Servicing Schedule maintenance to 50HP 03-Cusec and 16.5 HP 2 Cusec Diesel Driven Dewatering Pump Sets installed at Indra Colony Dewatering Station

Amount

Servicing/schedule maintenance to the 50HP, 4 cylinders engine of Diesel driven Dewatering Pump set No. 28 installed at Indra Colony Dewatering Station by way of decoupling the engine from pumping unit and then unscrewing from base frame. Dismantling canopy from engine. Dismantle the suction and delivery pipe lines from pump. Dismantling the engine at site to extract parts. Cleaning/decarbonising the engine/components with recommended chemicals. Providing/fitting of gaskets & thrust washer-4Nos, air filter, M.oil filter, fuel filters oil pipes with banjo bolts, m-oil pipes/overflow pipes, oil seal, head gaskets. Testing the engine on no load. Job includes filling of m-oil 20 ltrs and idle testing. Job further includes servicing/repair to 3-Cusec pump by way of complete dismantling of pump by extracting the pump shaft, bearings, and impeller. P/f of gland bush-1no. Reassembling the pump by P/F of new gasket, nuts and bolts, gland packing & greasing the bearing properly. Refitting the serviced/repaired pump at its installed position by p/f of nuts & bolts, refitting of suction and delivery line by providing and fitting of rubber sheet joint, nuts and bolts required. Cleaning to 250 mm dia MS foot valve by way of dismantling it from installed position. providing and fitting of new hinge pin, rubber sheet, nuts and bolts, fitting the foot valve with suction pipe. Complete job incl. cost of spares, material, welding, labour and carriage charges (to& fro) and hire charges of, tools and tackles. Complete Job inclusive of all taxes.

Servicing/ schedule maintenance to the 16.5HP diesel driven engine and pump set No 15 installed at Indra Coloney D/w station, by way of decoupling the engine from pumping unit and then unscrewing from base frame. Dismantling of pump from installed position and dismantling of suction & delivery bends with the help of tripods, chain pulley block & manual labour. Dismantling the engine to extract parts. Cleaning/decarbonising the engine/components with recommended chemicals. P/F gaskets 2 sets each, thrust washer, air filter, m.oil filter. Adjustment to tappets assembly. Complete repairs and calibration of fuel pump by dismantling and then P/f of new parts i.e injector nozzles, plungers, springs, lock sets etc. Calibrating the pump on calibration bench and fitting with engines, testing the engines on no load. Job includes providing filling of engine oil 8ltrs, idle testing for 6hrs its fuel charges .Job further includes servicing to 2 Cusec Pump of Indra Colony D/w stations by way of completely dismantling the pump by extracting the shafts, bearings, and impellers. P/F of gland bush-01 no, new sleeve, lock nut, keyway reassembling the pump unit by p/f of new gaskets, nuts bolts, gland packing and greasing the bearing properly. Then refitting the pump on the base frame, repair to the foot valve and cleaning of the strainer. Job further includes cleaning of sump by way of desilting the mud/ removing of unwanted accumulated material and disposing it to suitable place. Complete job incl. cost of spares ,Skilled/semi skilled labour charges, hire charges for tools and tackles required for the job. Complete job inclusive of all taxes.

Vaibhav Engineers and Technocrates

GEETA ENGINEERING MECH WORKS