SE/BII/Tech/Health/321_DME

Amount

Supplying and installation of Hera design Fine wood wool panel (Made in Austria) of size 1200 x 600 x 25mm mounted on proprietary supplied G.I Frame work consisting of basic profile, main profile, edge profile and spacer

Supplying and installation of 12mm thick Veneered Plywood fixed on metal work with a backing of 1000GSM x 50mm thick Glass wood. Wooden Studs of 25mm thick x 100 wide . Wooden studs of 25mm thick channels are then fixed to wooden studs and to be fixed perpendicular to plywood panels.

Supplying and installation of AMF Thermatos Thermatos SK 15mincral wool tile (made in Germany) of size 600 x 600 x 15 mm suspended by using proprietary supplied ceiling suspension system to consist of 2mm or 3mm GI suspension rod/wire with adjustable Butterfly hanger

Providing and fixing Unitex carpet tiles of 500 mm x 500mm tiles size firkin made of 100 BCF polypropylene on existing concrete floor

Supply of Conference table made of 19.00 mm thiclk x 2 layer I.S.I. mark phenol bonded anti-termite BWP grade board and finished 1.00 mm thick vaneer sheet complete with internal paint external PU machine polish accessories etc. as per standard size and specification.

Medium back mersh chair each each self calibrating multi locking mechanism 1 2 Adjustable two way lumbar support Height adjustable arms Nylon base.

Medium back mesh chair each KM series mesh self calibrating multilocking mechanism Adjustable lumbar support Height adjustable arms Nylon base.

AF 40-55 mm thick WOODEN ACOUSTIC DOOR –TESTED FOR STC of 40dB providing PROMAT make Acoustic Doors rated for 40dB sound insulation (ARAI certified) Marketed by coruscant trading LLP. The door system duly tested for Integrity & insulation Criteria as per the IS : 3614 Part 2 and BS : 476 part 22 specified in IS :3809-1979 and BS : 476 part 20 & 22 1987 to achieve the required integrity and insulation Door frame : Providing of 1st class hard wood frame of section 120mm x 60mm with density of 650kg/meter cube. Shutter : Providing of 50mm thick smoke check shutter as per BS476 part 20 & 22 IS3614 part-II & ISO 834 comprising of calcium silicate boards 9mm and 12mm thick boards, treated hard wood internal timber fr5ame work of 100 x 30mm with 30mm thick infill of ceramic fiber (density 96khg /cum) with reinforcement FR silicate coating on both sides and faced with Mdf/plywood and externally lipped with hardwood beading Sealant is used to seal the gaps between Calcium silicate Board and shutter beading. Proprietary Acoustic Drop down seals and EPDM Gaskets around the frame are used to enhance acoustic properties : ECODOR F 40-50mm thick WOODEN ACOUSTIC DOOR –TESTED FOR STC of 40dB

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).

Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (i)Partly 6mm thick glass panes and 12mm prelaminated ply board

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (iv) Prelaminated Board

Providing Working Station/Table at Office Room

a) Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

d) Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

(o) Distempering (one coat) with oil bound distemper of approved brand and manufacture and of required shade on old wall surface to give an even shade, after throughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth.

p) Extra over item no (m), (n) and (o) above for every subsequent coat of distempering with oil bound distemper of approved brand and manufacture.

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat.

Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

Extra for providing and mixing waterproofing Plastisizer Plastocrete Plus of Sika India Ltd /Dr. Sealkit LW Super (Asian Chemicals)/ RHEOMAC 730 of BASF @ 200gms per bag of cement in concrete for waterproofing as specified and directed by the Department complete at all levels. A In concrete of proportion: (i) 1 : 2 : 4 (1cement : 2coarse sand : 4aggregate) or M-15 grade.

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

iii)Executive range-2 (Sizes 600 mm x 600mm and above) Somany made- VC Shield (Group- 25) (605x605) mm b) Deluxe -Rotto VC

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). c) Delux range Somany/ Orient/Nitco/Varmora Make ii) Of size 300mmx450mm and above

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (ii)Thickness = 1.0mm thick

Wall painting (One coat) with Plastic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on old wall surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Extra over item no 13.4.9 above for every subsequent coat of wall painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Renewing vitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) iii) Jaquar make a) White (vii) Vignette (Cat. No.VGS-WHT-0207) (inclusive of seat cover and fittings)

Renewing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

Renewing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White (ii) Deluxe Single Flush (Cat. No. C8091/C8057)

Providing and fixing vitreous china bidet complete cutting and making good the wall and floors wherever required. (Bidet mixture to be paid separately) (ii) Hindware Make (a) White (ii) CONSTELLATION floor mounting (Cat. No. 30006)

Renewing wash basin with C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (C) Jaquar Make (a) White (vi) Vignette (Cat. No. VGS-WHT-0612)

(B) Hindware Make (a) White (ii) Classic corner 350 x 350 (Cat. No.10055)

Jaquar make b) Queen's Collection (i) Overhead rose shower with revolving joint & 150mm long swivel shower arm

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) (III) Jaquar make a) Continental (i) Telephone shower 2-in-1 shower with massage effect with 1.5m PVC tube and swinging wall hook.

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make (a)Continental /Clarion (i)Standard

(b)Queen's collection /The Stealth Rangers (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) ii)C.P.2-way bibcock with wall flange

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquar (a) Continental / Clarion (ii)15mm dia( Angular stop cock )

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 600mm x 450mm

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1135N) (with glass bottle)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

(iii) 90mm dia.

a) In exposed surfaces or in trenches. (iii) 90mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

(iii) 90mm dia.

Supplying and fitting ball valve as specified and directed. a) 25 mm dia. (gun metal)

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102)

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 5.0 KVA Automatic Input 120-280 V Out put 200-240 V

Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Overload Relay Range 3.8 - 6.0 Amps for 2.2 KW

Supplying with fitting and fixing of Angle iron framing made 50 mmx50 mmx5 mm size angle iron for accommodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine

Wiring for drawing sub-main line with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, including connection as required complete as directed and specified by the Deptt. With 2 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system,

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 20A Capacity. (C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make)

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying fitting fixing and connection as approved by the Deptt.)1/2 inch & 3/4 inch copper piping with insulation along with connection as approved by the Deptt.)cable including testing and commissioning as directed by the department.

Supplying including and fixing of following Moulded PVC boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface system complete as per direction of department. 1-3 module Surface Moulded PVC boxes

8 module surface Moulded PVC boxes

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 2 module

8 module

Supplying and fixing of 3 Pin Top 6 / 16 Amp on the existing 6 / 16 Amp socket including connection as approved by the Deptt.)complete as required. 3 Pin Top for 16 Amp

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system.

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) double door

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of following size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying, installation, testing & commissioning of Hi-Wall 1.5 ton inverter 5 star rating non ducted split type Air conditioner with remote complete with copper pipe and complete electrical connection as approved by the deptt. Up to 5m between the room unit and out door unit as directed by the deptt. (Carrier make, Superia)

Supplying with installation testing & commissioning of ENDURA SLIM PRO PLUS Model no.LHECDIL6PP1W036 Luminaries etc. complete including all accessories as per specified and directed by the department.

Supplying with installation testing & commissioning of the microphone shall be a cardioids pre-polarized condenser on-table boundary layer microphone designed with on off switch for use in conference applications. The high quality microphone capsule shall be optimized for speech intelligibility. The frequency response shall be 40 Hz – 20000Hz and sensitivity shall be 10mV/Pa. Nominal impedance at 1KHz shall be 200Ω Equivalent noise level shall be 26 dB(A) or 39dB weighted as per CCIR 468-3. Dynamic range shall be 111dB(A) Maximum SPL shall 140dB

Supplying with installation testing & commissioning of 2 way 8 ohm built-oin-ceiling loudspeaker. The loudspeaker has a 8” woofer and a 1” coaxial tweeter, The mounting frame is made of high quality ABS. The grille is made of aluminium max SPL , 1m 107dB : frequency response 50-20K Hz IP rating 54 applicable low impedance : low impedance dynamic power 60watts :impedance 8 ohms

Supplying with installation testing & commissioning of 500W amplifier carrying 4 flexible output channels in a high power density 1 rack unit from factor saves rack space and system cost :Energy efficient with energy Star certification for supreme green credentials and exceptionally low lifetime running costs Flexible intellidrive permits delivering the 4 x 125 W at constant voltage 70 CV or low impedance (2.4.8) and 16 Ohms) on any channel : Total output all channels driven 500W : 4 Ohms 125 W: ignal to Noise Ratio >112dBA Channel separation (Crosstalk) at KHz .70dB Frequency Response 2Hz-40KHz

Supplying with installation testing & commissioning of Advanced Digital Audio Processor for installation Applications : Number of Channels 1 (8AEC enabled ): Type: Analogue , electronically balanced Euro block connectors : Impedance 10KΩ: Maximum input level +24dBu: Gain range 0 to 66dB; Common mode rejection Typically , -60dB at KHz Crosstalk (inter –Channel @ KHZ )<75dB: Phantom power +48VDC: Comprehensive Library of DSP algorithms optimized for installation applications: multiple format IP-based Audio networking for each of integration: RS232 connector for interfacing with 3rd party control systems: frequency response 20Hz to 20KHz (±)1dB input to output @+4dBu): Number of Channels 2 in /2 out : Resolution 24-bit with Sampling rate 48KHz

Supplying with installation testing & commissioning of specifically designed for diverse business environments, especially vi Creston connected and DPM as well as its smart connectivity, simple user friendly interface and ULTRA HD picture quality with type of edge , Resolution 3840 x 2160 (UHD) Brightness 330 cd/m2 viewing angle degree 1780 /1780, Aspect ratio 16:9 original, 4:3 vertical zoom, All- direction zoom, interface 2 x HDMI, 2 x USB, rear EF, AF, AV in digital optical audio out out RS-232C, Headphone out, R145, External speaker out.

Supplying, installation testing & commissioning of Quick design making and extensive information sharing and essential for today’s business Full HD 1080P image quality Expandable up to 6 sites optional license : Communication method –SIP. H323 Video Compression Method –H.261(mainstream only) H.263H.263.H.263+, H.263++(reception only) . H.261 High Profile H.264 Baseline profile : Remote Camera Control –H.224.H.281(Zoom/Pam/Tilt/Preset): Communication Bandwidth -256Kbps to 18Mbps: Video Compatible Regulation *2-1024x 768p. 1280 x 720p. 1280 x 768p . 1280 x 800p. 1920 x 1080p: No. of frames – Max 60 frames/second (When using H.264 1080p); Camera*3 –HDMI main x 1. HDMI sub x 1.

12X Optical/ 10X Digital Zoom PTZ Camera

Panasonic Boundary Microphone (2 m radius 1 only), (Analong)

Supply, installation, testing & commissioning of havells transparent FR PVC insulated twin core copper conductor (Flexible) Industrial Speaker Cable

Supply, installation, testing & commissioning of balanced microphone cable with single shied, high flexible, valvet faint PVC Jacket , Industrial standard clone product very similar to competition products of the industry :PVC 6.0mm max O: Copper wires (0.10mm) 100% coverage

Supply, installation, testing & commissioning of the SRW 12U 12U wall –Mount Rack Enclosure cabinet is designed to integrate wail-mounting, easy equipment access and cable management in IT network applications with limited floors space

Supply, installation, testing & commissioning of 10 mtrs. HDMI cable with 24K gold –plated connectors resist corrosion and offer the best possible : Max . Resolution -4K @60Hz(4:4:4) \\; Connectivity : standard Compliance HDR .HDCP

Supply, installation, testing & commissioning of Pop Up Box with Two (2) female VGA HD connector and 3.5mm mini stereo audio jack ; Two (2) CAT :RJ45 network ports for data and phone connectors : Two (2) un-switched AC 110v-24v, 50/60HZ 10A outputs

Supply, installation, testing & commissioning of Output power capacity 2.4KWatts/3.0KVA Max Configurable Power (Watts) 2.4 K Watts /3.0 KVA; Efficiency at Full Load 93.0% Output Frequency (Not synced) 60Hz +- 0.1% for 60Hz nominal , 50Hz+/-0.1% for 50Hz nominal; Audible noise at 1 meter from surface of unit 55.0dBA2.4 K Watts /3.0 KVA; Efficiency at Full Load 93.0% Output Frequency (Not synced) 60Hz +- 0.1% for 60Hz nominal , 50Hz+/-0.1% for 50Hz nominal; Audible noise at 1 meter from surface of unit 55.0dBA

42 AH Battery for backup

Rack for battery

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Md. Karamat Ansari

BANIK ENTERPRISE