Rohilkhand Nahar khand Bareilly ke antragart satuyia nirikshan bhawan ke saundrikaran sahayak abhiyanta karayale evam jiledari karayale ki sthapna ka karye.

Amount

Earth work in foundation in dry soil including lift up to 1.50 M & lead up to 30 M back filling, waterring and ramming of excavated earth into the trenches and disposal of surplus earth as directed by the Engineer-in-Charge.

Laying C.C. 1:3:6 Mix (M-10) with Cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering.

Brick work in 1:4 cement mortar up to 3M lift & 60 M lead of materials.

25 mm thick D.P.C. in C.C. 1:2:4 with cement, coarse sand & shingle/grit upto 10mm gauge size including water proofing compound in the proportion as specified by the manufacturers excluding cost of all materials but including labour, T&P etc. complete.(uppwd sor chpt 7)

Providing and laying factory made 80mm thick interlocking cement concrete tiles (30mpa) i/c 25mm thick compacted bed of fine sand compacting and proper embeddding / laying of interlocking tiles leveling and dressing of surface to required level and slope filling joints with fine sand i/c the cost of material labour and t& p etc required for proper comletion of work as directed by Engineer -in - charge(uppwd sor pg no 41)

laying 75 mm thick(1:4:8 ) c.c cement,coarse sand and brick balast for providing base for inter locking

Laying R.C.C. 1:1.5:3 Mix (M-20) with Cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.

Dismantling Brickwork or stone work and cement concrete in cement mortar and i/c stacking of material with in a distance of 60 m as per direction of Engineer in Charge

Centering & shuttering for R.C.C./R.B. work i/c cost of centering & shuttering up to 3.0 m. height.

Reinforcement including cutting, bending & binding in position including all cost of labour, material and T&P etc. complete.

Cement Plaster in 1:4 Cement Sand Mix

Dismantling existing plaster including disposal of refuse with in distance of 60 meters.

Distemper 2 coat with oil bond distemper of approved brand manufactured and required shade on decorated wall surface to give an even shade over and including plaster of paris & primer cost with cement primer of approved brand and manufactured such as british shalimar asian paints after throughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surface even also sand prepared smooth including cost of all materials(uppwd sor chpt 15)

Painting new surface surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of materials labour Tools and Plants etc as required for proper completion of work. Paint shall be used as per standard I.S. specification

mild steel or iron work of small size and section such as holding down bolts hold fast the road grating etc wrought to required form including the supply of steel bolts nuts and wastages etc and its fixing required for proper completion of work same as item no 502 but of fabrication of grill and stair case

Providing & Fixing 1mm Thick M.S. Sheet door with frame of 40*40*6mm angle iron and 3.0 mm M.S. gusset plates at the junction and corners all necessary fittings complete i/c applying a priming coat of approved steel primer using flats 40*6 mm for diagonal braces and central cross piece

Providing and laying vetrified floor tiles in different sizes ( thickness to be specified by the manufacturer)with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 i/c grouting the joints with withe cement and matching pigment etc,complete

40mm thick C.C.(1:2:4) flooring without base concrete ( 50% of building area)

Supply and fixing of 10 cm internal dia A.C. down pipe everest or charminar make complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S.clamps 2.5 cm x 3 mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc required for completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipe. But with PVC pipe (kisan,supreme or equivalant ) 6 kg /per sq.cm.pressur 10cm dia.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 One urinal(DSR Item No 17.4.1)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.1 Kitchen sink with drain board:510x1040 mm bowl depth 250 mm each 6008.45(DSR Item No 17.10.1.1 )

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms.(PWD Item No 18.50)(i) 15 mm dia nominal bore

Providing and fixing wash basin with pedestal C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR Item 17.25.1.)

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.8) Concealed work including cutting chases and making good the walls etc. (i)-25mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall,complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.(PWD ELE.SCH. 131C 2018)

Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch &ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.(PWD ELE.SCH. 133C 2018)

Wiring point for plug with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in pvc conduit pipe concealed in the wall, complete with 8 SWG GI earth continuity wire, piano type switch and socket etc. complete in all respect including matching colour wash.(PWD ELE.SCH. 134C 2018)

Wiring point for exhaust fan with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in pvc conduit pipe concealed in the wall, complete with 8 SWG GI earth continuity wire GP Box , and 15 A piano type switch & ceiling rose on 3 mm thick phenolic laminated sheet etc complete in all respects including matching colour wash.(PWD ELE.SCH. 137C 2018)

Supply and fixing and concealing of 25mm dia. 2mm thick pvc conduit pipe in the wall including cutting of brick work, laying of conduit and fixing it with M.S. hooks and then plastering with cement, sand mortar finished to the level, with matching colour wash including cost of proper threading of the conduit & providing necessary socket, bends and chuck nuts and as directed by the Engineer in charge with the supply of all material labour and T&P required for proper completion of work(PWD ELE.SCH. 149A 2018)

Supply and fixing of 2/3/4 ways round PVC conduit confirming to ISS for 25mm dia concealed in wall, keeping its level upto plaster duly provided with proper size cover, screwed as directed at site by the Engineer I/C with supply of all material labour and T&P required for proper completion of work.(PWD ELE.SCH. 155A 2018)

Supply and fixing of switch box 150 x 150 x 65mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge(PWD ELE.SCH. 1602018)

Same as in item No 159 but of but size 175 x 100 x 65mm size(PWD ELE.SCH. 161 2018)

Same as in item No 159 but of but size 200 x 250 x 65mm size(PWD ELE.SCH. 162 2018)

Same as in item No 159 but of but size 250 x 250 x 65mm size(PWD ELE.SCH. 163 2018)

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sqm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete,including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.(PWD ELE.SCH. 291, 2018)

Same as in item 291 but with 2 nos. 6 sq mm and 1 no 4sq mm FRLSH PVC insulated copper conductor cable.(PWD ELE.SCH. 291D, 2018)

S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve CAT B(PWD ELE.SCH. 1001, 2018)

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve(PWD ELE.SCH. 1002, 2018) cat b

S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge.(PWD ELE.SCH. 1024a, 2018)cat b

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.(PWD ELE.SCH. 1149, 2018)

Add for light / fan points with modular type switch in place of piano type switch.(PWD ELE.SCH. 187 A, 2018)

Add for plug point with modular switch & socket in place of piano type switch & socket.(PWD ELE.SCH. 187C, 2018)

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.(PWD ELE.SCH. 1203a, 2018)

Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect(PWD ELE.SCH. 1116, 2018)

Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alroundetc. complete in all respect.(PWD ELE.SCH. 704, 2018)

Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.(PWD ELE.SCH. 721, 2018)

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc.required for proper completion of work.(PWD ELE.SCH. 1139a, 2018)

SINGH CONTRACTOR

M/S SURESH KUMAR JAIN

PL ENTERPRISES