ET-06/EMD-II/BTPS/PTPP/2021-22

Amount

Routine up keeping of HT/LT power cables (Except Cable gallery at Zero mtr and Ten mtr)and maintaining exhaust fans and other miscellaneous work in 2X210 MW of BTPS.(One job consist of one month period).

Routine cleaning of cable galleries floors (Size : 132Mx8.6M, cleaning of cable galleries roofs, all four side of walls of ) at zero meter & ten meter elevation elevation,cleaning of cables in cable galleries and out side area of DG sets building in 2X210 MW of BTPS.(One job consist of one week period).

Salvaging/laying of HTUE &XLPE cable per meter 1CX800 & 3CX185

Salvaging/laying of LT cable per meter 1CX800 ,3CX240 &3CX300 &1CX630 ,3CX150 & 3CX185

Salvaging/laying of LT cable per meter 1CX400 ,3CX120 &1CX300 &1CX240 ,2CX120 ,3CX95,3CX75 & 1CX185

Salvaging/laying of LT cable per meter 1CX150 ,1CX120 &3CX50

Salvaging/laying of LT cable between 35 sq mm to 50 sq mm size

salvaging/laying of LT cable below 35 sq.mmper meter

Straight through jointing of HTUE & XLPE cable per set of 1CX800 & 3CX185

Straight through jointing of LT cable per set of 1CX800, 3CX240 ,3CX300,1CX630 ,3CX150 ,3CX185

Straight through jointing of LT cable per set of &1CX400 ,3CX120 ,1CX300,1CX240 ,2CX120 ,3CX95,3CX75 ,1CX185

Straight through jointing of LT cable per set &1CX150 ,1CX120 &3CX50

Straight through jointing of LT cable size between 35 sq. mm & 50 sq.mm per meter

straight through jointing of LT cable below 35 sq.mm per meter

Relugging of HTUE &XLPE cable per set of 1CX800 , 3CX185

relugging of LT cable per set of 1CX800 ,3CX240 &3CX300

relugging of LT cable per set of 1CX630 ,3CX150 &3CX185

Relugging of LT cable per set 1CX400 ,3CX120 &1CX300,1CX240 ,2CX120 ,3CX95,3CX75, 1CX185

Relugging of LT cable per set of 1CX150 ,1CX120 ,3Cx35,3CX50

Relugging of LT cable per set from 35 sq mm to 50 sq mm per mtr

Relugging of LT cable per set below 35 sq mm per mtr

End termination of HTUE &XLPE cable per set of 1CX800 & 3CX185

End termination of LT cable per set of 1CX800 ,3CX240 &3CX300

End termination of LT cable per set of 1CX630 ,3CX150 &3CX185

End termination of LT cable per set of 1CX400 ,3CX120 &1CX300

End termination of LT cable per set 1CX240 ,2CX120 ,3CX95,3CX75 & 1CX185

End termination of LT cable per set of 1CX150 ,1CX120 &3CX50

End termination of LT cable size between 35 sq. mm & 50 sq.mm per meter

End termination of LT cable below 35 sq.mm per meter

Erection of various type of TPN switch/starter/welding receptacle upto 63 A rating.

Erection of various types of TPN switch / starter above 63 A rating.

Digging of earth for location & attending faulty portion of cable and refilling in same manner after attending the fault per cubic meter.

Providing cable markers as danger board at every 10 meter to Avoid damage to underground cable by grouting 2 Ft. long angle Pieces wherever required.

Removal & refixing of chequer plate or grid or fire proof board for attending cable fault on beneath the racks or for maintenance purpose.

Writing of nomenclature in size of 1-1/2 inch as and when required anywhere on panel board as per scope of work.

Laying/Removal of Control cables of all types from Trench/Tunnel & cartage/storage at site store by proper re-rolling.

Providing new tray cover at different locations and clamping thereof as per size.

Painting of trays/plates or other MS structure with red oxide primer with material per sq meter.

Painting of trays/plates or other MS structure with synthetic enameled of reputed brand with material per sq meter.

Re-winding of ceiling Fan /Pedestal Fan/Cabin Fan/Single phase exhaust fan /Wall Fan

Rewinding of exhaust fan up to 01 KW

Rewinding of exhaust fan above 01 KW to 03 KW

Rewinding of exhaust fan above 03 KW

Overhauling of Exhaust Fan up to 3 KW (Three phase)

Overhauling of Exhaust Fan above 3.0 KW to 5.0 KW (Three phase)

Overhauling of Ceiling Fan /Cabin Fan

Supply & replacement of bearing of ceiling fan as per scope of work.

Supply and replacement of rotor shaft of ceiling Fan Motors as per scope of work.

Supply and replacement of condenser of ceiling fan. (2.5 MF)

Supply and replacement of ceiling fan regulator

Installation/Shifting of Ceiling fan /Tubelight

Supply & replacement of bearings in exhaust fan

Supply and replacement of rotor shaft of Exhaust Fan Motors.

Supply and replacement of condenser of Exhaust Fan.

Supply & fixing of over load relay ¾ legs /3 Phase contactor of starter of exhaust fan(from 2.0 to 7.5 amp)

Supply and fixing of 8 way consumer unit with 63 amp Isolator .(Havells,Anchor,Philips,Legrand,Bajaj,SSK).

Supply & fixing of box type plastic board with plastic top suitable for 01 switch and 01 socket (without switch and socket)

Supply & fixing of Box type plastic board with plastic top suitable for more than 01 switch and 01 socket (without switch and socket)

Supply & fixing/replacement of damaged 16-32 amp MCB(Havells,Anchor,Philips,Legrand ,Bajaj,SSK )

Day to day maintenance of single core double wire/single wire dressing of loose/dismantle/damage wiring by providing gully, clamps & clips etc.

Supply & replacement of 5/6 Amp, 250 V AC, switch /socket ( Havells,Anchor,Philips ,Bajaj,SSK )

Supply & replacement of 15/16 Amp,250 V AC switch /socket. (Havells,Anchor,Philips,SSK ,Bajaj )

Complete electrical wiring for making 5 amp point along with material like switch,socket,boards ,wires ,casing capingetc

Complete electrical wiring for making 15 amp point along with material like switch,socket,boards ,wires ,casing capingetc

Supply & replacement of SP&N enclosure, any std. ISI make with 2 pole and earth metal plug & socket for incorporating SP/DP MCB of 16/20 A. (Havells,Anchor,Philips,Legrand ,Bajaj,SSK )

Supply & fixing of MCB distribution board SPN (4 way /6way and without MCB) single door in place of worn out damaged MCB Box. (Havells,Anchor,Philips,Legrand ,Bajaj,SSK )

Supply and fixing of 8'X6" SS ENCLOSURE for fixing of T.B. and emergency push button at motors

M/S SHYAM ERECTORS

M/S R.P. CONSTRUCTION CO.