Repair to New Tahasil office Building at Maneswar for the year 25-26

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead etc complete asper direction of Engineer in charge.

Dismantling and removing doors, windows and ventilators including removal of frames hinges fastening and staking the useful materials for reuse and remving the debries within 50m lead etc complete as per direction of Engineer in charge.

Fly ash bricks masonary with CM (1:6) in superstructure including cost conveyance, royalty and taxes of all materials labour T&P etc complete including watering and curing for required period as per direction of the Engineer in charge.

12mm thick cement plaster in C.M.(1:6) over brick finished smooth to the outside smooth surface of wall including cost conveyance royalty and taxes of all materials cost of labour and T&P etc. complete as per specification and direction of the Engineer-in -charge.

Colour washing two coats over a coat of white washing with shell lime and colouring materials etc. complete as per specification and direction of the Engineer-in-charge.

Finishing wall surface with Acrylic wall putty( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.

Distempering two coats with any approved shade to give an even shade over one coat of white washing including washing cleaning old distempered walls including all cost and labour etc complete asper direction ofEngineer (Ground floor)

First floor

Head Room

Finishing wall with water proofing cement paint of approved shade on new work two coat to give an even shade including all cost and labour etc complete as per direction of Engineer in charge.(Ground floor)

First floor

Head Room

Painting two coats over a coat of priming with approved paint and primer on wood and iron work including cost of paint etc. complete as per specification and direction of the EIC. (Ground floor)

First floor

Head Room

Supplying fitting and fiing of AL door with anodised aluminium section of 9201 as vertical 9201 as top 9200 as bottom and middle member with frame section as 9221 with tappered clip no.4660 and frame to be completed by means of jointing angle number 1855 labour T&P etc complete as per direction of Engineer in charge.

Providing fitting and fixing and false ceiling with aluminium anodised T section No. 3215 with 2'-0" centre to center L section No. 1705 up to 15 micron on 4 walls to be dixed by means of steel screw and PVC plug and the aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete asper direction of Engineer in charge

Supplying fitting fixing of UPVC casement door 60 series duly manufactures iusing UPVC reinforced profiles of 60mmx55mmx2.50mm outer frame 102mmx 60mmx2.25mm for casement door spash profile and 74mmx60mmx2.50mm mution profile capable of mounting single glazing system structurally reinforced with hot dip etc complete asper direction of Engineer in charge

Supplying,fitting and fixing Chequred tiles in floors of size 30cm x 30cm on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost of all materials,labour,T & P rubbing and polishing etc.required for the work etc.complete as per specification and direction of the Engineer-in-charge.