GE (N) P/TOKEN- 54 OF 2021-2022 REPAIRS TO COMPOUND WALL, FENCING, GATES, DRAINS AND MISC ITEMS IN THE AREA OF PG ROAD, KOHIMA LINE, ARJUN MARG, RS ROAD , MM ROAD AND MISC AREA AND MISC CIVIL WORKS UNDER AGE B/R (C) OF GE (NORTH) PUNE.

Amount

Excavating in post holes in hard/ dense soil n.exe 0.5 cum getting out for inserting post etc and removing surplus soil to a distance n.exe 50m and making good surface.

Excavation in trenches n.exc 1.50m wide & n.exc 1.50m in depth in foundation in hard/ dense soil for diversion of drain and boundary wall, hume pipe etc all as directed

M&L PCC (1:3:6) type C-2-using 40mm graded stone aggregate as in fdn filling and mass concrete complete all as specified.

Removing excavated soil/material to a distance n.exe 50m depositing where directed n. exe 1.5 m above the starting point.

Returning filling in including spreding lavelling, watering and well ramming in layers n.exc 50cm in soil etc complete.

Surface dressing for removing bushes, site clearance for making approacheds to repair bounday wall and drain .Removing vegetation , cutting berms to provide proper slope etc complete.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thick above or below ground level complete all as specified and directed.

Dismantling / taking down fencing wire mesh any type & size etc complete.

Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails,straining bolts etc, including provision of binding wire complete all as specified and as directed.

Supply only chainlink fencing including line wires mesh any size and type as reqd.at site any type of standards,rails,straining bolts etc, including provision of binding wire complete all as specified and as directed.

M&L for Mild steel work for posts, struts in fencingincluding cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 ,complete all as specified and directed

S&F in repair mild steel screw bolts(machine made)with hexagonal or square heads at one end and screwed the other ,or screwed both ends ,each screwed end to be fitted with two washers and one hexagonal square square nut,bolts not exc 10cm long,11 to 15 mm dia complete all as specified and directed.

M&L for Mild steel fabricated work for posts, struts & Gate including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 ,complete all as specified and directed

Dismantling of structural steel work of any description

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

S&F in repair galvenised 2 strands,steel barbed wire with 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standared rails bolts, including securing or tying st crossing with and provision of galvanised mild steel wire,stales or steel pins etc,complete all as specified and as directed.

- Ditto-all as per item No. 17 above but fixing only complete all as specified.

Preparation of new steel surfaces of any description and in any position exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Preparation of old steel surfaces of any description and in any position exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old steel surfaces of any description and in any position exceeding 10cm width or girth and applying one coat of Aluminium paint complete all as specified and directed.

Material and labour for 60 mm thick, machine made precast cement concrete interlocking paver blocks / tiles M-40 (Grade of concrete), of triangular / Zigzag / Haxagone/ I , in shape or shape and designe as approved, with grey cement and pigment and conforming to IS 15658-2006, laid over and including a layer of 25 mm thick sand cushion including filling the joints with sand as in floors/ paths/ pavings etc. complete all as specified and directed.

M&L for chequered cement concrete glazed tiles rubber moulded of size 30cmx30cmx25mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over and including 20 mm thick screed bed in CM (1:6)

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in sub base for floor, finished even and rough complete all as specified and directed.

M&L precast cement concrete PCC 1:3:6 type C-1 using 20mm graded stone aggt as in kerb stones of size 400x100x300mm finished fair, jointed and set in CM (1:6) including necessary form work complete all as spd and directed.

M&L Preparation of concrete /curb stone surfaces of any description and in any position exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.

- Ditto- all as per item no.27 above but except bricks complete all as specified and directed.

M & L for precast solid cement concrete block masonry exceeding 10 cm width set in cement mortar 1:6 type C1 1:3:6 (using 20 mm graded aggregates) complete all as specified and as directed.

- Ditto- all as per item No 29 above but except blocks

M & L for walling of rubble ,squared,rectangular coursed ,well bounded, solidely hearted, built masonry set in cement mortar 1:6 complete all as specified and as directed.

Ditto all as per item No 31 above but except stone

Demolition of cement concrete block masonary/ fly ash bricks/ stone masonry built in cement mortar of any description and in any position.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar (1:6 ) & finished even and smooth without using extra cement complete all as specified

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar (1:4 ) finished even and smooth without using extra cement including WPC. complete all as specified

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for preparation of newly plastered sufaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of old painted plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed

M&L for preparation of newly plastered sufaces of walls and applying two coat of white wash complete all as specified and directed.

Supply and fix for 50mm thick 600X450mm, heavy duty, factory made manhole covers without additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair including demolition of existing reinforced cement concrete complete all as specified and as directed.

Supply and fix for 50 mm thick, 600X600mm, heavy duty, factory made precast as in manhole covers with additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed.

M & L for precast reinforced cement concrete type B-1, 1:2:4, using 20mm graded stone aggregates as in man hole covers/septic tanks including formwork/moulds and set in cement mortar 1:4 all as specified and as directed. Note :- Reinforcement shall be measured seperately.

Demolition of reinforced cement concrete of cover slab of septic tank, manhole covers etc complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix ) type A-1, 1:2:4 using 20mm graded stone aggregates as in cover slabs of septic tanks all as specified and as directed.

Use and waste of formwork to soffits & edges of cover slabs of septic tanks and similar work not exceeding 200 mm thick for fair finished flat surfaces of concrete all as specified and as directed.

M&L RCC (1:2:4) type B1 using 20 mm graded aggregate as in lintels/coping over 1.5 m span etc inluding weathring slightly rounded or chamferred angles complete all as specified and directed. Note: Reinforcement shall be measured separately.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding steel wire (annealed) not less than 0.9mm dia.

M&L for TMT bars 6 to 8mm dia cut to length bent to shape required, including cranking, bending hooking etc & binding with and including mild steel binding steel wire (annealed) not less than 0.9mm dia.

M&L precast jalli / louvers 30 mm thick set in CM 1:4 of PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate including necessary all moulding,form work complete all as specified and directed

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping ,benching etc, weathering slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed

M&L for preparation of surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor decorative arches & decorative stone faced wall of different shade etc, on heritage buildings complete all as specified and as directed by Engineer-in-charge. NOTE: The height in old vintage/ heritage buildings is upto 15 Mtr.

Preparation of surfaces by washing rubbing, removing all dirt / dust by washing etc. Applying for two coats of Latex acrylic stacco paint (Royal play stacco make Asian ) over stone faced wall on heritage buildings complete all as specified and as directed by Engineer-in-charge. (NOTE: The height of old vintage/ heritage buildings is upto 15 Mtr.)

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable asbestos cement (Corrugated, Semi corrugated etc.) sheets all as specified and as directed.

Supply and fix for 1.00mm thick mild steel plain black sheet as in wall cladding, steel gates and similar work cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc. as required complete all as specified and as directed.

Supply and fix in repair for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

M&L for coloured tiles 400mmx400mmx 8 to 10mm thick of make "Johnson Endura" or equivalent make of kajaria/nitco as approved by GE, laid over and including 20mm thick screed bed in cement mortar 1:4, joints grouted and pointed with matching coloured cement including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for coloured Wall clading tiles 600mmx300mmx8 to 10mm thick of make "Johnson /kajaria/Nitco" as approved by GE, laid over and including 10mm thick screed bed in cement mortar 1:4, joints grouted and pointed with matching coloured cement including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length (total length 90 m),having 50 nos round per 6 metre length, up to 3 m height of wall with existing angle iron „Y‟ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R. B. T. reinforced barbed wire, stud tied with G. I. staples and G. I. clips to retain horizontal, including necessary bolts or G. I.barbed wire tied to angle iron, all complete as per direction or Engineer-in-charge, with reinforced barbed tape (R.B.T.)/ Spring core (2.5 mm thick) wire of high tensile strength of 165kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle,C.C. blocks shall be paid separately)

M&L for flush pointing in CM 1:4 on concrete block masonary surface including racking out joints completeall as spd

M&L , PCC 1:3:6, type C-1 using 20mm graded stone aggregates as in surface channel and drain complete all as spd and directed

M&L Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cemen, including forms, moulds, mitred/stopped ends etc complete all as spd and directed.

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting uot inhard/dence soil etc complete all as spd and directed.

M&L Reinforced concrete pipes 750mm bore, class NP2, laid and jointed complete with collars complete all as specified and as directed

M&L Reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars complete all as specified and as directed

M&L for removing old synthetic enamel paint from wooden members such as railing/door/window etc by burning or other means, cleaning the surfaces wih sand paper, applying two or more coat of melamine finish over a coat of primer and putty complete all as specified and as directed

M&L for Brick finish texture having total thickness of 2mm with stamping, colour as approved complete all as specified and as per manufacturer's instructions:- 1. First coat of COARCE material (Base coat- Groove colour) applied by steel trowel with thickness of 1mm. 2. Second coat of FINE material (Top coat- pigmented) applied by trowel of 1mm. 3. Third coat of protective water repellant coat clear lacquer coat by roller. NOTE : - The work shall be carried out upto all heights & all floor levels and per directions of the Engr-in -Charge. Make :- Instakrete coating LLP, Pune or equivalent as approved by GE.

Providing and laying of Insta- Stonecrete flooring gray cement based, existing levelled and cured concrete PCC with the natural colour aggregate of 8mm to 12mm and Total thickness of flooring is 20mm etc complete.

Forming Groove of uniform size from 8mm in flooring surface as per approved pattern using Aluminium battens/wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of plaster panel & finishing the groove complete as per specification & direction of the Engr-in-Charge

M&L for polycarbonate hallow sheet series 10mm thick for raising of wall height, make :- PC LITE or eqivalent as approved by GE, complete all as specified and as directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed

M&L for preparation of old wall surfaces and applying one coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) to mangalore tiles, roof, parapet, wall ,floor decorative arches & decorative stone faced wall of different shade etc, on heritage buildings complete all as specified and as directed by Engineer-in-charge. NOTE: The height in old vintage/ heritage buildings is upto 15 Mtr.

Material and labour in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 150mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Material and labour in repair for 200mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition and breaking up 200mm bore dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 150mm and not exceeding 200mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning/clearing & Maintanance of sewage lines including CI/PVC stacks, incl under ground sewage lines any depth by removing any type of blockage from sewage drain exceeding 200mm and not exceeding 300mm bore/ dia by rodding or any other means from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehical and cost of same shall be deemed to be included in the rate quoted by the contractor.

Cleaning of blocked WC/gully trap/ Floor trap, upto and including first manhole by manual labour as well flushing with clean water making the WC seat , gully trap, floor trap operational complete all as specified and directed by Enge-in-Charge

Taking out semi solid, liquid suspension sludge and foreign material from man hole/ septic tanks/ soakage well of any description and any depth including sucking/ pumping of water with pump set and removing and refixing of acessories and appliances required for safe disposal of sludge and foreign materials either by carrying the same in covered van or trolley at out side MOD land and burring the same (semi solid/ liquid shall not be burried) in ground complete all as directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself).

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

L.T Associate

J P ASSOCIATES