BIRED/04/e-NIQ(1st call) of 2025-2026

Amount

SUB-HEAD 1--DISTRIBUTION WIRING. Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/Mescab/RR/Gloster) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire do---do---do on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]. Average run 8 Mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/Mescab/RR/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Make: Anchor Roma/ Legrand Mylinc/ Crabtree) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board .

SUB-HEAD 2--CUTTING CHANEL & WIRE LAYING. Cutting channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge polythene pipe dia as stated below, by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire as per GS. i) 13 mm dia 3 mm thick.

ii) 19 mm dia 3 mm thick.

iii) 25 mm dia 3 mm thick.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. i) 20 mm size

ii) 25 mm size

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/Finolex/Mescab/RR/Gloster) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. i) 3 x(1.5 sqmm)

ii) 2x(2.5sqmm) + 1x(1.5sqmm) as ECC

iii) 2x(4 sqmm)+1x(2.5 sqmm)

iv) 2x(6 sqmm) + 1x(4 sqmm) as ECC

v) 4x(10 sqmm) + 2x(6 sqmm) as ECC

vi) 4x(16 sqmm) + 2x(10 sqmm) as ECC

Supplying & laying 4x50 sq. mm.single core multistrand FR PVC insulated flexible Cu wire in suitable size of PVC flexible pipe (reinforced) from Kit-Kat fuse to SFU and SFU to bus bar as required including fixing of suitable size socket.

Supplying & Fixing solderless Copper socket by crimping of Copper wires. a)1.5 sq mm

b) 2.5 sq mm

c) 4 sq mm

d) 6 sq mm

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. i) 150 mm x 100 mm x 65 mm

ii) 200 mm x 150 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required i) 150 mm x 100 mm x 65 mm

ii) 200 mm x 150 mm x 65 mm

SUB-HEAD 3--PLUGS, SOCKETS & A.C POINT Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Make: Anchor Roma/ Legrand Mylinc/ Crabtree), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make: Anchor Roma/ Legrand Mylinc/ Crabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 6 module

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Make: Anchor Roma/ Legrand Mylinc/ Crabtree), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V 6 A Modular type switch (Make: Anchor Roma/ Legrand Mylinc/ Crabtree) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Make: Anchor Roma/ Legrand Mylinc/ Crabtree), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Make: North-West/ Legrand / Crabtree) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make: Anchor Roma/ Legrand Mylinc/ Crabtree), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug top with indicator (Make: Anchor Roma/ Legrand Mylinc/ Crabtree) & necy. Connections.

SUB-HEAD 4--VTPNDB, HTPNDB, SPNDB, S.F.U, C/O,Bus-Bar etc. Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS as per direction of EIC. 8 Way ( Up to 160 A ) Make - Seimens, Enclosure (607914) /Siemens/Schneider/L&T,Enclosure or equivalent cat of SIEMENS as approved by E.I.C]

Supplying and fixing double-door Horizontal TPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. i) 4 Way[ Legrand ]

ii) 6 Way[ Legrand ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. i) 2+8 Way [ Legrand ]

ii) 2+12 Way [ Legrand ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand / Schneider/L&T/Siemens) as per direction of EIC] 125 A

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ] i) 63 A FP

ii) 40 A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. i) 6-32 SP

ii) 32 A TP

iii) 63 A TP

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make: L&T/Havells) 160 A

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical / SPNDB enclosure with IP-42/43 as per GS. 4/6/8/12 Way (Vertical )

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make- L&T] i) 200 A

Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting. 200/250A

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991). 4 BARS Dimension of Cu. bars 4 x 20x5mm & Dimension of Sheet Metal Box 500x150mm. 200A

Kit Kat type 3 nos cut out fuse with fuse carrier & 1 nos neutral link Material: Strong Porcelain and Pure Copper & Brass Component and fixing on 6mm thik bakelite sheet. 200 Amp 415 Volts.

SUB-HEAD 5--FIXING OF LIGHT FITTINGS. Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling as per GS.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps as per GS.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

SUB-HEAD 6--SUPPLY OF INTERNAL LIGHT FITTINGS. Supply and delivery of twin Industrial type LED luminaries with aluminium extrusion heat sink incl. Supply of 2nos. 18W LED Tube with LED Batten. [Make- SURYA , 2xT-8 cat no.- SLE TL DS 18 P AL EXT & SUB 218 T8 LED or equivalent Magik/ Philips/ CG / Bajaj / Wipro/Havells) (With 3 yrs Warranty)

Supply and delivery of Single Industrial type LED luminaries with aluminium extrusion heat sink incl. Supply of 1nos. 18W LED Tube with LED Batten. [Make- SURYA , 1xT-8 cat no.- SLE TL DS 18 P AL EXT & SUB 118 T8 LED or equivalent Magik/ Philips/ CG / Bajaj / Wipro/Havells) (With 3 yrs Warranty)

Supply of 10 W New geration energy saving LED Bulkhead mode up of aluminium housing with diffuser Incl. necessary connections as per direction of EIC. [Make- SURYA , cat no.- SLE BLH 10W PLUS or equivalent Magik/ Philips/ CG / Bajaj / Wipro/Havells) (With 3 yrs Warranty)

Supply of 14W LED bulb (Magik/surya/ Bajaj/ CG/ Philips/ wipro) on existing batten holder

SUB HEAD 7- Out Door LIGHT & CABLE LAYING Supply & Fixing of 240V, 45 W LED street light with system output of 120 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with all accessories (Make- Surya, cat no.- SLE UL 45W IP66 LXN G1 or equivalent model of Philips/Wipro/Magik/CG) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (With 3 yrs Warranty)

Supply & delivary of 1.1KV grade 3 core 10 sq. mm. multy stranded alluminium conductor Armoured cable. [from Substation building Tto security light] [Make- Gloster/ Havells / Polycab/ KEI/RR Kabel].

Supply & Fixing compression type gland complete with brass gland, rubber ring for dust & moisture proof entry and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 Core 10 Sq. mm

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed ojected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supplying and fixing waterproof & dustproof PVC (Poly Carbonate, SMC/FRP) cable loop box[Syntex/similar] having thickness 4-6 mm comprising Neutral Link on DIN rail, 2 Pole 6 A MCB, 4way TPN Connectors Color Red with rubber gasketted, metalic hinged PVC Door or cover with brass machine screws etc., earthing terminal with lug, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. incl. Inter connection with suitable size of copper wire including painting with anticorrosive paint as required / As per Choice of EIC. (300x250x100)mm

Supply & delivary of 1.1KV grade 4 core 70 sq. mm. multy stranded alluminium conductor Armoured cable. [frombus bar to 2nos. VTPN DB ] -[Make- Gloster/ Havells / Polycab/ KEI / RR Kabel].

Supply & Fixing compression type gland complete with brass gland, rubber ring for dust & moisture proof entry and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 Core 70 Sq. mm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting .

SUB-HEAD 8--FIXING OF FANS. Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification as per GS

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board as per GS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Engraving the deptt. number with 10 mm lettering on the body as per GS.

Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. For 23 cm (9") Exhaust fan.

For 30 cm (12") Exhaust fan.

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long). For 23 cm (9") Exhaust fan

For 30 cm (12") Exhaust fan.

SUB-HEAD 9--SUPPLY OF FANS. Supply of 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS (Make - Crompton High Speed or equivatent model of orient, Usha) (With 2 yrs Warranty)

Supply of 450mm sweep wall bracket fan(high speed) with metal body & blades(Make -EPC. Cat No.-Tempest or equivatent model of Crompton, orient, Usha) (With 2 yrs Warranty)

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) i) 9" ( 230mm ) Speed 1370 RPM

ii) 12" ( 300mm ) Speed 1420 RPM

SUB-HEAD 10 -- EARTHING Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Extra for treatment of soil by using salt & charcoal or coke for plate electrode .

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS. No.-4 SWG

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Dismantling charges of existing items i.e. old plug Board, wire, lights, Fans etc. and handing over hospital authority.

N.B: i) Payment will be made after availability of fund from concern Department. ii) Payment will be made as per P.W.D norms.

MUKHERJEE LIGHT DECORATOR (BID ID -6413353)

NIRMAN ENTERPRISE (BID ID -6413244)

M/S SWAPAN KUMAR CHOWDHURY (BID ID -6412680)

MS K. K. GHOSH and CO. (BID ID -6418327)