Ulundurpet Mortuary block - Internal and External Electrification

Amount

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of 7 W LED for BH point.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with double side connection ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Twin box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 2 Nos 18 W LED tube light with double side connection. ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Twin box type 4' 18 W LED fitting complete with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with fluorescent Tubes

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete without provision of holes in the wall

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End.

Supply and fixing of 25 A flush type wall socket with 25 A DP MCB in suitable sheet steel enclosure like Havells / equivalent in flush with wall with earth connection.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of Vertical type 6 way triple pole netural MCB distribution board double door type with 63 A 4 pole MCB isolator as incoming , 18 Nos 6 A to 32 A as outgoing inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be Like Hager / Legrand / equivalent.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 ½ x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 3 ½ x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

Supply, erection, testing, commissioning and handing over of 6 bodies Mortuary Cabinet (Containing 6 Bodies ) Mortuary Cabinet Type as detailed Below (A) Supply, fabrication and erection of one number PUF insulated cabinet type mortuary like Blue Star model No .BMC 610 or equivalent to hold 6 bodies in 2-tier arrangement with as per the following specification and provisions 1) External cabinet dimensions of 9.7 feet (w) x 7.7feet (D) x 5.7 feet (H) suitable for bodies cabinet with panel thickness not less than 60mm. 2) Insulation with 60mm thick PUF panel with 35 to 40 KG/cumt. 3) Panel finish 0.5mm thick stainless steel with in the front side outer and other outer inner areas with 0.5mm thick pre-painted galvanized steel. (A) Supply, fabrication and erection of one number PUF insulated cabinet type mortuary like Blue Star model No .BMC 610 or equivalent to hold 6 bodies in 2-tier arrangement with as per the following specification and provisions 1) External cabinet dimensions of 9.7 feet (w) x 7.7feet (D) x 5.7 feet (H) suitable for bodies cabinet with panel thickness not less than 60mm. 2) Insulation with 60mm thick PUF panel with 35 to 40 KG/cumt. 3) Panel finish 0.5mm thick stainless steel with in the front side outer and other outer inner areas with 0.5mm thick pre-painted galvanized steel.

4) Individual doors for each body with chrome plated hinges and locks. 5) All panels to be joined together by means of tongue and groove and locked together by means of cam locks on each side to ensure air tightness, foamed in PVC bubble gasket in all panels. 6) Edge of the doors and door openings to be finished with PVC lining 7) Electronic temperature, indicator cum controller, vapor proof in can-descent light fixture with lamp with plastic coated globe. B) Supply, fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2 deg C to +6 deg C inside the 6 body Mortuary cabinet with the following specifications of capacity not less than 10000 BTU/HR Constructed of G.I.Panels with compressor of make Kirloskar Cope land/equivalent with condenser with condenser coil, evaporator with evaporator fan motor with suction, discharge and liquid refrigerant piping and expansion device etc., complete like Blue Star Model No. BMC 610 or equivalent, Operating on with power supply at 230V+/-10%/single phase/50Hz AC supply. C) Supply, fabrication and erection of 6 Nos, of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 120kgs of weight when it is stretched fully out. D) Supply, fabrication and fixing of 6 numbers of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet. E) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room. 9) Including Packing and Forwarding Charges.

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Erection of the High Mast by Providing Concreting 1:2:4mix R.C.C masonry foundation pedestal. The RCC Pedestal projection should be 30cms above the ground level, The Switch feeder box should also be mounted in RCC pedestal with projection of 30cms above the ground level suitable to the safe bearing capacity of the soil at 12T/ M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor Plate. Template etc: complete as per standard specification of IS-875-1987

Supply and fixing of 6 Nos 150 Watts LED flood Light fitting with control switch gears, specially Heavy type water proof Dust proof integral Luminaries in the existing pole

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection

Supply and fixing of 32A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection The FP MCB & Enclosure should be of Legrand / Hager make

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

KVR Electrical Contractor

SKN Electrical works