PROVN OF TOILET NEAR BLDG. NO AT-5 AND AT-8 OF 58 GTC, PROVN OF ORTHOPANTOMOGRAM (OPG) MACHINE ROOM MDC HAPPY VALLEY SHILLONG, PROVN OF SHED IN OFFRS MESS LAWN OF 58 GTC, PROVN OF 05 X BUS STAND NEAR MD ACCN AT 58 GTC AND PROVN OF TILLING IN LIEU OF

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

M&L for Hard core, broken stone /boulders to gauge n exc 63 mm size , deposited , spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.50 M above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed.

M&L for PCC 1:4:8 Mix, type D-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone agg) as in hardstanding /path / plinth prottection incl finishing even & smooth without using extra cement complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles 450X 300X 7mm thick as in vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces complete all as specified and directed.

M&L for RCC precast cover slab using cement concrete 1:2:4 Mix, type B1 (using 20mm graded crushed stone aggregate) set in CM (1:6) including necessary form work complete all as specified and directed. Note: Reinforcement shall be measured separately.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape etc as required and binding with and including MS wire (annealed) not les than 0.9 mm dia as in reinforcement complete all as specified and directed.