SPECIAL REPAIR TO BLDG NO 1/E AND 2/T IN BSO YARD UNDER GE (EAST) MATHURA

Amount

Dismantling of Asbestos Cement (corrugated or semi-corrugated) sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based fully corrugated steel sheet AZ-150, thickness of 0.65mm of any colour and finish with resin coat on both surfaces having tensile strength of 650 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based fully corrugated plain steel sheet AZ-150, thickness of 0.65mm of any and finish with resin coat on both surfaces colour having tensile strength of 650 Mpa as per IS 15965: 2012 as in cladding to wall etc, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

M&L for Providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs, mud stops & coping etc, rounded chamfered on edge complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound @200ml/50 kg bag of cement surface finished even & fair complete all as specified and as directed. Note : Liquid WPC shall be measured and paid seperately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, over and including a coat of primer complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth (without using extra cement) complete all as specified and as directed.

M&L for prepration of new plastered surface of wall and applying three coats of white wash complete all as specified and as directed.

M&L for prepration of old plastered surface of walls and applying one coat of white wash complete all as specified and as directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforecement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for 50 mm thick sand stone slabs as in chajjas of ground and first floors over windows, doors etc set and jointed in cement mortar 1:4 complete all as specified and directed.

S&F rolled mild steel joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 Gde E-250 quality including applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for hardcore of broken brick, bricks gauge exc. 100mm and n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base, sub floor, floor and paving finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 100mm thickness, M-40 Grade complete all as specified and as directed. Mehtab tiles (Indore), Swastic tiles (Alwar), NTC tiles (Chandigarh)

M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size Sub-class 'B' Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size sub class 'B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L for preparation of old plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Use & waste of Form work to soffits of flat suspended slabs such as roof slabs floor slab landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete type M-25 (using 20mm graded stone aggragates) as in Slabs supported on walls, beams and columns in floors, roofs, lintel bends and the like complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of stone slabs & tiles of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine cut kota stone slab as in flooring 20-25 mm thick and not less than 1.30 sqm in full length thick laid over and including 15mm thick screed bed in cement mortar 1:6 and jointed with gray cement mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:6 complete all as specified and as directed.

M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

M&L for mild steel, plain, black sheet of 0.63mm thickness for steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

S&F for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door etc complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded fixed to wall complete all as specified and as directed.

S&F Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for welded steel wire fabric supplied and fixed to wood or steel members weight n exc 4kg/Sqm complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and as directed

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.

M&L for treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.

Taking down carefully by Submain wiring of any type size and make making good the disturbed surface to match with existing surface complete all as specified and as directed.

Taking down old unserviceable existing SPN/TPN DB/enclousers any size and type/any descriptions as iron sheet scrap including MCB's/MCCB's any type/size and making good disturbed surface/wall as per existing complete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm (nominal area) PVC insulated unsheathed single core multi-stranded copper conductor cable 1100 Volts grade FRLS, in universal colour code drawn through and including suitable size of rigid non-metallic PVC concealed conduit (not less than 20mm dia med grade) and its all accessories complete concealed in wall/roof including cutting and chases (making good all to the disturbed surface as per existing) along with modular flush metal boxes with modular cover plates and frame for mounting modular switches, sockets, regulators etc and including 1.5 sq mm continuous PVC insulated unsheathed solid/stranded copper conductor cable FRLS in green colour for earth continuity wire for one light/fan/bell point controlled by one switch compleyte all as specified and as directed.

S&F Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.

Material and labour for point wiring with 1.5 sq mm (nominal area) PVC insulated unsheathed single core multi-stranded copper conductor cable 1100 Volts grade FRLS, in universal colour code drawn through and including suitable size of stove enamelled steel conduit (not less than 20mm dia med grade) and its all accessories complete concealed in wall/roof including cutting and chases (making good all to the disturbed surface as per existing) along with modular flush metal boxes with modular cover plates and frame for mounting modular switches, sockets, regulators etc and including 1.5 sq mm continuous PVC insulated unsheathed solid/stranded copper conductor cable FRLS in green colour for earth continuity wire for one light/fan/bell point controlled by one switch compleyte all as specified and as directed.

All as per item No 51 here-in-above but One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.

Material and labour for point wiring with 2.5 sq mm (nominal area) PVC insulated unsheathed single core multi-stranded copper conductor cable 1100 Volts grade FRLS, in universal colour code drawn through and including suitable size of stove enamelled steel conduit (not less than 20mm dia med grade) and its all accessories complete concealed in wall/roof including cutting and chases (making good all to the disturbed surface as per existing) along with modular flush metal boxes with modular cover plates and frame for mounting modular switches, sockets, regulators etc and including 2.5 sq mm continuous PVC insulated unsheathed solid/stranded copper conductor cable FRLS in green colour for earth continuity wire for one light/fan/bell point controlled by one switch compleyte all as specified and as directed.

S&F switch flameproof rotary type with termination box in LM6, 16A single pole 250 volt complete all as specified and as directed.

S&F flameproof switch socket and plug combined in LM6 cable termination box in LM6, 16A single pole 250 volt, 2P + earth complete all as specified and as directed.

S&F flameproof switch socket and plug combined in LM6 cable termination box in LM6, 25A single pole 250 volt, 2P + earth complete all as specified and as directed.

S&F in repair LED light fitting 2 x 16 watt flameproof, CMRI certified recommended for gas/vapor group of IIA & IIB Zone 1 & 2 and IP 65 protection die cast aluminium hosing with heat resistant toughened glass with LED tubelight fixture driver, holder, connector etc complete with all accessories prewired and including connection up with three core FRLS copper cable with suitable size complete all as specified and as directed.

S&F Modular white cover plate with frame, 1 module complete all as specified and as directed.

S&F Modular metal flush box 1/2 module complete all as specified and as directed.

S&F 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including 30 LED light and all connections complete all as specified and as directed.

S&F building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos of clamps made out of 50x40mm flat fixed with nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as directed.

M&L for Sub Main Wiring with two runs single core 6 sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note : Two runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.

S&F sheet metal enclosure MCB distribution board, TPN 4 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240V incl taking out old U/S DBs complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 8 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240V incl taking out old U/S DBscomplete all as specified and as directed.

S&F in repair MCB TPN 40 to 100 Amps,' C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in repair MCB DP 40 to 63 Amps,' C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in repair MCB SP 6 to 32 Amps,' C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable of size 50 Sqmm 3.5 core with aluminium conductor laid in trenches/duct/fixing on walls/poles including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately under appropriate item(s) of this BOQ.

Excavating in trenches, n exc 1.5 m in depth and n exc 1.5 m in wide for laying of cable etc. in soft/loose soil and getting out complete all as specified and as directed.

Returning filling in soil including spreading levelling watering and well ramming in layers not exc 25 mm thick complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables for protection of cable complete all as specified and as directed. Note : Punned depth shall only be measured for payment as specified.

Supply and laying reinforced precast concrete cable cover, class LV type 1, flat, size 250mmx150mmx40mm for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.

M&L for Steel tubes, light grade, galvanised with all fittings such as clamps, nuts and nut and bolts, washers etc fixed to walls/laid in floors/poles/road crossing etc of size 40mm dia bore complete all as specified and as directed:-

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC )1:3:6) type C2 using 40mm graded stone aggregate in pit with 50mm thick Precast RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 100mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

JWALA ELECTRIC CONTRACTORS (BID ID -3397280)

BHARDWAJ CONSTRUCTIONS (BID ID -3395085)

THENUA BUILDERS (BID ID -3398130)

Ms Kamal Kant Agarwal (BID ID -3404636)

Deepak Saxena (BID ID -3396556)