Establishment of Fish Hatcheries and related infrastructures at right bank of office complex, SLHEP, NHPC Ltd. Kolaputkar under Dollungmukh Circle, Kamle District, Arunachal Pradesh

Amount

SH-1: Stocking Pond (35 m X 30 m, 1 No.)

Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness): (i) By Manual Means (a) in area of light jungle.

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement for RCC work including bending binding and placing in position complete. a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work)

Providing and fixing brass full way valve with wheel of approved quality.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting propping etc. and removal of form work for:

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fitting of iron screen in inlet/out pipe.

Binding Wire

Iron Nails

SH-2: Brood Stock Pond (15 m X 15 m, 4 Nos.)

Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness): (i) By Manual Means (a) in area of light jungle.

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement for RCC work including bending binding and placing in position complete. a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work)

Providing and fixing brass full way valve with wheel of approved quality.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for :

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fitting of iron screen in inlet/out pipe.

Binding Wire

Iron Nails

SH-3: Nursary Ponds (15 m X 9 m, 4 Nos.)

Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness): (i) By Manual Means (a) in area of light jungle.

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement for RCC work including bending binding and placing in position complete. a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work)

Providing and fixing brass full way valve with wheel of approved quality.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for :

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fitting of iron screen in inlet/out pipe.

Binding Wire

Iron Nails

SH-4: Nursary Ponds (15 m X 5 m, 6 Nos.)

Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness): (i) By Manual Means (a) in area of light jungle.

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement for RCC work including bending binding and placing in position complete. a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work)

Providing and fixing brass full way valve with wheel of approved quality.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for :

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fitting of iron screen in inlet/out pipe.

Binding Wire

Iron Nails

SH-5: Indoor House Shed for Hatchery Units (3 Nos.)

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Column, pillars, posts and struts etc.

d) Lintels, beams, girders,bressumers and cantilevers etc.

Filling in plinth with sand under floors including watering,ramming,consolidating and dressing complete.

Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).

Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Mesh wire gauge 24BWG.

Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc.

Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses: a) 0.8 mm thick GI sheet.

Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 6 mm dia. G.I. limpet and bitumen washers complete : a) 0.8 mm thick GI sheet.

Providing approved best available local wood ( class-B II) work in frames of false ceiling, partions and truss etc. sawn and put up in position. (Above brick wall)

Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.

Providing and fixing panelled, glazed shutters of door, windows and clerestory window including alluminium butt hings with /screws.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Making plinth protection 50 mm thick of cement concrete 1: 3: 6 ( 1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 ( 1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge ) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) including shuttering complete.

Chequered terrazzo tiles 22mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1:3 ( 1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: c) Dark shade using ordinary cement (over CC flooring.)

Providing 22 SWG corrugated G.I sheet walling fixed with 150x8mm 'L' or 'J' hooks bolts and nuts etc. complete excluding cost of frame work which shall be paid for separately.

SH-6: Spwan Collection Tank for Hatchery Units

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work)

Providing and fixing brass full way valve with wheel of approved quality.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for :

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and fitting of iron screen in inlet/out pipe.

Binding Wire

Iron Nails

SH-7: Platform for Incubation Tanks & Breeding Pools for Hatchery Units

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering in: b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. upto floor two level.

20 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for :

d) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Binding Wire

Iron Nails

SH-8: Open Channel for outlet of Hatchery Units

Earth work inexcavation in foundation trenches not exceeding 1.5m in width or 10 sqm on plan or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

a) Hard Soil

b) Ordinary Rock

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: c) In Flats upto 10 mm in thickness.

SH-9: Over Head Tank with Bore Well Provision (30000 Litres)

Earth work inexcavation in foundation trenches not exceeding 1.5m in width or 10 sqm on plan or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

a) Hard Soil

b) Ordinary Rock

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

d) Lintels, beams, girders,bressumers and cantilevers etc.

e) Column, pillars, posts and struts etc.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Boring 02 nos. of tube well (Bore well)..

Kirloskar KU4-0340 5HP 4 inch Borewell oil filled submersible pump with control panel, D11430300180.

Providing and fixing GI pipe complete with GI fittings:

a) 100 mm dia.

b) 32 mm dia.

SH-10: Store-cum-Pump House

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and boldet including special shaped washers etc complete (welding to be paid separately).

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Column, pillars, posts and struts etc.

d) Lintels, beams, girders,bressumers and cantilevers etc.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).

Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Providing approved best available local wood ( class-BII) work in frames of doors, windows clerestorey windows and other frames, wrought framed and fixed in position.

Providing approved best available local wood ( class-BII) work in frames of false ceiling, partitionss and trusses etc. sawn and put up in position.

Providing and fixing panelled, glazed shutters of door, windows and clerestory window including alluminium butt hings with /screws.

Providing and fixing MS grill of required pattern in wooden frames of windows etc with MS Flat, square or round bars with headed bolts and nuts or by screws: b) ornamnetal grill

Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc.

Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).

Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete: a) 300 x 16 mm

Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete: a) 250 x 10 mm

Providing and fixing MS Handles with necessary screws etc complete: a) 125 mm

Providing and fixing M.S Hooks and eyes: a) 300 mm

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with floating coat of neat cement: a) 50 mm thick.

Providing corrugated G.I sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia. With bitumin and G.I limpet washers or with G.I limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses: a) 0.80 mm thick GI sheet.

Extra for providing and fixing corrugate GI sheets vertically or to a pitch exceeding to 60 degree.

Providing ridges or hips 60 cn overall in plain G.I sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I limpet and bitumin washers complete: a) 0.80 mm thick GI sheet.

Providing and fixing 20 mm thick wooden planks ceiling (frame work for base to be paid separately) with M.S screws: a) Timber plank class -A IV

Providing and fixing 3 mm thick hard sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately)

Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling: a) Best local approved quality wood.

Extra for making chamfered edges of beading.

Applying one coat of cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paints of approved brand and manufacture and required shade on new work ( three or more coats) to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.

Making plinth protection 50 mm thick of cement concrete 1: 3: 6 ( 1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 ( 1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge ) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) including shuttering complete.

SH-11: RCC Open Channel (in Ponds Area)

Earth work inexcavation in foundation trenches not exceeding 1.5m in width or 10 sqm on plan or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

a) Hard Soil

b) Ordinary Rock

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

Construction of Embankment with approved materials obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement.

SH-12: RCC Open Channel (Outside)

Earth work inexcavation in foundation trenches not exceeding 1.5m in width or 10 sqm on plan or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

a) Hard Soil

b) Ordinary Rock

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses,plinth and string course, fillets etc from top of foundation up to floor two level including finishingand plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) ofthickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring,shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size).

SH-13: Security Fencing

construction of 1.80 mtrs. High Compound Wall with RCC 1:2:4 columns of section 30cmx30cm, every 2.50m apart and 23cm thick brick panel wall in cement mortar 1:4 ( 1cement : 4 fine sand) and 1.35m MS angle iron post of section 60x60x6mm with 0.45m embeded in columns and 0.45m inclined both ways on top with on top with 5 horizontal lines both ways of GI barbed wire fitted and fixed with GI staples i/c cost of earth work, centering,shuttering and reinforcement etc. complete.

Earth work in excavation in foundation and trenches in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulder upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavated and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50 m.

Providing and laying in foundation and plinth cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering.

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Column, pillars, posts and struts etc.

b) Lintels, beams, girders,bressumers and cantilevers etc.

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Providing and fixing of MS chain link fencing ( ht.=1.8 m, opening 75 mm x 75 mm, wire dia = 4mm).

Providing and fixing of MS barbed wire @ 9.38 kg/100 m

Providing and fixing of M.S Angle post/struts (75x75x8mm) of 3.0 mtr high angle safe hole and premix cost of red oxide primer.

Providing and fixing of G.I. staples in security fencing @ 0.100 kg per post.

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

SH-14: RCC Gate

Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth.

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforcement of RCC work including bending, binding and placing in position complete: a) Tar/TMT steel

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Column, pillars, posts and struts etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc. complete

a) Size of Tile 500 x 500 mm

Providing and fixing of MS Gate including priming and painting complete.

MS HANNA ENTERPRISES (BID ID -6106)