REPAIR REPLACEMENT OF CONVENTIONAL LIGHT FITTING INTO LED LIGHT FITTINGS AND CONNECTED ITEM AT INHS ASVINI UNDER AGE I ASVINI COLABA MUMBAI

Amount

Supply, Install, commissioning and testing of High Intensity type LED based New generation , energy saving, aesthetically designed, reessed mounted , long life COB LED mounted on MCPCB down light of 40 watts rating enclosed in high grade aluminium pressure die-cast housing with heat resistant toughened flat glass suitably gasketed, nominal voltage 140 V - 270 V, 50 Hz, AC heat management compliance with & including high power LEDs luminous efficiency not less than 140 lumen/Watt. Lumens Flux , inbuilt micro controller power supply, easily adjustable for existing roof ceiling including necessary cutting/alteration required in ceiling and dust and water proof cabinet, Effeciency of driver electronic not less than 85 % , power factor of complete fitting not less than 0.90, Lamp life not less than 50000 operating hours with L 70 criterion. Total Harmonic Distortion (THD) less than 15 % Minimum view angle of the LED down , colour Rendering index(CRI) not less than 80,CCT 5500K-6500K, Ratio of minimum and average illumination shall be minimum 0.3, Working Temperature-30 C to 60 C, Working Humidity 10% to 90% RH and connecting with and including one run of 2.5 Sqmm 3 core PVC insulated, weather proof, multistranded copper conductor cable including taking down old U/s light fitting complete all as specified & directed by Engr-in-charge

Supply, Install, commissioning and testing of High Intensity type LED based highbay robust IP 65 protected LED midway with PDC housing suitable for eilingand available in wide beam optics, system efficiency 125 lm/W to 130 lm/W LED luminaire with high efficiency light of 80 watts rating enclosed in high grade aluminium pressure die-cast housing with heat resistant toughened flat glass suitably gasketed, nominal voltage 140 V - 270 V, 50 HZ, AC heat management compliance with & including inbuilt micro controller power supply, easily adjustable for existing roof ceiling including necessary cutting/ateration required in ceiling and dust and water proof cabinet, Effeciency of driver electronic not less than 85 % , power factor of complete fitting not less than 0.90, Lamp life not less than 50000 operating hours with L 70 criterion. Total Harmonic Distortion (THD) less than 15 % Minimum view angle of the LED not less than 120 degree , colour Rendering index (CRI) not less than 80,CCT 5500K-6500K, Ratio of minimum and average illumination shall be minimum 0.3, Working Temperature-10 C to 45 C, Working Humidity 10% to 90% RH and connecting with and including one run of 2.5 Sqmm 3 core PVC insulated, weather proof, multistranded copper conductor cable of 1100 Volts grade including taking down old US light fitting complete all as specified & directed.

Material & labour for sub main wiring in surface/ recessed as per site requirement with two single core PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard cable of size 1.5 Sqmm drawn through and including PVC casing capping 25mm x 12mm / 32mm x 12mm including all accesssories (ISI marks) and PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard cable of size 2.5 Sqmm as earth continuity and connected to common earth dolly including taking down old submain wiring complete and making good the disturbed surfaces as per existing complete all as specified and as directed. Note:- i) One run of PVC casing capping 25x12mm/32x12mm, three run of 1.5 sqmm copper conductor cable shall be measured and paid as one unit.

Material & labour for sub main wiring in surface/ recessed as per site requirement with two single core PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard cable of size 2.5 Sqmm drawn through and including PVC casing capping 25mm x 12mm / 32mm x 12mm including all accesssories (ISI marks) and PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard cable of size 2.5 Sqmm as earth continuity and connected to common earth dolly including taking down old submain wiring complete and making good the disturbed surfaces as per existing complete all as specified and as directed. Note:- i) One run of PVC casing capping 25x12mm/32x12mm, three run of 2.5 sqmm copper conductor cable shall be measured and paid as one unit.

Supply and fixing in repairs LED street light fitting 20 Watts (lmh 110 lumen/ watt), power factor not less than 0.90 with secondary optics made up of pressure die-cast housing and heat sink in aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK08 and fixed in existing LT pole with suitable fixing accessories complete all as specified and directed.

Supply and fixing in repairs 150 watts (Min 100 lumen/Watt & power factor not less than 0.5) LED Flood light luminaries Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light,suitable for highlighting architectural facade and general purpose lighting and fixed in existing LT pole with suitable fixing accessories complete all as specified and directed.

Supply and fixing in repairs MCB Triple Pole Neutral sheet metal enclosure, double door DB 4 Way (4+12) with 200 Amps rated bus bar for each phase, 415 volts, complete with din rail, Neutral and Earthing bar and making all connections and making good the disturbed surfaces as per existing complete with connection testing and commissioning all as specified and as directed.

Supply and fixing in repairs 415 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of TPN 40 to100 Amp current carring capacity fixed in the DB complete with connection, testing and commissioning all as specified and as directed.

Supply and fixing in repairs 240 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp current carring capacity fixed in the MCB DB complete with connection, testing and commissioning all as specified and as directed.

Supply, laying, commissioning and testing XLPE insulated screened, PVC inner sheathed galvanised steel strip or wire armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm x 3.5 core fixed on wall/ ceiling/ laid in ducts etc including taking down existing cable complete all as specified.

Supply, laying, commissioning and testing XLPE insulated screened, PVC inner sheathed galvanised steel strip or wire armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm x 2 core fixed on wall/ ceiling/ laid in ducts etc including taking down existing cable complete all as specified

Supply and fixing in repairs LED lights fitting 1x 20W, 4 feet, 220V, lumens efficiency 100 lm / W and lamp life not less than 50000 operating hours , AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings including connecting up with three core flexible copper conductor cable complete all as specified and as directed.

Supply and fixing in repairs LED luminaire 600mm x 600mm, 35/36 watt, 220 V, AC, lumens efficiency 100 lm / W and lamp life not less than 50000 operating hours , surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and as directed.

H R Enterprises

AGRAWAL ASSOCIATES

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.

AIRDOT ENGINEERING

Minal Engineers

Ramesh Electrical and Mechanical Works