Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance B 4 NEAR CENTRAL PARK RHB COLONY SOUTH EXTN BALICHA UDAIPUR RAJASTHAN | UDAIPUR | UDAIPUR | RAJASTHAN | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 28 29 205A LINK ROAD LAJPAT NAGAR III NEW DELHI 110024 | NEW DELHI | NEW DELHI | DELHI | 110024 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.9 Cr
EMD Value
₹9.9 L
Closing Date
3 Oct 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer and DCE (CED, PD and EP)
2nd floor Sarathi Builiding NFC ECIL Post 500062
CISF BARRACKS CIVIL, PH, ELECTRICAL, CONDUITING AND OTHER ALLIED WORKS FOR CONSTRUCTION OF CISF BARRACKS AT NFC KOTA TOWNSHIP
2023_NFC_772385_1
C/1322/2023
Limited
Civil Works
Works
300 days
NFC Kota
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹9.9 L
4 Oct 2023
20 Sept 2023
4 Oct 2023
20 Sept 2023
3 Oct 2023
20 Sept 2023
Amount
I. EARTH WORK :
Earth work in over areas by mechanical means (Hydraulic excavator) / manual means/controlled blasting to required profile, level, grade, camber, etc in all soils/strata as mentioned below upto all depths as per drawing and as directed, 1.5 m in width as well as 10 sqm in plan area including dressing of excavated sides and ramming of bottoms and disposal / stacking of excavated materilas and lead within NFC-K township premises and all inherent lifts and filling in layers not exceeding 200mm, watering, consolidation etc. complete all as per specifications, drawing and as directed by Engineer-in-charge.
Soft rock (Loose soil)excavation up to 1.5m level
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or by using machine such as poclain with jack hammer or controlled blasting or by approved chemical method(obtaining permit shall be responsibility of contractor) as directed by EIC including backfilling, dressing and ramming using available/brought from outside soil/crushed rock filling in layers not exceeding 200mm, watering, consolidation etc. complete all as per specifications, drawing and as directed by Engineer-in-charge.
a) Up to 1.5 m from ground level
b) Above 1.5 m to 3.0 m depth from average ground level.
II. CONCRETE (PLAIN AND REINFORCED) :
Plain Cement Concrete (P.C.C) 1:3:6 by insitu mixing using Weigh Batching or RMC using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 with Minimum Cementitious Content not less than 250 Kg/Cum (M/s. ACC,Ultra Tech, Ambuja, Birla or equivalent make as approved by EIC) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
Reinforced Cement Concrete by insitu mixing using Weigh Batching or approved RMC of Grade M - 25 (Minimum Cementitious Content not less than 330 Kg/Cum) up to specified level using using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 (M/s. M/s. ACC,Ultra Tech, Ambuja, Birla or equivalent make as approved by EIC ) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. FOSROC ,SIKA,BASF,CICO in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.
Below FFL
Above FFL
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-20 insitu mixing BY WEIGH BATCHER using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 (M/s. M/s. ACC,Ultra Tech, Ambuja, Birla or equivalent make as approved by EIC ), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes including formwork but excluding reinforcement.
III. FORM WORK :
Providing centering and shuttering using good quality densified film-faced Plywood of at least 12mm thick approved make conforming to IS 4990 including strutting, propping, staging made out of steel frames/H-frames/ Mild Steel (MS) Pipes/Cup and Lock System etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other ) on all shuttering surfaces coming in contact with concrete,including PVC cover blocks etc., if required, for insitu Reinforced Concrete and in Plain Cement Concrete works etc., complete as specified and directed. NOTE: The Formwork shall be designed and got approved from the Design Section before erection
a) Below and Upto Finish Floor Level
b) Above Finish Floor Level
IV. REINFORCEMENT & STRUCTURAL STEEL
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag steel, Sail, JSW, JSPL make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and as per direction of Engineer- in-Charge.
Supplying, fabricating, erecting and fixing in position, insert plates/ embedded plates/pipes/MS Hollow Tubes of GI in medium quality conforming to relevant BIS codes of required shape and size, welding anchoring legs not less than 12mm dia MS rods, placing in position in concrete while casting, including painting with one coat of approved red oxide zinc chromate primer and two coats of synthetic enamel paint complete as per drawing in line, level and plumb complete as directed.
V. BRICK MASONRY :
(a) The contactor shall get approved the sample of bricks from the Engineer-In-Charge before procurement on large scale and shall maintain the same for the entire work. (b) Necessaryopenings/nitches/cut-outs,wherever required as per drawings and asked for by the Engineer-In-Charge,shall be provided by the contracter without any extra cost. c) One brick wall thickness shall be considered as 230mm and half brick wall as 115mm and lesser wall thickness if any shall be made up to the required dimensions by the contractor in CM 1:4 to proper line , level and plumb without any extra cost to the Department.d)The rate shall include cost of making the brick masonary to all geometrical shapes and sizes without any extra cost to the Department.
Brick masonary in super structure at all floors and locations using solid autoclave aerated concrete bricks/blocks from approved manufactures conforming to IS2185 (part 3) latest edition in CM 1:6 in walls to correct line, level and plumb including racking out joints, curing, scaffolding, etc completye as per specification, drawing and as directed by Engineer in Charge.
Providing solid autoclave areated concrete brick/block work 115mm thick in partition walls,dwarf walls,parapets,under platforms,curtain walls,fins,external boxing etc. at all floors and locations as per drawing,conforming to IS2185 (part 3) latest edition in C.M 1:4 to correct line,level & plumb including sacffolding,racking out joints, curing etc.complete as per specifications drawings & as directed by the Engineer in charge. i) With115mm,wide and 80mm. thick RCC (1:2:4) stiffeners at every one metre heigth including formwork but excluding the cost of steel reinforcement,which shall be paid under relevent item.
VI FLOORING :
GSB: Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator/approved means at OMC and compacting with vibratory roller of 8 to 10 Tons Capacity/approve means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).
Providing & fixing following vitrified tiles of various thickness or as per manufacturer's specification conforming to IS 15622 for flooring ( thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid on 20 mm thick cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.): 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with epoxy grout and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
a) Double charge Glazed Vitrified (Rustic) Tile Polished finish of Size of tile 600 X 600mm X 8-10 mm thk for Change rooms , Dry and cold stores, Pantry.
b) In skirting laid over 12 mm thick CM 1:3 backing. (600x600mm.)
c) Double charge Glazed Vitrified Tile Polished finish of Size of tile 800 X 800 mm X 8-10 mm thk for Lobby and Dormitry area.
d) In skirting laid over 12 mm thick CM 1:3 backing.(800x800mm).
e) Glazed Vitrified Tile Matt/Anti-skid/Rustic finish of Size of tile 600 X 600X 15 mm thk for kichen and dining area.( Thickness to be specified by the manufacturer)
f) In skirting laid over 12 mm thick CM 1:3 backing. (600x600)
Providing and laying non-skid ceramic floor tiles of size 600 X 600 mm (Thickness to be specified by the manufacturer ), of Ist quality conforming to IS: 15622, of Johnson&Johnson/Somany/Regency/Rak ceramics or approved make , in all colours, shades, laid on 20mm thick cement slurry mortar 1:4 (1 Cement : 4crushed stone Sand), jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with epoxy grout and matching pigments etc., complete for toilets.
Providing and fixing Ist quality ceramic glazed wall tiles of size 200x300/300x300/300X600 (Thickness to be specified by the manufacturer), conforming to IS: 15622 to be, of Johnson&Johnson/Somany/Regency/Rak ceramics or approved make, in all colours, shades of any size as approved by Engineer- in- charge , in dados, over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for risers/skirting of required size, approved shade, colour and texture laid over 12 mm thick, 1:3 cement mortar for risers joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, polishing to edges to give high gloss finish etc. complete at all levels for stair case & counter wash basin etc. complete as specified and directed.
Providing and fixing 18 mm thick Granite flooring/dado using slabs of gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring/kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse Msand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish incuding making holes, molding half round/full round nosing and grooves for antislippery measure etc. complete at all levels as specified and directed.
VII. DOORS AND WINDOWS:
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT of any colour comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
a) Frame size 50 x 100 mm.
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid plain flush door shutter of required size & Colour comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent, include providing and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, for each door complete as directed. For toilet doors all as per direction of engineer in Charge. The doors if required shall be painted with two coats of synthetic enamel paint over one coat of primer complete as specified and directed by EIC.
a) 30 mm thick.
Providing wood work with CP teakwood in frames for doors & cupboards using II class teakwood at all heights above plinth level wrought framed and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick, BWR grade, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and pre-lamination of required design, colour and pattern including providing teak veneer of 0.4mm ( min) on both faces requisite finish providing and fixing under pressure with approved type adhesive 200 x 150 mm laminated sheet on both sides where mortice lock is fixed including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing &fixing ISI marked 4 nos SS butt hinges with SS pin size 125 x 63 x 1.9 mmwith screws, &fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
a) Single leaf flush door shutter with natural teak vineer of 0.4mm thick on both faces with french polishing with a melamine coat.
Providing and fixing factory made uPVC white colour sliding glazed window/ventillators comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension including glazing of 6mm thick toughened glass of make Modigurad, Saint Gobain.
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension including glazing complete as specified and directed.
Stick Structural glazing System :Designing , Providing & fixing of 6MM THK SGU colour glass stick glazing suystem including powder coated Aluminium Sections of make Brand Jindal /Hindalco or equivalent mullion and Transom 111 X 58 X 2 mm & 75 X 58 X 2 mm thick with 80 micron Powder Coading or as per design , designed to withstand wind pressure up to 150 Km/hr., Fabrication charges with notched and fixed with galvanised MS brackets (HDG) hot deep.sealing all joints between individual panels with 20mm wide x 4 mm deep Silicone Joints with Silpurf NB of GE Silicones / Dow Corning 995 with backor rod to give air tight curtain wall to the building. Rate including frame work cost and conveyance of all materials, labour charges, scaffolding etc.Supply and fixing Vision glass SGU 6 MM THK colour/ reflective Saint gobain glass/Gaurdian Glass/ASI/Modigurd including 25% Ventilation Area i.e providing top hung openble window along with all hardwares having heavy duty point lock, handle, SS friction hinges and all other necessary hardware and screw complete as pecified and directed by EIC.The rate shall include cost of filler between he floors to have air tight system.
Supplying and fixing to wooden doors at and at all heights above plinth level approved mortise locks of Godrej /Everite make or make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its make with approved cadmium plated brass screws of appropriate size etc., complete as directed to single/double shutters for all doors.
Supplying and fixing to wooden doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its ) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
a) using 250 mm long, 10 mm shoot.
b) using 150 mm long, 10 mm shoot.
c) Baby latch
Supplying and fixing to wooden doors at all heights above plinth level approved SS door Handles 22mm dia & 300 mm long conforming to relevant IS specifications and with ISI marking with approved SS screws of appropriate size etc., complete as directed.
Supplying and fixing to wooden doors approved SS aldrop conforming to relevant IS specifications and with ISI marking classic/ J.S.E. (ECIE) make or any of size 250 x 19 mm with suitable approved CP brass screws, machine screws or bolts for securing clamps from inside etc., complete as directed.
Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed..
Supplying and fixing to doors at and at all heights above plinth level approved best quality SS hanging floor door stoppers with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper.
VIII. PLASTERING AND POINTING :
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
Cement plastering 15 mm thick for internal walls in cement morar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)} fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC and also other places wherever required over brick walls or concrete surface preparation of surface, steel/tubular scaffolding curing etc., complete as specified and directed.
Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level with 12mm thick base coat in Cement Mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)}, 8mm thick finishing coat in Cement Mortar1:3 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 3 River Sand (conforming to IS 1542)}, final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, curing, etc., complete as specified and directed.
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete.
IX. PAINTING:
Walls and ceiling painting with premium acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.of Asian or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger brand, manufacture and shade over two coats of approved primer at all heights above plinth level including preparing the surfaces, scaffolding and cleaning, etc., complete and as directed.
Painting exterior walls on sand faced plaster with two coats of Alkali & fungal resistance, dirt resistance exterior paint with comprehensive warranty of 5 years of required shade of Makes Asian - Apex Advanced or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete. Note :- Minimum Usage Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. or as per manufacturer's specification
X. WATERPROOFING :
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. NOTE :- 1)The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma. 3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanada Chemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground drains/cable trench etc.
XI. MISCELLANEOUS ITEMS :
Providing and fixing stainless steel ( Grade 304) railing of make Jindal Stainless (JSL) made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,
Supplying, lowering, laying, RCC SPUN PIPES of class and internal dia mentioned below conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.
a) 150mm NB NP-2
b) 300mm NB NP-2
b) 600mm NB NP-3
Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of shrinkhomp-30N/Sqmm of M/S A.C.C, Fosroc or equivalent mixed with filler like sand in 1:1, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed. note: Weight of grout used in the work will be measured for payment. However, the rate quoted shall inclusive of all materials.
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
XII: WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC brass threaded fittings, i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed concealed/exposed including cutting chases and making good the walls.
a) For the following Nominal Bore (NB) pipe: 20 mm
b) For the following Nominal Bore (NB) pipe: 25 mm
c) For the following Nominal Bore (NB) pipe: 32 mm
d) For the following Nominal Bore (NB) pipe: 40 mm
e) For the following Nominal Bore (NB) pipe: 50 mm
Providing and fixing in position CPVC ball valves of following sizes of Ashirvad/Supreme make confirming to SDR 11 fittings, including jointing material etc, as specified and directed.
a) 20mm nb for coolers
b) 25 mm n.b.
c) 32 mm n.b.
d) 40 mm n.b.
e) 50 mm n.b.
Providing, fabricating and fixing the following sizes G.I PIPE INSERTS of length not less than 800mm fabricating out of GI pepes confirming to IS 1239, of heavy quality with threaded one side/ two sides suitably protected, including supplying and welding a puddle flange fabricated out of 200mm*200mm plate of 6mm thick and fixing the inserts to watertank walls/slab for inlett,outlet,scour, overfloor connections completed all as directed.
a) Outlet connections of 50mm n.b and above.
b) For scour with a GI screwed socket and plug of size 50mm n.b
c) For inlet and over flow 50mm n.b
Providing, hoisting and installing at required elevation minimum three layered moulded HDPE cylindrical vertical water storage tanks of various capacities of Sintex or Duracon make with suitable SMC cover at top, coated with UV coating, inlcuding the cost of labour for making hole in the stoarge tank for inlet outlet scour and overflow and the required fittings/gaskets, float valve including making necessary supporting sytem complete as specified and directed by EIC.
XIII. DRAINAGE
Providing & laying structured wall UPVC under ground drainage pipes & fittings (SN-8) of Ashirvad/Supreme make for sewer lines of following size conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, complete as specified and directed
a) 110 mm DN (SN 8kN/m²-SDR34)
b) 160 mm DN (SN 8kN/m²-SDR34)
Supplying and fixing following size GRADE B uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, etc, complete as specified and directed.
a) 75 mm n.b. pipes
b) 100 mm n.b. pipes
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
Providing and fixing in position UPVC bottle Gully Trap of Supreme /Ashirvad make of 160 X 110mm sizes including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed.
Providing uPVC Floor Trap/ Multifloor trap of Ashirvad /Supreme make / Nahani Trap of 110 x 75 x 50 mm size size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed
Providing and fixing of best quality UPVC P trap conforming to IS 14735 for urinals of size 110mm X 110mm with 50mm water seal of Ashirvad /Supreme make with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed..
XIV. SANITARY ITEMS :
Providing and fixing coupled EUROPEAN WATER CLOSET of Parryware make/Hindware , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required.
Providing & fixing vitreous China undercounter/Overcounter Wash hand basin consisting following items of work:- i)Providing vitreous china wash basin conforming to IS 2556 ( part - IV ) and placing the wash basin in position as shown in the drawing or as directed. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin, conforming to IS 775 for Wall hung basin.( For wall hung wash basin) iii) Fixing Vitreous China under / over the counter / semi recessed type Wash Basin and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. ( For under/over counter wash basin ) iv) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin.. v) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge. vi) C.P. brass waste of standard pattern, 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781., 32 mm CP brass bottle trap, with extension pieceincluding painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed
a) Vitreous China semi pedestal Wall hung Wash Hand Basin, 570x480 mm size of HINDWARE Make Studio model Cat. No:10096 & pedestal 11038 or equivalent.
Providing and fixing as per IS 2556 flat back half stall urinal of size of 328x558 mm size of Hindware/Jaguar or equivalent for supporting the pan on suitable heavy quality CI wall brackets, 32 mm n.b. heavy quality, approved make CP brass bottle trap with extension piece, fixing with CP brass spreader and suitable heavy quality CP brass waste coupling to urinal basin, CP brass grating, spring based flush valve for operation of water flushing etc., complete as specified and directed.
Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed.
Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.
a) Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/Hindware make conforming to IS: 8931 on G.I. lines- size 15 mm.
b) C.P brass 2 Way Bib Cock with wall flange of Jaguar Cat.No. ORM 10041
c) Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-573) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed.
d) C.P brass Bottle Trap, 30 mm dia. with wall flange of Jaquar cat. No. ALD 769.
e) C.P brass single lever basin mixer of 'Jaquar' cat. No. ORM-10011B.
f) CP brass over head Shower 120 mm dia, multi function with cascade effect & wall flange of Jaquar Cat. No. OHS 1779
g) Sink Cock with Extended Swinging Spout (Wall Mounted Model) with Wall Flange Jaguar cat. FLR-5347ND
h) Providing Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges of Jaquar product code FLR-CHR-5273UPR complete as specified and directed
i) Regular Body Concealed Stop cock with protection cap suitable for 15/20 mm pipe line of Jaquar cat. No. ALD-083 and exposed part kit with fitting sleeve, operating lever & adjustable wall flange with seal of Jaquar cat. No. ORM-10083K.
j) CP brass Shower Arm straight with wall flange of Jaquar Cat. No. SHA 49483.
k) CP brass waste coupling 32 mm size with 80 mm height as per Jaquar cat. No. ALD-705/709 for wash basin
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.
a) Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553
b) Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
c) Stainless steel Towel Rail/Grab bar of Jaquar Cat. No. AHS-1507.
d) CP brass double Coat Hook of Jaguar Cat. No. AKP-35761P.
e) Liquid soap dispenser Jaquar CAN 1135N
f) Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N
g) Towel Ring square with round flange of Jaquar Cat. No. CAN 1121N
Description of Work / Item(s)
Amount
Supply
Installation
Supply and installation of Legrand/Hager/ Havells/ MDS/Siemens make double door TPN/SPN Distribution boards with minimun IP 43 of following sizes C-Rating MCB may be used
12 way Vertical model TPN MCCB DB with following components. a. 100 A TPN MCCB with overload, short circuit, earth fault and earth leakage release with adjustible settings - 1 No Incomer b. 32 A TP MCB - 8 Nos c. 10/25 A SP MCB - 12 Nos
Supply
Installation
12 way Vertical model TPN MCCB DB with following components. a. 63 A, 100mA TPN RCBO with overload, short circuit, earth fault and earth leakage protection - 1 No Incomer b. 32 A TP MCB - 8 Nos c. 10/25 A SP MCB - 12 Nos
Supply
Installation
8 Way Horizontal model SPN MCB DB with following components. a. 32A DP, 30mA RCCB incomer - 1 No b. 10A/25A SP MCB - 6Nos
Supply
Installation
Supply and installation of following light fittings of Philips/Wipro/Bajaj make with all accessories like supporting hard ware downrods etc as required to complete the installation in all respects
LED high efficient 4 ft batten type light fitting with CRCA housing, with output >2000 Lumens, Luminaire efficacy of around 110 lm/W, IP20, surge protection of minimum 4KV, driver efficiency >80%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 180-270V AC, Ripple<5%, Electrical insulation class-1.
Supply
Installation
LED high efficient 4 ft batten type light fitting with CRCA housing, with output >4000 Lumens, Luminaire efficacy of around 110 lm/W, IP20, surge protection of minimum 4KV, driver efficiency >80%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 180-270V AC, Ripple<5%, Electrical insulation class-1.
Supply
Installation
Circular LED light fitting with lumen output>100 lumens, CCT>6500K, IP20, with inbuilt surge protection, CRI>80, CCT-5700K, voltage range 180-270V AC.
Supply
Installation
Supply and fixing of batten holder with connection complete with all accessories.
Supply
Installation
LED flood lights with lumen output >7000 Lumens, Luminaire efficacy of around 110 lm/W, IP65, surge protection of minimum 4KV, driver efficiency >90%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 180-270V AC
Supply
Installation
Supply and fixing of 230V AC rechargeable bulbs with lumen output > 800Lumens with 4 hours battery back up with conventional holder to be fitted on to existing lamp holder excluding the cost of lamp holder.
Supply and fixing of 230V, 1200mm sweep Energy efficient 5 star rated BLDC ceiling fans with required downrods and all required accessories. Warranty: 2 Years Makes: CG HS, KHAITAN URJA, ORIENT ELECTRIC ECO TECH, BAJAJ ENERGOS, USHA ENERGION 32
Supply
Installation
Supply and fixing of 300mm sweep Single phase heavy duty industrial exhaust Fans with air delivery > 1100 M3/Hr with all required supports and accessories Makes: ALMONARD, BAJAJ, CG, USHA, ORIENT, KHAITAN, MARATHON
Supply
Installation
Supply and installation of Legrand/ Hager/Siemens make 32 A 3pole, Earth and Neutral Metal clad power socket with 32A MCB control including plug top.
Supply
Installation
Supply and installation of Legrand/ Hager/Siemens make 25 A 2pole & Earth Metal clad power socket with 25A MCB control including plug top
Supply
Installation
Supply and installation of Legrand/ Hager/Siemens make 20 A 2pole & Earth Metal clad power socket with 25A MCB control including plug top for Geyser points. The MCB with its enclosure box should be flush mounted at a operating height outside toilet and socket shall be flush mounted near to geyser inside the toilet in wall by chipping along with required conduits.
Supply
Installation
Supply and installation of Legrand/ Hager/Siemens make 20 A 2pole & Earth Metal clad power socket with 25A MCB control including plug top for AC points. The MCB with its enclosure box should be flush mounted at a operating height and socket shall be flush mounted near to AC, concealing conduits in wall by chipping long with required conduits.
Supply
Installation
Supply and installation of PVC modular switch boards along with required face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Colour of the switches and sockets/frame shall be Grey colour. Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO
12 modular, 2mm thick, CRCA powder coated switchboards with 6 Nos 6A Switches, 3 Nos single module electronic Fan regulator.
Supply
Installation
8 modular switchboard with 7 Nos 6A Switches, 1 Nos single module electronic Fan regulator.
Supply
Installation
8 modular switch board with 8 Nos 6A Switches
Supply
Installation
3 modular switch board with 3 Nos 6A Switches
Supply
Installation
2 modular switchboard with 6A two way switches
Supply
Installation
6 modular switchboard with 2 Nos 6A Switches and 2 Nos 6A universal shuttered Sockets
Supply
Installation
3 modular switch board with 1 Nos 16A Switc and socket
Supply
Installation
3 modular switch board with 3 Nos of 16A Modular MCBs
Supply
Installation
Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed PVC conduit/channels with ferruling on both ends excluding cost of pipes, channels and switch boards. Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED
Point wiring with 3 runs of 4 Sq.mm wire from DB to metal clad sockets for AC and geysers. Approximate average length of circuit: 22 M
Point wiring with 3 runs of 4Sq.mm wire from DB to metal clad sockets for AC and geysers Approximate average length of circuit: 12 M
Primary Point wiring with 3 runs of 2.5 Sq.mm wire from DB to lighting switch board. Approximate average length of circuit-25 M
Primary Point wiring with 3 runs of 2.5 Sq.mm wire from DB to lighting switchboard. Approximate average length of circuit-15 M
Secondary point wiring with 3 runs of 2.5 Sq.mm wire from lighting switch board to power sockets. Approximate average length of circuit-5 M
Primary point wiring with 3 runs of 1.5 Sqmm wire from lighting swithboard to first light fitting or fan Approximate average length of circuit-5 M
Secondary point wiring with 3 runs of 1.5 Sqmm wire from fitting to fitting Approximate average length of circuit-3 M
Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches with all accessories Make: Polycab / Universal / Torrent / RPG / KEI.
4c 10 Sq.mm Cu cable
Supply
Installation
3c 2.5 Sq.mm Cu cable
Supply
Installation
Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty glands, heavy duty long neck copper lugs etc complete Make of glands/ Lugs: Dowells/Jainson/HMI/Comet
4c 10 Sq.mm Cu cable
3c 2.5 Sq.mm Cu cable
Supply and installation of 300 mm width, 50mm height with minimum 2mm thickness GI perforated cable trays along with tray cover
Supply
Installation
Supply,installation,testing & commissioning of maintenance free earthing system & associated works, etc. complete as per specifications & instructions of E-I-C. A. Providing and making earth station comprising of >= 17 mm dia 3m long earthing electrode of high tensile low carbon steel rod molecularly bonded 250 micron copper coating on the outer surface, UL listed, filling bore with suitable earth enhancement compound as per IEC 62561-7 & manufacturer's standard, surrounding the earth electrode complete with all required materials & instructions of EIC. Note: The scope includes :- 1) Installation of earth rods including making pit/ drilling suitable size bore holes in normal soil/ hard rock as per manufacturer's recommendations & design. 2) Exothermic welding of joints between earth electrode & GI / tinned Cu strips, used for interconnection of earth electrodes. B. Providing & making concrete chamber (1:2:4) of size 600 x 600 x 600 mm (inside dimension) with 10 mm thick MS hinged cover mounted on 40 x 40 x 5 mm thick angle iron frame, 50 x 6 mm & 150 mm long GI equipotential bar mounted inside chamber as per instructions of EIC. (For housing Equipotential bar) Note: The date of testing and earth resistance value shall be written on the cover with black base with yellow paint. Make of earth pits: OBO/ERICO/JEF
Supply, installation, testing & commissioning following heavily hot dipped GI earth strip for ground conductors fixed with no.10 GI wood screws & 1-2 mm thick GI saddles with G.I machine screws or in ground at 750mm below, interconnection of earth strip with welded joints and GI nut bolts & washers, painting with two coats of metallic Aluminium paint for above ground portion & painting with two coats of black bituminous compound for earth strip in ground etc. all as per drawing, specifications and as per the instructions of the Engineer-in-charge. Note excavation for this item measured seperately & conductor used as down conductors. Note: Galvanization shall be witnessed before supply of material at manufacturers works
50 X 6 mm GI strip Note For interconnecting the earth pits
25 x 6 mm hot dip galvanised GI strip for lightning protection at a height of 12m by clamping on the walls/columns with insulators, clamps and all required hardware.
Supply and fixing of 100 mm X 25 mm anodised Aluminium cable tags engraved on black back ground with name of the load along with required hardware for fixing the lables on to the cables.
Supply and installation of panel front rubber mats of size 2 Mts x 1 Mts with 2 mm thick as per latest IS 15652:2006
Supply and installation of 100mm NP2 class hume pipes with required couplers for road crossing of cables
Supply & pulling of 2 pair 0.5mm telephone cable in already laid PVC conduit/trunking with required accessories etc to complete the job. (Delton/Finolex/Polycab make)
Supply and installation of 10 pair telephone junction boxes with ADCKRONE make out door box, back mounts, LSA plus disconnection module 2/10 connectors with identification markings and other acceessories and hardware for mounting suitable for terminating 20 pair, 0.5 Sqmm wires. The rate should also include termination of both in coming and out going cables to the junction boxes.
Supply & Installation of 2 modular surface mount Information outlet with Face Plate & Surface mount Box, RJ 11 jack/socket, required fixing hardware & accessories for completing the work including 2 pair telephone cable end termination in RJ 11 jack with ferulling as per relevant IS/ANSI/TIA/EIA standards. Make: D-link/Legrand/Havels
Supply and installation of T.V. point wiring complete with supply and pulling of RG-6 solid co-axial copper conductor cable from splitter in ground/terrace floor to each TV point in already laid 25mm dia PVC (HMS) conduit in slab/wall with all conduit accessories, suitable pull boxes/junction boxes, complete with modular T.V. socket outlet in modular boxes etc as required with connections at both ends all as per the instruction of E.I.C Approximate length of circuit - 40M
Supply, installation, testing & commissioning of pressure type 20 litre capacity storage type (Horizontal mounting) water heater to work on 230 V AC supply with 2000 W heating element complete with all accessories, ISI mark, BEE min 4star rated with MS polymer/glass rust proof coating inner container and ABS plastic outer body, PUF insulation between inner & outer container, thermostat , thermal cut out, pressure release valve, 3 Cx 2.5 sq.mm PVC insulated stranded copper chord for interconnection between water heater to junction box, connector, flexible pipe of suitable size for inlet and outlet water connection etc . Scope includes M.S supports fabricated out of 25 mm x 5 mm thick M flat with 2 coat of red oxide and 2 coats of enamel paint fixed on wall with 4 nos. of No. 10 nettle fold screws in wall with nylon/phil plug & all mounting accessories including connection with suitable lugs, all as per specificaiton and instruction of E-I-C. Note: Sample water heater to be submitted for approval.
Supply and installation of 25 mm dia 1.8 mm thick medium duty Sudhakar/AKG make electrical PVC conduits confirming to IS with accessories like bends, couplers etc in roof slab, wall including chasing of wall fixing the conduits and filling the chase with wire mesh, cement mortar and making good of the surface etc complete. Note: 1. GI wire shall be laid all through the conduit length to enable pulling of wires. 2. Based on the preliminary drawing attached, detailed conduit drawing is to be submitted by the contractor for approval of the department before execution of the work.
Supply
Installation
Supply and installation of 25 mm dia 1.8 mm thick, medium duty Sudhakar/AKG make PVC Junction boxes in wall including chasing of wall, fixing the junction box and filling the chase with cement mortar and making good of the surface etc complete
Supply
Installation
Supply and installation of Sudhakar/AKG make 25 mm dia 1.8 mm thick, medium duty PVC Deep junction boxes in slab
Supply
Installation
Supply and installation of 150 mm dia MS fan boxes with minimum 10mm dia MS hook for supporting the fan on to the ceiling with suitable cover
Supply
Installation
Supply and Installation of 16 guage sheet steel switch board boxes of following sizes by concealing including chasing of wall and filling the gap with cement mortar and making good of the surface etc complete excluding the cost of conduits Make: Legrand or similar
2 module
3 module
6 module
8 module
12 module
Description of Work / Item(s)
Amount
CIVIL WORKS
ELECTRICAL WORKS
SANJEEV BROTHERS
JYOTI SARUP MITTAL
Durga Impex
SANJEEV BROTHERS
SANJEEV BROTHERS
JYOTI SARUP MITTAL
stage.html
html • 0.02 MB
finance_811967.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .