including stacking of -

pipes within 50 metres lead as per direction of Engineer-in-Charge:

15.44.1 15 mm to 40 mm nominal bore RM 5.00 108.15 540.75

1.10 15.44.2 Above 40 mm nominal bore RM 5.00 117.75 588.75

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including

1.11 15.52 stacking of useful materials near the site and disposal of unserviceable materials Nos 2.00 668.15 1,336.30

within 50 metres lead.

Based on Dismantling o Wash basins, Urinals, WC including stacking of useful material near

item No the site and disposal of unservicable materials within 50 metres lead

Demolishing R.C.C. work manually / by mechanical means including stacking of

1.13 15.3 steel bars and disposal of unserviceable material within 50 metres lead as per cum 2.00 2534.70 5,069.40

direction of Engineer-in-Charge.

Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or

1.14 15.5 R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. sqm 10.00 863.35 8,633.50

work) as per direction of Engineer - in -charge.

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B.

Carriage of material by mechanical transport including loading unloading and

1.1.1 Lime, murrum, building rubbish -

TOTAL OF DISMANTLING 54,834.25

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

2.1 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry,

but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 950.00 498.35 473,432.50

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) CUM 5.00 7809.25 39,046.25

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 15.00 932.10 13,981.50

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick

2.6 13.4 ROUGH CEMENT PLASTER :- 12 mm cement plaster of mix -

Reinforced cement concrete work in beams, suspended floors, roofs having slope

up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,

2.7 5.3 staircases and spiral stair cases above plinth level up to floor five level, excluding CUM 1.20 9763.8 11,716.56

the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement

: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for

2.9 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 15.00 552.05 8,280.75

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 25.00 83.50 2,087.50

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with

water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to

2.12 22.5 air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with SQM 25.00 465.60 11,640.00

water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to

air cure for 4 hours followed with water curing for 48 hours. The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

2.35.3 300 mm apart including drilling 12 mm diameter holes and plugging with cement -

mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration SQM 950.00 227.05 215,697.50

SUB TOTAL OF MASONRY AND PLASTER 785,844.81 -

3 PAVING AND WET WORKS

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

3.1 8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement SQM 45.00 1030.30 46,363.50

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown,

laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white

cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid on 20mm thick cement

1.1 11.41 mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ -

sqm including grouting the joints with white cement and matching pigments etc.,

TOTAL FLOORING WORKS 108794.75 0.00

2.0 ROOFING WORKS

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-(Part I):

12.45.1 2011 (Board with BIS certification marks) SQM 200.00 1117.65 223530.00

Providing and fixing of mineral fiber ceiling tiles, with silhoutte grid Main Tees of size

32 (H) x 15 mm every 1.2M centre to centre, stitched cross Tee at 0.3 M centre to

centre to form a grid of size 1200 X 300 mm and suspending the grid from RCC roof

using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm

intervals. And laying mineral fiber Acoustic ceiling tiles MV (B-Pin) of size 1200 x 300

x 15 mm Narrow Revealed Ceiling Tile over the formed grid having fire rating of 60

minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise Reduction

Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.520.57 W/mk.

Humidity Resistance up to 99% at 50’C.

TOTAL ROOFING WORKS 223530.00 312796.60

3.0 MISCELLANEOUS WORKS

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved

3.1 13.83 brand and manufacture, including applying additional coats wherever required

to achieve even shade and colour.

The contractor will appoint a consultant for this project duly approved by

engineer-in-charge. The consultant has to prepare all the drawings, details, layout

plan, 2D/3D views (if required) etc and any other details as and when desired by

engineer-in-charge/ client. A lum sum fees of 1% of the estimated cost put to the

8 M.R. tender shall be paid by the contractor to the consultant within his quoted rates LS 1 148,000.00 148,000.00

before completion of the work. The payment details for consultancy shall be

submitted along his bill.

TOTAL MISCELLANEOUS WORKS 136680.00 148000.00

Total Civil Items 1309683.81 460796.60

INTERIOR DESIGN WORKS AT ELECTION COMMISSION OF INDIA, NIRVACHAN SADAN, NEW DELHI

SCHEDULE OF QUANTITIES - FURNITURE

S No Item Specifications Unit Offered Price Amount

Providing and placing panel & tile based modular workstation, with partition

thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium

trims. The fins along the depth shall be 22.8mm thick. Tiles: Combination of top

tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing

board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/

fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of

38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides +

0.6mm decorative laminate or fabric on both sides. The uprights and horizontals

Workstation shall be made of aluminium extrusion having average wall thickness of 1.2 mm &

1200 x 600 powder coated with epoxy- polyester powder. Particle board framing is used on

outer boundary of these blocks as well as intermediately at certain locations

forming conduit for passing cables. These blocks are located in the mid

segment of the panels and can be provided with cutouts for mounting switch boxes

(above or below the worktops)Fabricated bottom frame for 52.4mm (50mm

Minimum) panel comprises of L-channels made of 2mm thick CRCA steel (IS: 513),

formed plates of 3mm thick HR steel (IS: 2062) & ERW steel tube of size 35 mm (30

mm Minimum) x15 mm (10mm Minimum)x1.6mm thick in oval cross section (IS:

7138) welded together. This frame is bolted to the uprights with M6 screws. Top tiles

The cushioned seat and back assembly consists of seat base moulded in glass filled

Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted

polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane

foam used in seat and back cushion is moulded in density 45kg per m3. The seat

and back are firmly connected to the base frame and are cantilevered in such a

way that it gives a multi dimensional movement possibility just with a simple lean on

the sides or back, without need for complex manual adjusments. The cantilevered

seat offers impact cushioning while seating and synchronises with the back

Workstation movement during posture changes. The ‘S: shaped spines moulded in high strength

Chair glass filled Polyamide and the spine connector moulded in glass filled Polyamide

form the back spine structure involved in multi dimensional recline motion. The

variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature

which is inbuilt in saet base and the tension is user weight dependent. The

adjustable armrests assembly consists of armrest housing sliding over the armrest

structure, both moulded in glass filled Polyamide. The pneumatic height adjustment

shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled

Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch

centre diameter and 76cm with castors. The overall dimensions of the chair shall be

Providing and placing panel & tile based modular manager module, with

partition thickness as 52.4 mm thk and ht - 1200 including powder coated

aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam

tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The

panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb +

3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The

uprights and horizontals shall be made of aluminium extrusion having average wall

Officer Table thickness of 1.2 mm & powder coated with epoxy- polyester powder. Particle

1500 x 750 board framing is used on outer boundary of these blocks as well as

intermediately at certain locations forming conduit for passing cables. These

blocks are located in the mid segment of the panels and can be provided with

cutouts for mounting switch boxes (above or below the worktops). This frame is

bolted to the uprights with M6 screws. Worksurface- out of 25 mm thk prelam

particle board with flat pvc lipping edge banding of size 1500mm x 600mm x 750H.

Side Unit shall have size of 900mm x 450mm x 750mm. Brackets shall be made from

2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front,

free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr =

Size Main table- 1350 x 600 ; Side Unit- 900 x 450 4 68,264.00 273,056.00

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up

of injection moulded glass filled nylon & upholstered using Quilted knitted fabric.

Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25%

compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is

provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360

degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4

position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

4 Officer Chair Each 1 21,896.00 21,896.00

support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two

projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an

adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet

chrome plated and assembled with injection moulded moulded black

polypropylene hub cap. the work shall be carried out as per guidance and

instructions recieved from Engineer Incharge. This shall come along a headrest

assembly consisting of polypropylene pad with lumbr support and covered with

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up

of injection moulded glass filled nylon & upholstered using Quilted knitted fabric.

Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25%

compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is

provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360

degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4

position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber

5 Visitor Chair Each 1 19,320.00 19,320.00

support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two

projecting knobs provided on the rear side of the pad. Lumber pad has an

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an

adjustment stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet

chrome plated and assembled with injection moulded moulded black

polypropylene hub cap. the work shall be carried out as per guidance and

instructions recieved from Engineer Incharge.

Poviding Storage Units. The overall dimensions of it shall be 900 x 450 x 1200mm. It

shall be made from Pre laminated Particle board of 25mmm and 18mm thickness

with 0.8mm thick CRCA metal cladding from outside. Side metal cladding is coated

with Epoxy polyster powder of 50 microns. It shall be provided with 11mm thick bent

metal tops made of 0.8mm thick CRCA. In case of HDU, the doors are made from

Storage 900 18mm thick Pre laminated particle board with decorative laminate on one side and

x 450 x 1200 backing laminate on other. Uniformly distributed load capacity of each shlef is 40 kg

maximum. Back panels are made from 18mm thick PLB. Locking mechanism shall

be 3 way nickel plated woodren furniture lock. Handles shall be of Aluminuium

Overall Dimensions of overhead store units shall be 600 mm W x 328 mm D x 785

mm H . The Construction shall be aesthetically appealing completely knock down

construction made from 0.6 mm thk. CRCA as per IS - 513 . Horizontal stiffener shall

be made from 1.2 mm thk. CRCA as per IS - 513 . The doors shall be made from 18

mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain

particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate

and 0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be

Overhead duly sealed with 2 mm thk. PVC edge banding . Locking shall be 10 lever cam lock

Storage Units lever at the bottom of the door .Shelving shall be Heightwise adjustable shelf 1 no..

The finish shall be Epoxy powder coated to the thickness of 50 microns . The door

shall be 298 mm W x 18 mm D x 783 mm H RH side door with lock 298 mm W x 18

mm D x 783 mm H LH side door w/o lock.

INTERIOR DESIGN WORKS AT ELECTION COMMISSION OF INDIA, NIRVACHAN SADAN, NEW DELHI

SCHEDULE OF QUANTITIES - LIGHTING FITTINGS

S No DSR 2018 TOTAL AMOUNT TOTAL AMOUNT

S No DSR 2018 TOTAL AMOUNT TOTAL AMOUNT

No UNIT QUANTITY RATE DSR (INR) NON-DSR (INR)

LIGHTING FITTINGS

SITC of recessed mounted 1200 mm x 300 mm , 30 W LED light, efficasy more

than 3000 lumens, 110 LPW, CRO more than 80, CCT of 5700 K, suitable for 220 V,

SITC of recessed mounted 10 Watt LED down lighter .

Total Lighting Items 0.00 183057.00

INTERIOR DESIGN WORKS AT ELECTION COMMISSION OF INDIA, NIRVACHAN SADAN, NEW DELHI

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR. NO. SNO. DESCRIPTION UNIT QUANTIT RATE TOTAL TOTAL AMOUNT

DSR. NO. SNO. DESCRIPTION UNIT QUANTIT RATE TOTAL TOTAL AMOUNT

2018 NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point

(without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed PVC conduit, and earthing

the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core

cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

1.5 5 alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core MTR 1355 265.00 359075.00

cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

1.6 6 alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core MTR 50 392.00 19600.00

cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular

1.24 7 plate & switch box including connections but excluding modular plate etc. as

1.24.4 10 3 pin 5/6 amp socket outlet EACH 155 111.00 17205.00

1.24.5 11 6 pin 15/16 amp socket outlet EACH 37 175.00 6475.00

NBCCPage 12 of 30Signature of the Tenderer

Supplying and fixing modular blanking plate on the existing modular plate &

1.26 13 switch box excluding modular plate as required. EACH 50 32.00 1600.00

Supplying and fixing following size/module, GI box along with Modular base &

1.27 14 cover plate on existing modular metal boxes etc. as required.

SUBHEAD TOTALS CARRIED TO SUMMARY 688189.00 0.00

B SUBMAIN & CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

1.14 1 of FRLS PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

SUBHEAD TOTALS CARRIED TO SUMMARY 378240.00 0.00

Supplying and fixing single pole blanking plate in the existing MCB DB

2.11 1 complete etc. as required. EACH 50 8.00 400.00

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

2.10 2 existing MCB DB complete with connections, testing and commissioning etc.

NBCCPage 13 of 30Signature of the Tenderer

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing

2.13 4 MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing following way, vertical type three pole and neutral, sheet

steel, MCB distribution board, 415 volts, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required (but without

MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral),

240 volts, residual current circuit breaker (RCCB), having a sensitivity current

2.14 11 upto 300 milliamperes in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

SUBHEAD TOTALS CARRIED TO SUMMARY 383124.00 0.00

D PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 2 Module Female HD15 (VGA)

MR 1 for pop up box. SET 1 2530.00 2530.00

Supply, installation, testing & Commissioning of 2 Module HDMI socket for pop

Supply, installation, testing & Commissioning of 2 module SOCKET 6A

MR 3 UNIVERSAL for pop up box and floor box. Set 40 270.00 10800.00

Supply, installation, testing & Commissioning of 1 module CAT6 RJ45 Socket for

MR 4 pop up box and floor box. Set 40 677.00 27080.00

Supply, installation, testing & Commissioning of 1 module RJ11 Socket - for pop

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way

MR 6 for pop up box. Set 10 277.00 2770.00

NBCCPage 14 of 30Signature of the Tenderer

Supply, installation, testing & Commissioning of 1 module USB Charger 1000mA

MR 7 - for pop up box. Set 20 1194.00 23880.00

Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor

Supplying and fixing following modular switch / socket on the existing modular

1.24 9 plate & switch box including connections but excluding modular plate etc. as

1.24.6 10 Telephone socket outlet Set 126 119.00 14994.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper

1.18.2 11 conductor, unarmoured telephone cable in the existing surface / recessed

steel / PVC conduit as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI)

Raceways along with required suitable number of GI couplers for joining

MR 15 raceways and fixing GI brackets and all accessories complete in all respect

as per the directions of engineer in charge

(a) 16 300mm x 38mm(GI) - 3 compartment MTR 10 2956.00 29560.00

(b) 17 225mm x 38mm(GI) - 3 compartment MTR 60 2456.00 147360.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct

access to cables at the intersection of raceways supplied completely with

base and cover plates, height adjustable junction box 65- 90 mm including all

accessories complete in all respect as per the directions of engineer i

Supplying and fixing of following sizes medium class PVC conduit aong with

1.21 24 accessories in surface/ recess including cutting the wall and making good the

same incase of recessed conduit as required

NBCCPage 15 of 30Signature of the Tenderer

SUBHEAD TOTALS CARRIED TO SUMMARY 75294.00 1069724.00

NBCCPage 16 of 30Signature of the Tenderer

INTERIOR DESIGN WORKS AT ELECTION COMMISSION OF INDIA, NIRVACHAN SADAN, NEW DELHI

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR 2018/ Rate DSR Amount Non-DSR Amount

S No Description of Item Unit Qty

PASSIVE - Structured Cabling

Supply , Installtion , Testing and comissioning of CAT 6

UTP cable solid copper .

Supply , Installtion , Testing and Comissioning of CAT6

M.R. 2 information outlet (I/O) for Data, Voice & Wi-Fi Field end Nos. 100 258.00 25,800.00

Supply, Installation, Testing and Comissioning of loaded

M.R. 3 24 port CAT 6 jack panel for CAT6 cable termination Nos. 1 10,948.00 10,948.00

Supply, Installation, Testing and Comissioning of CAT 6

patch cord 7 feet for rack side switch termination for

Supply, Installation, Testing and comissioning of CAT 6

patch cord 7 feet for user termination to information

Supply, Installation, Testing and comissioning of 15U wall

mount rack with fans, 2 cable managers, stationary shelf,

2 Nos of hardware pkts.

Supply, Installation, Testing & Commissioning of 24 Port

POE Access Switches with switching capaticy of 128

Gbps, forwarding performance 95 Mpps, having 24 x

10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE

M.R. 7 budget of 370W and 4x 10G SFP+ uplink ports . Should Nos. 1 122,360.00 122,360.00

support min 2GB internal DRAM, 2GB internal Flash

memory,32K MAC address, 1K IPv6 Multicast Routes,

Should have static Routes from day 1.One year support.

Approved Make : CISCO or approved equvilent

Supply, Installation, Testing & Commissioning of 24 Port

Access Switches with switching capaticy of 128 Gbps,

forwarding performance 95 Mpps, having 24 x

10/100/1000BASE-T PoE-plus(RJ45) and 4x 10G SFP+ uplink

ports . Should support min 2GB internal DRAM, 2GB

M.R. 8 internal Flash memory,32K MAC address, 1K IPv6 Nos. 1 96,600.00 96,600.00

Multicast Routes, Should have static Routes from day

1.One year support.

Approved Make : CISCO or approved equvilent

Supply, Installation, testing and commissioning of Video

Conferenece system (Hardware / Software based)

Codec / CPU (I7 9th Gen Processor, 16GB DDR4, 128GB

Flash Drive Size not bigger than 8" x 8" x 1.5". The device

should be supplied with necessary Video Conference

software), device should have a Camera system, One

touch Join conference system functionaity, One

concurrent session should support at least 70 participants

in a single call expandable to 150 participants, should

be possible to share content while doing a video

conference, should be able to run on devices such as

MR 9 Desktops / Laptops / Tabs / Mobile Phones (It must Nos. 1 773,662.50 773,662.50

support latest versions of Windows, IOS, Android, Linux

etc.), possible to record the meeting, One touch dial

facility should be available to scheduled calls, FHD

camera with 30X zoom from samec OEM etc complete

required as per specifications. Approved make - CISCO

or approved equvilent

Supplying and laying HDMI Cable with connector on

MR 10 both ends. Meter 20 699.66 13,993.20

OFFICE FOR MCA AT KOTA HOUSE

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 216423.29

B WATER SUPPLY 36777.50 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 63185.65 0.00

Total Cost ( Carried Forward) in Rs. 316386.44

OFFICE FOR MCA AT KOTA HOUSE, NEW DELHI

BOQ FOR PLUMBING & FIRE FIGHTING

SUB AEAD A: SANITARY FIXTURES & FITTINGS

NS Rate NS Amount DSR -

SL. NO. DESCRIPTION OF ITEMS UNIT Qty Rate Amount

1.1 Providing & fixing glazed vitreous china single trap

syphonic pattern having back inlet ,supporting chair ,wall

hung water closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European

type) water closet with seat and lid, with C.P. brass hinges

and rubber buffers, adapter, rubber joints fixed to W.C.,

C.P. brass screwed washers including cutting and making

good the walls and floors wherever required and HDPE wc

pan connector including jointing with white cement

coomplete in all respects

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I Each 2 20,972.76 41945.51 NS

1.2 Providing & fixing glazed vitreous china wash basin with

R.S. or C.I. brackets painted white, 32mm C.P. brass waste

of standard pattern , C.P brass wall flange 32 mm dia. C.P.

brass bottle trap and union 32 mm dia C.P. pipes to wall

flange. complete including cutting and making good the

walls wherever required.

Undercounter wash basin (White colour)of size: 585x430

1.4 Providing & fixing 15mm C.P. brass single hole wash basin

mixer without popup waste system with 450mm long

copper pipes and brass nut Each 2 4,109.26 8218.52 NS

1.5 Providing & fixing vitreous chinaware urinal comprising of

large flat back wall hung urinal in glazed vitreous China

new magnum urinal NS

15 mm electrically operated solenoid valve with infra red

sensor mounted in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve

to urinal terminated with a 15 mm screwed spreader

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension

pipe rubber adopter for waste connection, CP brass wall

1.8 Providing & fixing toilet paper holding including cutting

and making good the walls. Each 2 1,816.51 3633.02 NS

1.9 Providing & fixing Horizontal liquid soap dispenser with

stainless steel lid and brackets fixed to wooden cleats with

C.P. brass screws. 3,674.83 7349.67 NS

1.10 Providing & fixing C.P. brass coat hooks fixed on toilet door

with C.P. brass screws Each 2 633.49 1266.97 NS

1.11 Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick

marine ply sheet ground fixed to wooden cleats with CP

brass screws and washerswith 40 mm wide teak wood

frame as per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm

dia, 1M long PVC tube and wall hook CP brass wall flange Each 14 1,784.37 24981.21 NS

1.13 Providing & fixing, testing and commissioning of storage

type electric water heater with automatic thermostatic

control electric element, pressure release valve, brackets

fixed to expansion fasteners with M.S. nuts and bolts all

complete including cutting and making good the walls

wherever required.

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

1.15 Providing & fixing wall mounted 25 mm dia Stainless steel

coated grab bar including cutting & making good the

walls(size 450mm long) 1,056.30 2112.59 NS

1.16 Providing & fixing 15 mm dia C.P. brass bib cock with Hose

union of approved quality. Each 2 1,334.63 2669.25 NS

1.17 Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality. Each 2 1,633.11 3266.21 NS

1.18 FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and

'C' size battery (2 Nos) for operation fixed to wooden cleats

with CP brass screws

1.19 Providing and fixing of stainless steel finish Paper Towel

Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws 5,452.66 10905.33 NS

i. Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures

shall be selected by Architect/Interior designer/Project

manager and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type

of sanitary fixtures.

iii. Contractor to receive all the above mentioned items &

store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 216423.29

SUB HEAD B: WATER SUPPLY

DSR DSR NS DSR -

DESCRIPTION OF ITEMS UNIT Qty Rate Amount Amoun 2018/N

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all (CPVC) plain & brass threaded fittings

including fixing the pipe with clamps at 1.00 m spacing.

This including jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as

per direction of engineer in charge. .

Internal Work - Exposed on Wall

20 mm nominal outer dia pipes. Metre 15.00 306.95 4604.25 18.7.2

25 mm nominal outer dia pipes. Metre 15.00 369.20 5538.00 18.7.3

32 mm nominal outer dia pipes. Metre 10.00 480.55 4805.50 18.7.4

40 mm nominal outer dia pipes. Metre 10.00 648.60 6486.00 18.7.5

50 mm nominal outer dia pipes. Metre 5.00 900.35 4501.75 18.7.6

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c

fixing the pipe with clamps at 1.00 m spacing. This

including jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and

making good the the same including testing of joints

complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making

good the walls etc.

20 mm nominal outer dia pipes. Metre 10.00 478.15 4781.50 18.8.2

Providing and fixing brass stop cock of approved quality

3 complete. 18.16

15 mm nominal bore Each 2.00 302.55 605.10 18.16.1

20 mm nominal bore Each 2.00 326.45 652.90 18.16.2

Providing and fixing gun metal gate valve with C.I.

4 wheel of approved quality (screwed end): 18.17

25 mm nominal bore Each 2.00 497.15 994.30 18.17.1

32 mm nominal bore Each 2.00 581.25 1162.50 18.17.2

40 mm nominal bore Each 2.00 678.40 1356.80 18.17.3

Providing and fixing C.P. bass angle valve for basin mixer

and geyser points of approved quality conforming to

I.S:8931 a) 15 mm nominal bore. 18.53

15 mm nominal bore Each 2.00 532.00 1064.00 18.53.1

Providing and fixing unplasticised P.V.C connection pipe

with PTMT Nuts coller and bush of approved quality and

15mm nominal bore with 45cm length Each 2.00 112.45 224.90 18.74.2

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 36777.50

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Rate NS Rate DSR Amount NS Amount DSR -

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design

with cast iron screwed down or hinged grating with or

without vent arm complete, including cost of cutting and

making good the walls and floors.

100 mm inlet and 100 mm outlet centrifugally cast (spun)

2 Providing and fixing soil, waste and vent pipes. 17.35

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

100mm dia cast (spun) iron S&S pipe

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

75mm dia cast (spun) iron S&S pipe

Providing and fixing single equal plain junction of reqd.

degree with access door, insertion rubber washer 3mm

thick, bolts and nuts complete. 17.43

Sand cast (spun) iron pipe IS-3989 Each 2 722.55 1,445.10 17.43.1.2

Sand cast (spun) iron pipe IS-3989 Each 2 549.35 1,098.70 17.43.2.2

Providing and fixing single equal plain junction of reqd.

4 degree. 17.44

Sand cast (spun) iron pipe IS-3989 Each 2 667.70 1,335.40 17.44.1.2

Sand cast (spun) iron pipe IS-3989 Each 2 470.40 940.80 17.44.2.2

Providing and fixing bend of required degree with access

door, insertion rubber washer 3mm thick, bolts and nuts

complete. 17.38

Sand cast (spun) iron pipe S&S as per IS 3989. Each 2 461.65 923.30 17.38.1.2

Sand cast (spun) iron pipe S&S as per IS 3989. Each 2 384.75 769.50 17.38.2.2

6 Providing and fixing bend of required degree . 17.39

Sand cast (spun) iron pipe S&S as per IS 3989. Each 2 390.75 781.50 17.39.1.2

Sand cast (spun) iron pipe S&S as per IS 3989. Each 2 289.75 579.50 17.39.2.2

7 Providing and fixing collar. 17.57

Sand cast (spun) iron pipe S&S IS-3989 Each 2 409.45 818.90 17.57.1.2

Sand cast (spun) iron pipe S&S IS-3989 Each 2 256.30 512.60 17.57.2.2

Providing and fixing MS holder bat clamps of approved

design to cast iron (spun) pipe embedded in and Including

cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size) including cost of cutting holes and making

good the walls etc.

For 75mm dia. Pipe Each 2 283.40 566.80 17.37.2

Providing and laying cement concrete 1:5:10 (1 cement: 5

coarse sand: 10 graded stone aggregate 40 mm nominal

size) alround SW including bed concrete as per standard

Providing and fixing G.I. Pipes complete with G.I. Fittings

and clamps. including cutting and making good the walls

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Painting G.I. Pipes and fittings with two coats of

11 anticorrosive bitumastic paint of approved quality 18.40

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Painting sand cast iron / centrifugally cast iron( spun) iron

soil, waste and vent pipes and fittings with paint of any

colour such as chocolate, grey or buff etc. over a coat of

primer (of approval quality) for new work

100mm dia cast (spun) iron S&S pipe

75mm dia cast (spun) iron S&S pipe

Providing lead caulked joints to sand cast iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry &

cement mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

Providing and fixing single unequal plain junction of reqd.

15 degree. 17.48

Sand cast (spun) iron pipe IS-3989 Each 2 798.80 1,597.60 17.48.1.2

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 63185.65 0.00