Special repair to MBBS Girls Hostel at Blessington Estate Lakkar Bazar(SH- Dismantling work CC 1.4.8 1.2.4 tiles work Kota Stone water proofing and WS and SI fittings in Block-A basement floor and Ground floor to Third floor).

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads as per direction of Engineer - in charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead. For thickness of tiles 10 mm to 25 mm

Dismantling Kota Stone in floors and roofs laid in cement mortar including stacking material within all lead. For thickness of tiles 25 mm to 40 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads and lifts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement in 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts

Providing and laying double charged Matt Finished vitrified tiles 600mm x 600mm and 10 mm thick (or as per manufactu)rer of approved shade and brand (SONAMI/ORIENT) with granite border in flooring treads etc. in cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads and lifts.

Providing and laying double charged Matt Finished vitrified tiles 300mm x 450mm and 10 mm thick (or as per manufactu)rer of approved shade and brand (SONAMI/ORIENT) with granite border in Skirtings, Risers of steps etc. in cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads and lifts.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. one coat including carriage of materials within all leads and lifts

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work of approved brand and manufacture including carriage of materials within all leads and lifts

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). including carriage of materials within all leads and lifts

Providing and fixing Hindware or equivalent vitreous China wash down, water closet squatting pan white colour (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately).Orissa Pattern including carriage of material within all leads and lifts.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia including carriage of materials within all leads and lifts

Providing and fixing CP grating of approved quality and colour Circular type 100 mm nominal dia including carriage of materials within all leads and lifts

Providing and Fixing 600X 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts

Providing and fixing CP brass soap Dish complete. including carriage of materials within all leads and lifts

Providing and fixing CP 600 mm long towel rail with total length of 645 mm, width 78 mm . including carriage of materials within all leads and lifts

Providing and fixing CP towel ring with CP screw complete. including carriage of materials within all leads and lifts

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall (i) 20 mm nominal outer dia Pipes

Providing and fixing on wall face PVC Finolex type-B spigot,socket, waste and ventilating pipes of working pressure not less than 4.5 kg/sqm including coller and filling the joints with approved adhesive complete including carriage of materials within all leads and lifts(i) 150mm Dia

(ii) 110mm Dia

Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.(i) 150mm Dia

(ii) 110mm Dia

Providing and fixing PVC Finolex single equal branch (a) with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.(i) 150mm Dia

Providing and fixing PVC Finolex single equal branch complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.(i) 110mm Dia

Providing and fixing PVC Finolex plain bend ISI marked complete including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts.(i) 150mm Dia

(ii) 110mm Dia

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of materials within all leads and lifts.(i) 15 mm nominal bore with 30 cm length

(ii) 15 mm nominal bore with 45 cm length

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts :-110 mm X 90 mm.

Supplying and application of EPOXY Grouting for addressing crack areas in brick walls including surface cleaning enough to assert the exact location of source of problem by fixing Mechanical packers 100mmX 10mm size with spacing of 150mm in radious or closer as per severity of problem into the crack walls as per manufacturer instructions including hole drilling and clreaning of drilled hole prior to fixing packers and sealing crack by using Epoxy Putty (DEP-009) and fixing the pedestals for injectors and inserting Epoxy Mix DEL-090 (1.50 Kg) in ratio of 2:1 (2 Resins : 1Hardner) through injectors provided by manufacturer as per direction of Engineer in Charge complete including carriage of materials within all leads and lifts.

Supplying and application of EPOXY Grouting for addressing crack areas in brick walls including surface cleaning enough to assert the exact location of source of problem by fixing Mechanical packers 100mmX 10mm size with spacing of 150mm in radious or closer as per severity of problem into the crack walls as per manufacturer instructions including hole drilling and clreaning of drilled hole prior to fixing packers and sealing crack by using Epoxy Putty (DEP-009) and fixing the pedestals for injectors and inserting Epoxy Mix DEL-090 (3Kg) in ratio of 2:1 (2 Resins : 1Hardner) through injectors provided by manufacturer as per direction of Engineer in Charge complete including carriage of materials within all leads and lifts.

ASHOK KUMAR