Construction of new district Jail Bhaderwah by way of construction of toilet block inside district Jail Bhaderwah

Amount

Earthwork in excavation by mechanically / manual means over areas (exceeding 30 cm in depth, 1.5 Mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposal earth to be leveled and neatly dressed all kinds of soil.

Providing and laying in position cement concrete of specified grade in 1:4:8 (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size) excluding the C/o centering and shuttering all work upto plinth level including curing and all carriages and cost of materials involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) crushed agg. including curing complete including curing and all carriages and cost of materials involved. complete Job

Brick work with FPS bricks of class designation 75-A in super structure upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including curing and all carriages and cost of materials involved upto site of work complete.

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete.

15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including curing and all carriages and cost of materials involved.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer. including all carriages and cost of material involved.

Finishing walls with exterior emulsion paint of approved brand and manufacture to give an even shade including priming coat with cement primer (two or more coats). New work (APEX or equivalent)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Including curing and all carriages and costs of material involved.

Supply and filling of stone boulder under floors incl watering, ramming and dressing incl all carriages, leads and lifts complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats . including applying priming coat with ready mixed pink or grey primer finishing with knifing grey paste filler of approved brand and manufacture . (New work)

Structural steel works welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including all carriages and cost of material involved.

Providing corrugated G. S. sheet roofing including vertical / curved surface with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surfac) excluding the cost of purlins, rafters and trusses. 0.63mm thick with zinc coating not less than 275gm/m2. Including all carriages and cost of material involved.

Wiring for light point/ fan point / exhaust fan point/ call bell point with 10 Sq.mm. FRPVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable G I box and earthing the point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc as required Anchor LMR (Group-B) LMR

Wiring for circuit / sub main wiring along with earth wire with the following size of FR PVC insulated copper conducted single core cable recessed medium class PVC conduit as required Anchor/ Finolex/ Polycab/ Havells/ R R Kabel/ KEI make.

2.25 + 1x2.5 Sq.mm earth wire (1.14.2)

Providing and fixing of LED bulbs (09 watt) fitting with connection etc as required (LMR).

Providing and fixing of Angle /batten holder with connection required etc (DSR-2102)

Providing and fixing of service line 10mm and Genset line.

Constructing brick masonry manhole in cement mortar 1:6 (1 cement : 6 course sand) with RCC top slab with 1:2:4, foundation concrete 1:4:8 mix ( 1 cement: 4 course sand : 8 graded stone agg. 40mm nominal size) inside plastering 12mm thick cement mortar 1 : 3 ( 1 cement : 3 course sand) finishing with floating coat of neat cement slurry of size 45x45x45cm complete and making channels in cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone agg 20mm nominal size) complete. Including all carriages and cost of materials involved.

Providing and fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing of C P Bib cock short body heavy (Standard Make)

Providing and fixing of C P Bib cock long nose heavy (Standard Make)

Providing and fixing of C P Angle Valve heavy (Standard Make)

Providing and fixing of C P gratings (Standard Make)

Providing and fixing of PVC Connection (Standard Make)

Providing and fixing of following size of PVC (Prince/ Supreme or equivalent make) Pipe and fittings including cost of (B-type specified adhesive).

150mm dia pipe

100mm dia pipe

100mm dia plain bend

75mm dia Door bend

Floor trap 100x75mm

Door bend 100mm

Door Tee 100mm

75mm dia pipe

20mm dia Ball value

20mm dia Union

Providing & Fixing of following G.I fittings /pipes B-class complete job. Prakash surya or equivalent.

15mm dia G I pipe

20mm dia G I pipe

P/F wash basin with C.I. / M.S. brackets, 15mm C. P brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Providing, fixing and Installation of water heater (Gyser) capacity 35 ltrs of approved brand / make including all fittings complete.

Providing and fixing of 200mm exhaust fan of approved make including connection testing complete.

Mushtaq Ahmad Renzoo