REPAIRS TO BRICK WORK, JOINERY, PAINTING WORK, ROOFING, PATHWAYS, HARSTANDING, WALLS, DRAINS, FENCING, SEWAGE CLEANING AND OTHER MISC REPAIRS IN RR UNITS UNDER AGE (I) BHALRA

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside Cantt area all as specified and directed by Engineer-in-Charge.

S&F non skid ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry over and including 15mm thick screed bed in CM (1:4) jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed by Engineer-in-Charge.

S &F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:4) jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified Ceramic Coloured light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed CM1:4 all as specified and directed by Engineer-in-Charge.

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick plaster in CM (1:3) and pointed in white or colour cement to match all as specified and directed by Engineer-in-Charge.

M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab 20 mm screed bedin 1:3, including rubbing and polishing complete.

Taking down cement or cement lime plaster of any description on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including corrices by washing, rubbing down and stopping of distempered and painted surfaces smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, and applying one coats of cement base paint all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered surfaces of walls including corrices by washing ,rubbing down and stopping of distempered surfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete any description (unreinforced) in ground floors and pavings not exceeding 15 cm in thickness all (below or above ground level) as specified and directed by Engineer-in-Charge.

M&L 75mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays finished even and smooth without using extra cement incl form work complete all as specified and directed by Engineer-in-Charge.

M&L 40mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors and finishing surface even and smooth without using extra cement all all as specified and directed by Engineer-in-Charg.

S&F Width of strip 38mm and 3 mm thick Glass dividing strips inserted in position , conform to design all as specified and directed by Engineer-in-Charg.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hardstanding, path etc including finishing rough surface without using extra cement and laid in alternate bays all as specified and directed by Engineer-in-Charg.

Forming contraction joints 100mm deep X 10mm wide , filled with sealing compound Grade B.

Dismantling of cement concrete/interlocking floor tiles including cement mortar bedding (but not backing), removing rubbish off the premises outside Cantt area all as specified and directed by Engineer-in-Charge.

M&L Chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors including over 20 mm screed bed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed by Engineer-in-Charge.

M&L 25mm thick sand cushioing for interlocking tiles including watering and consolidation all as specified and directed by Engineer-in-Charge.

M&L cement concrete 1:3:6, type C-1 using 20mm graded stone (machanical crushed ) as in surface channel and drains complete all as specified and directed by Engineer-in-Charge.

M&L for forming fair finished drain or channel 60cm inner girth in cement concrete, using extra cement including forms moulds, mitred/stopped ends etc complete all as specified.

Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM1:6

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings, ridges, hips , valleys and flashings complete all as specified and directed by Engineer-in-Charge.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of Zinc coating 275, fixed with L type or J type or cranked hook bolts in lieu of screw of sheet, shall be laid with minimum end lap of 150 mm and side lap of two corrugation as indicated complete all as specified.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valleys gutters, drip and straight flashings with grade of Zinc coating 275, incl materials to complete the work all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets including removal of Debries outside Cantt area complete all as specified and directed.

M&L for 4mm thick non asbestos fiber cement building boards as in false ceiling fixed to aluminium snap grid frame work size 605 x 605mm with using 36.5mm x 23.5mm x 1.5mm thick main tee, 23.5x23.5x1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, in repairs complete all as specified and directed.

S&F PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm,

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion by demolation of cement concrete or any type of work all as specified.

M&L for PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation, filling and mass concrete.

S&F for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, in rapair complete all as specified and directed.

Fixing only for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, complete all as specified and directed.

Dismantling security fencing wire any type (babed wire, chainling fencing, GI mesh etc) all as specified and directed.

S&F 3.15mm dia wire chain link fencing of mesh size 50mmx50mm, galvanised steel wire, conforming to IS : 2721-2003 including line wires, straining bolts, binding wire etc, in repairs, complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete(Fe-410W(GdeE-250) quality) complete all as specified and directed by Engr In Charge.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each all as specifed and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.

S&F factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, suppling & fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and as directed by the Engineer-in-Charge.

S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S & F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S&F for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd Class hand wood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

M&L for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebatesincluding joining cleates for fixing etc. complete all as specified.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. coplete all as specified.

Supply and fixing 4.8 mm thick ordianary quality sheet glass exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed by Engineer-in-Charge.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

S&F Door closer hydraulically regulated Aluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed.

S&F in repairs Door closer hydraulically regulated Alluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed.

S&F Butt hinges of size 100mm length, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type C-21

S&F Alluminium, anodized, barrel tower bolts 150mm extruded section.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts,four on bolt type and two on staple plate 250 mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing floor door stopper 150mm length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge.

S&F Mortice lock as in repairs , fancy type, 4 levers, verticle type, brass body, size 100 mm, all as specified and directed by Engineer-in-Charge.

S&F in repairs 3 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square n exc 0.5 sq.m in each pane, including hacking out old glass of any description complete all as specified and as directed by the Engineer-in-Charge.

S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square exc 0.5 sq.m in each pane including hacking out old glass of any description complete all as specified and as directed by the Engineer-in-Charge.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire complete all as specified and directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 125mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified.

S&F in repairs 150mm size aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified.

S&F in repairs 100mm size of butt hinges, medium weight cold rolled mild steel etc complete all as specified.

S&F in repairs 125mm size extruded aluminium alloy handles fabricated type complete all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with rubber shoe 150mm long complete all as specified and directed.

S & F in repairs aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts,four on bolt type and two on staple plate 250 mm long complete all as specified and directed by Engineer-in-Charge.

S&F 1000 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I, including dismantling complete all as specified and as directed by the Engineer-in-Charge.

S&F 500 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I, including dismantling complete all as specified and as directed by the Engineer-in-Charge.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F medium grade 15mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors including taking down complete all as specified and directed by Engineer-in-Charge.

S&F medium grade 20mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors including taking down complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed

S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed

S&F in repairs CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed.

S&F in repair CP angle or plain stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair 15mm bore Pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or with out lettred Hot or Cold with long screwed shanks and flynuts ,screwed for pipes and fixing all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and directed.

S&F in repairs waste coupling of PTMT 32mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs waste coupling of PTMT 32mm bore suitable for urinal, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Health faucet ABC body with 1 mtr SS braided connection pipe (Make: CERA / JAQUAR / COHLER) all as specified and directed by Engineer-in-Charge.

S&F wall mixer with telephonic shower arrangement (Cera cat part No: F3001404) with flanges, for mixing Hot & Cold water screwed down for iron pipe of 15mm bore, fixed in repairs complete all as specified and directed.

S&F in repairs Ocean Central hole wash basin mixer (Make - CERA Cat Part No F-3001461) complete all as specified and directed.

S&F in repairs Ocean sink mixer wall mounted (Make- CERA / JAQUAR / KOHLER) complete all as specified and directed.

S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed.

S&F in repairs Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.

S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Wash down water closet (Pedestal pattern), complete , incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-Charge.

S&F One piece EWC"S" with slim seat cover & fittings (Make : CERA cat Part No S-1013164) all as specified.

S&F in repairs Vitreous China urinal half stall type, white complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 32mm bore PVC flexible waste pipe for WHB complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PTMT grating (round) 140 mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S&F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.

M&L in repairs Diameter of outlet in 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F PVC SWR pipe 110mm bends

Cleaning of water tank of capacity exc 500 ltrs and n. exc 1000 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and as directed.

Cleaning of water tank of capacity exc 250 ltrs and n. exc 500 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including disconnecting and refixing complete all as specified and as directed.

Desludging/dewatering/pumping/bailing out of contaminated water including cleaning of sludge, scum, silt (both organic and inorganic nature) and night soil from septic tank/soakage wells alongwith inlet/outlet chambers, manholes, soakage pits etc of any capacity after plugging the incoming sewage lines by suction (vaccum) type machine mounted on LCV facility of high pressure caccum including removing the contaminated water in same tank to a place outside contonment to a distance exceeding 50 mtr but not exceeding 100 mtr and burying in pits including rough excavation of pits and carriage of sludge to pits including spreading well in pits after byrying of sludge, covering the pits with 25 cm thick layer of earth nd spreading bleaching powder over the covered are, complete all as specified and directed.

Cleaning the blockage in IWC,EWC, including roding CI pipe after opening the oval asses door of CI bend, chamber etc up to septic tank ,remove the rubbish to a distance n.exc 50m all as specified and directed .

Cleaning/clearing of sewage line (including manholes) 100 mm to 150 mm bore of any description underground any depth removing any type of blockage including desilting, descaling and dechocking from drains as well asfrom manholes with combined high pressure, rodding and flushing after claeaning including clearing of manholes. Sludge water shall be disposed off as directed out side cantt area including taking off manhole cover and refixing the same after cleaning. Note-The contractor shall keep the sewage line functional throughout the contract period. The unit rate quoted by the contractor shall deemed to be inclusive this aspect.

VEER TRADERS

RAVI KUMAR

M S BANSI LAL CONSTRUCTION CO

M/S KOTWAL CONSTRUCTIONS

SAHIL PROCH