Special repair to Stn sports section bldg No E31 at AF Stn Memaura

Amount

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down of shutters of any description exc 1.0 sqmtr but n-exc 2 Sqmtr each

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm thick prelam PVC sheet instead of plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed.

S&F factory solid PVC Moulded door shutter with particle board core and 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2mm thick prelam PVC sheet on the back face complete all as specified and directed.

S&F aluminium tower bolts 150mm long, of extraded section.

S&F aluminium handles 125mm long, cast type, anodised.

Supplying and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant all as specified and directed by eng in charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid 2,4,6 panneled moulded door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply & fix mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded agg) for hold fast, cooping,pressed steel frame, benching roof kerbs etc . complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. panel will be of wire gauze .The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmlys complete all as specified and directed.

Supply & fix aluminium anodized barrel tower bolts 200mm long, of extruded section complete all as specified & directed.

S&F 300 mm long ISI Mark aluminium anodized sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

Supply & fix stainless steel butt hinges 100mm long complete all as specified and directed .

S & F 300 mm mild steel ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular section of size 44.45mmx47.62mmx 1.88 mm thick and weight 0.943 Kg/Rm of approved make conforming to IS 733 and 15:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at i.e junctions, Le at top, bottom. and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

S & F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section as under, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Complete all as specified.(a) Style rail – Jindal Section No.4588, 47.62mm x 44.50mm x 1.42mm thick, Wt. @ 0.738 Kg/RM or equivalent. (b) Glazing clip- Jindal Section No.4430, 0.49mm thick, Wt. @ 0.071Kg/RM or equivalent. Note: Glass and other fittings material shall be measured & paid separately.

Supplying and fixing 4mm thick sheet glass ordinary quality, tinted, exceeding 0.50 Sq m in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs of stanless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple all as specified and directed.

S&F Aluminium XPM Jali of expended metal n exc 1Kg/Sqm ,cut to length bent to shape required and fixing with galvanised steel staples fixed to aluminium frame complete all as specified and directed.

Supply & fixing aluminium anodized barrel tower bolts 100mm long of extruded section complete all as specified and directed

Supply and fixing ISI mark aluminium handles 100mm long, cast type, anodised complete all as specified and directed

S&F Aluminium powder coated hook and eye 125 mm long complete all as specified and directed.

M&L for 15mm thick screed bed in CM 1:3 mixed with water proofing compound as per manufacturer instruction , laying over green concrete surfaces, finishing the surface even and smooth with out using extra cement , complete all as specified and directed. (WPC measured separately)

Supply only liquid water proofing compound complete all as specified and directed.

M/L for roof treatment with polymeric water proofing membrane with certain specification given below as under complete all as specified & directed) (a) Cleaning and brooming the surface of roof. (b) Providing average 15mm thick plaster bed in CM(1:3) mixed with water proofing compoundI( will be paid under item no-29 & 30). (c) After the concrete is fully dried. It shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.40 liters/Sqm. (d) After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm (e) Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as of manufacture’s technical representation. prepared surfaces and fusing the joints with blow torch application. (f) A coat of bitumen grade 85/25 shall be applied @ 0.30 Kg/Sqm. (g)applying a tack coat of hot blown bitumen grade 85/25 @ 0.3 Kg/Sqm. (h) Apply one coat of aluminium paint (0.2kg/sqm).

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.18Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed.

Dismantling chequred tiles including rubbish off the premises complete.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,laid over 15 mm thick screed bed in CM 1:6 in floor set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the color of tile complete all as specified and directed

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .

Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.

M/L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified & directed.

Material & labour for rendering 10mm thick in cm 1:4 as in ceiling/ chajja Facia finished even & fair faces complete all as specified and directed .

M & L for prepration of new plastered or unplastered surfaces of wall including preparation of surface properly and applying two coats of cement base paint complete all as specified and as directed.

M & L for prepration of new plastered or unplastered surfaces of wall and applying a layer of Birla / JK. wall care putty and applying two coats of oil bound distemper complete all as specified an directed.

Material & labour for preparing old/new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed .

Material & labour for preparation of new or old previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L for applying two coats of exterior emulsion paint white or tint on walls/ chajja/ facias/ fins on old surfaces including complete removal of existing treatment complete all as specified and directed

Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed .

Material & labour for reinforced cement concrete 1:2:4 type B1 used as in chajja, facia, shelves, manhole cover etc any height up to double storey bldgs etc complete all as specified and directed.

M &L for form work with scaffolding to chajjas,facia and similiar work including edges any height up to double storey bldgs fair finished comlplete all as specified and directed.

Supply & fix mild steel deformed bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC bend pipe etc complete all as specified and directed

Supply & fix in repair of vitreous china wash down water closet pan (pedestal pattern) white of size 690mm x 360mm x 390mm replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed of PVC low level flushing cistern 10 Ltr capacity white with inlet , ball valve, float and handle incl brackets incl 32 mm dia PVC flush pipe for low level cistern fixed as in repair all as specified

Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic ISI PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp including taking down carefully existing copper/aluminium point wiring such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.

All as per serial item No 53 here-in-before for one Fan/ exhaust fan point.

All as per serial item No 53 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 53 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 53 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.

Supply and fix socket outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

Supply and fix in replacement of LED mirror light fitting, 10 Watt, 2 feet long with IP 20 protection comprises of extruded aluminium housing, polycarbonate diffuser, integrated electronic driver with industrial grade heavy duty driver having THD < 10% all accessories pre-wired including connecting up complete all as directed.

Supply and fix in replacement of LED security light fitting 20 watt, 3500 lumen, 5700K with IP 65 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, ISI mark medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

All as per serial item No 71 here-in-before but with 2.5 Sq mm nominal cross sectional area wire.

Taking down carefully ceiling fan/ exhaust fan of any sweep complete with all accessories, dismantling blades and kept in safe custody including painting complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging and connecting up with provn of 3 core copper flexible cable of size 1.5 Sq mm from ceiling rose to fan complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

supply and fixing air ventilating fan 250 mm sweep PVC body, AC, single phase, 230 volts, 1200 RPM complete with in-built louvers shutters and including PVC insulated 2 core 1.5 sqmm copper cable from ceiling rose to fan complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S & F Wall / surface mounted type Bulk Head LED light fitting complete with LED lamp 10 watt , extruded aluminium heat sink provide for efficient heat dissipation and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

M/s Wadaihra Construction

PANKAJ AND BROTHERS