CERTAIN SANCTIONED WORKS AT MARRIED ACCN BLOCKS OF VVRA AND DMDE COMPLEX

Amount

Demolition of plain cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land.

M&L for 50 mm thick plain Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

Dismantling floor to earth and filing including backing laid in cement mortar M&L for light colored Double charged vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM (1:6) Set and jointed in neat cement slurry and pointed in white or colored cement to match the shade of the tiles. (Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects) Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed

Ditto as item no 3 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of Premium emulsion paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 including preparation of walls / ceilings and wipe it clean complete all as specified and as directed by Eng-in-charge.

M&L for preparation of old painted steel/iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar (1:6) complete all as specified and directed.

M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar (1:6) complete all as specified and directed.

Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and threading as directed including demolition and use and waste of form work. .

Raking out joints to square rubble masonary, coursed or uncoursed and M & L for Raised pointing in CM 1:3 complete all as specified and as directed.

M&L broken glass coping 25mm thick in CM 1:3 on top of wall including demolition of old coping complete all as specified and as directed.

M&L for preparation of old plastered surfaces and applying two coats of antifungal exterior paint as per manufacturer’s instructions over a coat of true care exterior wall primer complete all as specified and as directed by Eng-in-charge.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and countersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed

M&L Preparation new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified.

Sri Associates (BID ID -3214732)

M/s GM Constructions (BID ID -3214235)

SUN LIGHT HOUSE (BID ID -3214709)

SRI SAI ENTERPRISES (BID ID -3214819)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3214689)

CHARAN ELECTRICALS (BID ID -3215480)

hari enterprises (BID ID -3215555)

MOHAMMED GHOUSE (BID ID -3215651)

Anjana corporation (BID ID -3215055)

Ravi Enterprises (BID ID -3215370)