PROVN OF TWO TOILETS AT BLDG. NO P-34, SPECIAL REPAIR

Amount

Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling surface channel and similar work complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F Pre- painted galvatume aluminum SMP coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide primer. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel Rolled sections Fe 410-W (Gde-E- 250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as required complete all as specified and as directed.

Demolition of brick work/stone bulder measonary built in cement mortar or cement lime mortar of any description and in any position all as specified.

M&L for brick work in CM (1:4) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6) ( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site complete all as specified and as directed.

Excavation in trenches, in any type of soil n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and as directed.

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified.

Removing excavated material to a distance exc. 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW, PVC or AC) upto 150 mm dia jointed in cement mortar complete all as specified and as directed.

M&L SGSW drain pipes 150 mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed

M&L cement concrete bed (1:4:8) type D-2 using 40mm graded stone aggregate as in bedding to SGSW pipes 150mm dia to drain pipe including formaing cradels in complete all as specified and as directed.

Dismantling floor, hearth or wall tiling and stone slab any type including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic tiles ultra charged (dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but n.exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified. Make : Kajaria or Equivalent.

Allas per Srl item No. 20 here-in-before but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified. Make : Kajaria or Equivalent.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter and spacer concept in matching pattern of size 1200 X 600 X 8 to 10 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed. Make : Orient Bell, Kajaria or Equivalent.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L 15mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in 10 mm thick slected quality toughned glass cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. Make - Modi, saint gobin or equivalent.

M&L for prepration of new/Old plastered surfaces of wall/ceiling and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.

M&L for preparing New/Old plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M&L for preparing New/Old plasteres surfaces wall/ceiling and applying of Birla/JK white wall care putty approx 2 mm thick on ceiling as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer on ceiling complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 20 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed

M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 in brick or stone wall , cutting not exc 10cm girth complete all as specified and as directed.

S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC

S&F 15 mm bore brass CP single lever Basin mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make : Jaquar Cat Part No. OPL-15011B/Cera Cat No F3001461/ Somany Cat No 220912/Hindware F-330014CP / Essess or equivelent.

S&F in repair vitreous china wash basin over counter ovel type size 600x425x195mm jaquar, hindware or eqvilent fixed over granite slab with all fitting and fixture complete all as specified.

S&F in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.

S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover2356 and 2238 twin flush fitting of Cera , hindware , jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed.

S & F CP Toilet Paper holder with flap guard complete all as specified and directed Make Cera Cat No F5003110/Somany Cat No 230507/Hindware F-880003 / Essess or equivelent.

S & F CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed Make Hindware Cart Part No F160001/Marc Cat No MAC-3052 Cera Cart No F8030103 / Essess or equivelent.

M&L for 16-18 mm thick Granite 'Z'Black /any other approved shade (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in CM (1:4) complete all as specifed and dircted .

S&F CP towel rail 600mm long complete all as specified and as directed

S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed

S&F CP towel ring complete all as specified & directed Make : Cera Cat No 5004105/Hindware Cat No 880007, Somany Cat No 230703 / Essess or equivelent.

S&F in repair for 15 mm dia fancy type CP concealed type Stop valves, Cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches etc complete all specified and directed.

Supply and fixing 75mm bore SWR pipes single socketed in any length with rubber ring joints laid in ,floors, trenches or fixed to wall etc complete all specified and directed.

Supply and fixing PVC (SWR )bends (any radius) 110mm complete all as specified and directed.

Supply and fixing PVC (SWR ) bends (any radius) 75mm bore complete all as specified and directed.

S&F 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed.

S&F CP Brass soap dish complete all as specified & directed Make Hindware Cat No F880011/Cera F5003106.

S&F wall mounted Soap dispenser touch free, hand soap dispenser of Model code - DSDR 0112 - S of volume - 1100 ML with liquid output 1.50 ML to 2.00 ML made of 316 stainless steel with automatic induction 3 - 10 CM or equivalent complete all as specified and as directed.

S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed complete all as directed

S&F in repair sheet glass shelf assembly consisting of .mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F 15 mm bore 2 way angel valve with wall flange complete all as specified & directed Make Somany Cat No 220909/CERA Cat No 2008211, MARC MJN-1410 / Essess or equivelent.

S&F for Towel Rack with Lower Hanger (Stainless Steel) with hook. Make: Jaquar, Cat I. No. AHS-1581H / Essess or equivelent.

S & F Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two Nos CP Railing in each set complete all as specified and directed Make: Jaquar, Cat I. No. ACN-1173. Cera Cat No F5005103 or equivalent Hindware/Somany.

S&F in repairs wall mixer 3- in - 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,Hand shower 105mm dia round shape single flow with air effective(ABS body and Face plate chromium plated) with rubit cleaning system complete all as spd. (Make Jaquare ) Cat No : FUS- 2928, OHS - 35495, SHA- 549D8, HSH 1775 & Cat No. SHA- 455L400 respectively. / Essess or equivelent.

S&F Top patch (Model No-IPF-2 of make- Insta or equivalent as approved by GE complete all as specified and as directed.

S&F Bottom Patch (Model No-IPF-3 of make- Insta or equivalent as approved by GE complete all as specified and as directed.

S&F Double action floor spring (Model No-IFC-8400 of make- Insta or equivalent as approved by GE complete all as specifed and as directed.

S&F Top Pivot (Model No-IFC- GDP-105 of make -Insta or equivalent as approved by GE complete all as specified and as directed.

S&F Bottom and Top corner patch lock (Model No-IPL- 1 of make- Insta or equivalent as approved by GE complete all as specifed and as directed.

S&F Door handle H type 25x300mm (Model No-IGH- 55 of make. Insta or equivalent as approved by GE complete all as specified and as directed.

M&L for Grinding, polishing /bevelling of edges on 12mm thick toughened glass complete all as specified and as directed.

S&F over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mmcomplete all as specified and directed Make :- CERA –F7010506/ Hindware-240806 / Essess or equivelent.

S & F for Aluminium powder coated windows including aluminum powder coated frames sliding three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double rebated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel wire mesh including all standard fittings, complete all as specified and as directed.

S & F for Aluminum powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Aluminium powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S & F for Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement including taking down existing partition of any type and position complete all as specified and as directed.

S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete including dismantling of existing false ceiling with frame in any position complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 10mm thick screed bed in CM 1:4 complete all as directed.

M&L Machine cut kota stone slab flooring 18-20mm thick laid over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of premium/Ist quality exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of Oil bound distemper complete all as specified and directed.

S&F Mild steel framed work as in grills, gratings etc with end of bars shouldered and or riveted forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, railings, frame work for water tanks and similar works, conforming to Fe 290 Gde E-165, fixed in repair complete all as specified

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 complete all as specified.

M & L for 15mm thick rendering in CM 1:4 mix with WPC or without WPC on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.

Surface excavation not exc 30 cm deep and ave 15 cm deep and getting out in soft/loose soil complete all as specified.

M&L cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) in surface channels and drains complete all as specified & directed

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in foundations, including rafts footings, foundation beams, plinth beams and mass concrete complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in columns, pillars, posts and struts etc complete all as specified and as directed.

M&L for Form work to flat sided of pillars, post,struts columns,square,rectangle or polygonal etc. rough finished surfaces complete all as specified & directed

M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band , cantilever and similar work rough finished surface of concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in as in slabs (roof) supported on walls, beams and columns , landings, and in shelves and the like complete all as specified and directed.

M&L for Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished rough and even complete all as specified and directed.

M&L for Form work to edges of concrete flat,treads,breaks in floor window cills concerte railing,opening in conmcrete walls, floor and roof and similar work exc. 10cm but not exc. 20cm wide complete as all specified & directed

M&L for reinforced cement concrete M-25 (20 mm graded aggregate) design mix concrete as in Chajjas and the like complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L for 40mm thick DPC in cement concrete(1:2:4) B-type(12.5mm graded aggragate) to horizontal & vertical surface including necessary form work and complete all as specified & directed.

M&L for Polythen film 50mm thick micron laid with a coat of bitumin primer @0.30to 0.50 Kg per Sqm on DPC complete all as specified and directed.

S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F MS TMT steel bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in floor sub base complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 X 250/450 x 350X 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

M&L earth filling under floor/ floor finishes including spreading and levelling in layers not exc 25 cm thick for well ramming including watering as required complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge not exc 63mm, deposited, spread and level in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.(75 mm. thick.hardcore n.exc 63 mm. )

Supply only Liquid water proofing compound complete all as specified and directed.

S&F PVC (SWR) reducers all specified & directed 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl all specified & directed 110 mm dia complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type all as specified & directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified & directed

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

M & L for rendering 15 mm thickcement mortar screed bed in CM 1:4 over PCC bedding with water Proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed.

M & L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumin painting with hot blown grade bitumin 85x25 @ 1.20Kg/ Sqmtr and laying of APP based polymetric membrane minium weight 3kg/ sqm and minium 3mm thick reinforced with polyster non wove febric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed.

M&L for preparation and applying two coats of aluminium paint over APP based polymetric membrane with required finishes complete all as specified and as directed.

M&L PCC Type C1 20mm graded 1:3:6 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.

S&F vitreous china urinal of of cat No. URS - WHT - 0704 of size 710 x 485 x 300 mm with Sensotronic sensor SNR - CHR - 51097 flushing valve for urinal with complete kit of make jaquar , Cera and Hindwarw and equivelent with all fitting and fixture complete all as specified.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

S & F Stop valves 20mm Dia, but fancy type, chromium plated with long shank and cup chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket, light fittings etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete all as directed.

Material and labour of point wiring complete with1.5 Sq mm (nominal area) FRLS PVC insulated unsheathed and multistranded copper conductor cable ISI marked drawing through existing concealed conduit, with existing modular box and cover for fixing modular switches/sockets etc and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly for one light point / fan point/bell point controlled by one 1-way switch complete all as directed .

All as per srl item no. 125 here-in-before but with for One 3 pin socket outlet 5 amps on the same board complete all as directed.

All as per srl item no. 125 here-in-before but for one 3pin socket outet point 5 amps on the independent board..

All as per srl item no. 125 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed.

S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.

S & F Modular Fan regulator step type ,120 watts complete all as directed.

Taking down of ceiling fan any type and size ,dismantling blades etc & Including deposited to MES store yard.

Supply and fixing ceiling fan complete with blades, down rods,suitable for regulator and accessories, 230 V, 1200mm sweep (BLDC) complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 230 volts, 5 Amps complete all as directed.

Supply and fixing in replacement electric bell of DINGDONG type, 230 volts, single pole and making all necessary connections complete all as directed.

Supply and fixing in replacement Modular AC Socket box including socket and with 25Amps SP MCB, 230 Volts, 50Hz. Complete.

Supply and fixing LED mirror light fitting 10 watt and making all electric connections complete all as directed.

Supply and fixing LED ceiling light fitting 12 watt, in round shape, recessed/surface type and making all electric connections complete all as directed.

Supply and fixing LED ceiling light fitting 15 watt, in round shape, recessed/surface type and making all electric connections complete all as directed.

Supply and fixing LED tube light fitting, 20/22 watt ,230V wall mounting type and including all electric connections complete all as directed.

Supply & fixing in replacement of ventilating fan of size 250m sweep plastic body including louver and making all electric connections complete all as specified and directed.

Supply and fixing of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed.

S&F of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.

S&F of 5/6 watt LED bedside light ,warm white complete all as specified and directed.

Supply and fixing in replacement of Flexible LED tubelar , cool/warm white , and making all electric connections complete all as directed.

Supply and fixing of adopter AC to DC suitable for tubelar LED light complete all as directed.

S & F Modular white cover plate with frame 2 Module complete all as directed.

S & F Modular white cover plate with frame 3 Module complete all as directed.

S & F Modular white cover plate with frame 6 Module complete all as directed.

S &F Modular white cover plate with frame 12 Module complete all As directed.

Supply and fixing 20 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.

Supply and fixing 25 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.

S&F in replacement of MCB, single pole, 6 to 32Amp, C curve type 10 KA, 240 Volt. making all electric connections complete all as specified and directed.

S&F in replacement of MCB, SPN, 40 TO 63 Amp, C curve type 10 KA, 240 Volt. complete all as specified and directed.

Material and labour in replacement submain wiring complete with 2 x 16 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Material and labour in replacement submain wiring complete with 2 x 10 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Material and labour in replacement submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Supply and fixing of Geyser 25 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for inlet and outlet upto stop cock including complete all as specifed and directed.

M&L earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Supply and fixing in replacement of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in street light fitting bracket, 1mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, complete all as directed.

Taking down of hylem sheet any size with switch/socket/fan regulator complete all as specified and as directed.

Taking down of rusted sheet metal box any size/type complete all as specified and as directed.

S&F of Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed.

S&F of Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed.

S&F Modular Metal Flush Box 6/8 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed.

S&F of Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed.

S&F of Modular white cover plate with frame 8 module all as directed

S&F of Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

S&F LED Iin replacement of energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S & F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

S & F in replacement of MCB C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed.

S & F in replacement of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.

S & F PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed.

S & F geyser 50 ltr capacity vertical type with steel tank and glass inner linen including fastners (4 Nos) for hanging and CP and PVC connection for inlet and outlet water connection upto stop cock (Excluding stop cock) complete all as specified and as directed.

S & F single pole and neutral enclosed with a two pin and earth plug and socket with one single pole MCB 20 Amps complete all as specified and as directed.

S & F exhaust fan 300mm sweep metal type, DB including self closing louver and making all electric connection and depositing old u/s to MES store yard complete all as specified and as directed.

M&L cutting/opening of hole through out the wall as suitable for exhaust fan as per site and making good the disturbed surface complete all as specified and as directed.

M&L point wiring with 1.5sqmm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20mm dia medium grade and PVC conduit fittings such as Tee, bends, elebow and FRLS PVC insulated unsheathed 1.5sqmm copper conductor multistranded earth wire, connecting to common earth dolly with and incl metal flush box with cover of suitable size for fixing modular switches/sockets etc for one light point, exhaust fan controlled by one 1-way switch complete all as specified and as directed.

All as per Srl item No 183 here-in-before but for one 3 pin socket outlet 5 amps on the same board with other switches

All as per Srl item No 183 here-in-before but for one 3 pin socket outlet 5 amps on the independent board

All as per Srl item No 183 here-in-before but with 2.5sqmm FRLS copper with 2.5sqmm FRLS copper earth wire for one 3 pin socket outlet on the same board with other switches

S&F LED tube light fittings 12 watt wall mounting type with and including all electric connections with two core PVC insulated PVC sheathed copper conductor flexible cable complete all as specified and as directed.

S&F PVC/CP connection 600mm long with brass adopter 10mm dia with washer for inlet & outlet pipe ISI marked for geyser of any type/make and capacity complete all as specified and as directed.

S&F SPN DB with double door 8 way, 240 V with busbar 200 A rated complete all as specified and as directed.

S&F MCB, SPN 32 Amp C Curve type 10 KA, 240 volt complete all as specified and as directed.

S&F sensor hand drier, 230 volts, 50 Hz connection complete all as specified and as directed.

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sqmm 2core considered for fixing clamps on wall from main DB to DB connection complete all as specified and as directed.

S&F high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.5 HP, 230 volts, single phase, 50 Hz including pressure gauge, pressure switch & connecting accessories of GI i.e. bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as specified and as directed.

M&L point wiring with single core FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5 sqmm alongwith 1.5sqmm earth wire of multistranded copper conductor connected to common earth dolly and drawing through existing concealed conduit pipe and including new modular metal flush box covered with modular plate for mouting modular switches, sockets or fan regulators complete all as specified & directed

All as per Srl item No 194 here-in-before but for one 3 pin socket outlet 5 Amps on the same board

All as per Srl item No 194 here-in-before but for one 3 pin socket outlet 5 Amps on the independent board

All as per Srl item No 194 here-in-before but with 2.5 sqmm FRLS copper wire with 2.5 sqmm FRLS earth wire on independent board

Akhil Enterprises

Akarsha Enterprises