GE/W/LKO/06 OF 2021-22 SPL REPAIR TO ROOF TREATMENT TO BLDG NO 17, 18, 19 RAK MARG, 9 THIMMAYA MARG, 6/2 RAK SF, 4 THIIMMAYA MARG AND ADDN/ALT TO SALUTING DESK AT BLDG NO 171 OF 11 GRRC UNDER GE WEST LUCKNOW

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) such as beams, roof, shelves, manhole cover, chajjas and similar suspended work (reinforcement cut to facilitate demolition) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed. (Note:- cutting hole in wall is deemed to be included in the rate quoted)

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed. (Note:- cutting hole in wall is deemed to be included in the rate quoted)

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each and refixing in same opening after easening complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking down eaves gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc. including cleaning for refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for morrum/ approved earth filling in floors or pavings laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 20cm in girth complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 10mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 10mm thick in CM 1:3 on ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M & L for preparation of surface of concrete/plastered surface and applying a coat of acrylic polymer based water proofing compound as per manufacturer's instructions on new plastered surface of wall/ chajja etc. complete all as specified and directed

M & L for preparation of surface of wall/chajja and applying a coat of Tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P151, two part of cement by weight and shall be allowed to dry for 4 to 6 hours. Applying a coat of tapecrete brush topping 1.5mm thick consisting of one part of Tapecrete P-151, two parts of cement and two parts of silica sand by weight and cured for minimum two days complete all as specified and directed

M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base etc. complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base for water tank complete all as specified and directed.

M&L plain Cement Concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling in pressed steel frames complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels, finished surface even and smooth without using extra cement and forming 12mm wide expansion joints to the full depth, and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc.complete all as specified and directed.

M&L plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in padding or levelling course for filling undulations or depressions on roof complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 60x63mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 19 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 75x50mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 28 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 100x63mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 125x63mm double rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares, with plain, chamfered or rounded, metred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24(a) and fitted to chowkats complete all as specified and directed.

S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F anodized aluminium powder coated (thickness of powder coating not less than 50 micron) glazed and gauzed window shutters, sliding type, three track (two of glass and one of stainless steel wire cloth) without sash bars, with aluminium sections weighing not less than 0.55kg/m and three track aluminium sections of size 100x38x1.50mm of including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, fibre wheel rollers, anodized aluminium fittings such as hinges, tower bolts and handles etc. including glazed with 5mm thick tinted glass and wire meshed with stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for foxong etc. complete as specified and fixed including one shop coat of primer complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodized aluminium window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 02 nos 100mm long aluminium hinges B-21 type, 01 no 100mm long aluminium tower bolt, 01 no aluminium handle, 01 No peg stay 150mm long in each shutter complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodized aluminium window and ventilator shutters, fixed type, using 1.50mm thick aluminium section having frame of size 65x38x1.25mm, including 4mm thick pin headed/tinted glass fixed with screws, with necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, complete all as specified and directed.

S & F pressed steel door frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F pressed steel door frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size stainless steel butt hinges, medium weight and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long Aluminium anodised, hasp and staple, with mild steel pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 300mm long, mild steel, ordinary rat tail rod pattern springs including including roller and roller plate complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod, superior quality, with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S & F 18/19mm thick 1st quality plywood interior grade both side with commercial face, grade BWR, type BB fixed with screw/ nails to timber frame work edge chamfered complete all as specified and directed.

M&L 0.90mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F Ball catches (magnet catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50x15mm and fixed to shutter complete all as specified and directed.

S&F cloth hanger rod 18-20mm dia steel chromium plated for hanging clothes in wardrobe including suitable brakets complete all as specified and directed.

S & F 300mm long stainless steel six peg hanger chromium plated as approved by Eng-in-charge complete all as specified and directed.

M&L for 5.5mm thick sheet glass, ordinary type and glazing with oil putty or wooden beads/aluminium beading in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for light shade (1st quality) vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for light shade (1st quality) vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering of mortar 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles not exceeding 0.06 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 350x250x7mm/ 450x300x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in shelves, cooking platform etc., bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in partition to cupboards including rubbing, grinding and including making round moulding to exposed edges complete all as specified and directed.

S&F Exterior finish floor tiles of appproved size 10 to 12mm thick, superior quality, approved shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Make: Endura/ Duracrete/ Naveen/ Eurocon/ NITCO.

M&L 20-25 mm thick Kota stone slab, machine cut and polished as in flooring, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding and mirror polishing complete all as specified and directed.

M & L for cutting, grinding old kota stone flooring, skirting, dados etc with caborandom stone by hand or by machine making the surface clean to remove dust and rubbing & polishing with bee wax polish complete all as specified and directed.

M&L 20 mm thick granite stone slab, machine cut and polished as in steps, jambs, pillars, window cills etc., bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding complete all as specified and directed. (Note :- Rounding to edges shall be measured and paid separetely)

M&L 20 mm thick granite stone slab, machine cut and polished as in wall lining bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 10mm thick rendering in cement mortar 1:4, including rubbing, grinding complete all as specified and directed. (Note :- Rounding to edges shall be measured and paid separetely)

M & L for rounding to edges of stone slab one edge, such as steps and other similar situations complete all as specified and directed.

S & F stainless steel round balusters of 50mm dia and 60cm height including fixing in PCC bed block in cement concrete 1:2:4 type B-1 (usingh 20mm graded stone aggregates) of size 200x200x300mm and including hanging hooks for fixing of chain etc complete all as specified and directed.

S & F stainless steel chain for fixing and hanging around balusters complete all as specified and directed

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint on old previously treated surfaces of wall including preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment of wall and M&L for two coats of cement based paint on previously treated plastered surfaces of wall over one coat of primer and a coat of putty including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on previously treated/untreated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of white wash on old surface of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm bore single lever basin mixture central hole for WHB system without popup waste system with 450 mm long braided hoses complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35011BPM/ Plumber (ZEUS) Cat part No. ZE-3104/Hindware (CORA) Cat part No. F440009

S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 750x600x250mm, made out of 0.63mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35117PM/ Plumber (ZEUS) Cat part No. ZE-3101LB, (ORNAMIX PRIME) Cat part No. ORP-10117PM

S&F in repairs stop cock/angle valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F 15mm bore PVC connections, superior quality, with CP brass nuts of length 450mm complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and plastic water closet seat cover, white, complete all as specified and directed. Make :- Jaquar(LYRIC) Cat part No. LYS-WHT-38851S(S-300)/ Parryware (Qube plus) Cat part No. C849F(S-305)/ Plumber (Prive) Cat Part No. PBW-OWC-3008 (S-300)/ Hindware (SPLENDER) Starwhite Cat part No. 92519 S-30

S&F in repair stainless steel sink made out of 1mm thick sheet with plugs, washers incl brackets fixed to wall and connecting union to pipe overall size 495mm x 420mm, bowl size 410x330x160mm including PVC waste pipe and waste coupling 40 mm dia complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet with plugs, washers incl brackets fixed to wall and connecting union to pipe overall size 1145mm x 510mm, bowl size 560x410x200mm including PVC waste pipe and waste coupling 40 mm dia complete all as specified and directed.

S&F in repair 15 mm bore single lever sink mixture central hole for WHB system without popup waste system with 450 mm long braided hoses complete all as specified and directed. Make :- Jaquar/ Plumber /Hindware

S&F in repair overhead shower rose with arms 450 mm long, 200mm x 200 mm size, square shape, single flow, ABS body chrome plated with grey face plate with rubit cleaning system, suitable for 15mm bore pipe and fixed complete all as specified and directed. Make :- Jaquar(Shower) Cat part No. OHS-35497, Jaquar (Shower Arm) Cat part No. SHA-455L400/ Hindware(Shower) Cat part No. F160103, Hindware(Shower Arm) Cat part No. 160099/ Plumber(Shower) Cat part No. RS-8008, Plumber (Shower Arm) Cat part No. ARMS008

S&F in repair vitreous china under counter type Wash basin, white, oval shape of size 555x425mmx195mm including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed. Make :- Jaquar(Florentine) Cat part No. FLS-WHT-5701/ Parryware (CASCADE NXT) Cat part No. C0407/Plumber(Arena) Cat part No. PBW-UCB-061B

S&F in repairs vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F pillar taps 15mm bore, half/quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs concealed stop valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 100mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed to walls with ms clamps complete all as specified and directed.

S&F in repairs cast iron bends of any radius diminishing pieces or tapers, suitable for 100mm bore CI pipes, fixed and jointed with cement mortar complete all as specified and directed.

S&F in repairs cast iron bends of any radius diminishing pieces or tapers, suitable for 75mm bore CI pipes, fixed and jointed with cement mortar complete all as specified and directed.

S&F in repairs cast iron nahani trap, with gratings including jointing to waste pipe fixed in cement concrete type B1 1:2:4 for 100mm bore of outlet complete all as specified and directed.

S&F in repairs cast iron floor trap, with gratings including jointing to waste pipe fixed in cement concrete type B1 1:2:4 for 75mm bore of outlet complete all as specified and directed.

S&F in repairs 100mm bore cast iron, branch pieces, single, equal or unequal, ordinary or inverted (spigot or socketed type) or with parellel branches jointed with cement mortar complete all as specified and directed.

S&F in repairs CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F in repairs CP brass toilet paper holder, fancy type, with wall hook, bracket complete set as per sample approved complete all as specified and directed.

S&F in repairs CP brass soap dish , fancy type, as per sample approved complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower rose with arms, 125mm size, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.

S&F in repair fancy type brass chromium plated towel rack 600 mm long with lower hangers complete all as specified and directed. Make :- Jaquar Cat part No. AQN 7781/ Plumber Cat part No. U-9090/ Hindware Cat part No. F890012

S&F in repair PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag

S&F in repairs 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F in repairs 10mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

M&L provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing roof treatment of any description and removal of waste material from site including cleaning of surface. (b) M & L for rendering 10mm thick in cement mortar 1:3 using 100% coarse sand on roof surface incl WPC as per manufacturers instructions. (c) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

M&L provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing roof treatment of any description and removal of waste material from site including cleaning of surface. (b) Preparing surface of roof and applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed. Note :- PCC padding or levelling course shall be measured and paid seperately.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp modular switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed GI terminal switch boxes not less than 1.6mm thick of reqd size factory made complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 149 above but for one bell point controlled by one bell push.

All as per item no 149 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 149 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 149 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Fan step regulator, 120W - 2 module (Modular) complete all as specified and directed.

S & F white cover plate with frame modular type of 03 module complete all as specified and directed.

S & F white cover plate with frame modular type of 04 module complete all as specified and directed.

S & F white cover plate with frame modular type of 06 module complete all as specified and directed.

S & F white cover plate with frame modular type of 08 module complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 164 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 164 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 164 above but for one bell point controlled by one bell push.

All as per item no 164 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F bell push switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F call bell (Ding dong) AC 230 Volt complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 22 W, 6000 K,110 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02

S&F RUBY (CLEAR) IP-65 integral post top lantern 1x25 Watt LED decorative new generation, post top, energy saving, environmental friendly, long life aesthetically design with symmetric light distribution, spun aluminium landscape luminaire with high power LEDs as light source suitable with fixing the fitting with 50 mm dia GI pipe 'medium grade' 0.5 mtr length including civil work and connection complete all as directed by Engineer -in-charge. Make : Havells or equivalent in CG/Bajaj.

S&F RUBY (CLEAR) IP-65 integral post top lantern 1x15 Watt LED decorative new generation, post top, energy saving, environmental friendly, long life aesthetically design with symmetric light distribution, spun aluminium landscape luminaire with high power LEDs as light source suitable connection complete all as directed by Engineer -in-charge. Make : Havells or equivalent in CG/Bajaj.

Supply and fixing modular type AC startor with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. Make: Havells crabtree/Anchor Panasonic

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way, 415Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB single door type, single pole and neutral 2 way, 240Volts without bus bar, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, triple pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 2.5sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6sqmm nominal cross sectional area and one run of 6sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 4 Sq mm 2 core stranded condector nominal cross section all as directed by Engr - in - Charge.

Taking down existing electric meter of any type and capacity and fixing back to location as directed including making all electric connections complete all as specifed and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh funnel alternate layer of char coal and salt, PCC chamber and including RCC cover including all necessary excavation & earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 print and as directed .

S&F in repair wall mounted 18/20 W LED integrated tube light fitting of size 1200mm long batten with aluminium housing and decorative end cap and one no 18/20 W LED 6000 K, 230V, with integrated electronic driver complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with 3 core flexible copper wire complete all as specified and directed. Make: Havells Lumiline Plus cat no. LUMILINEPLUSBS20WLED865SPCSS or C&S Nakshatra series cat no. LTTB4F20WLED/W/ Philips Smartbrite batten Cat part No. 021LED22S6500/400 PSU GR/SI.

S&F in replacement wall/surface mounting luminaries (Mirror Light) integrated LED Batten (2 feet) 9/10 W, 6000 K, 230V with extruded aluminium housing & integrated electronic driver complete including necessary electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as per specified and directed. Make: HAVELLS cat Part No. Lumiline plus BS 10WLED865SPCSS/ C&S Nakshatra series cat Part No.LTTB2F10WLED/W / Philips Smartbrite batten Cat part No. 021LED22S6500/4000 PSU GR/SI.

S&F in repair wall light with Decorative wall light fixture made up of Polycarbonate, (Spiral B-22 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connections arrangements complete all as specified and as directed. Make Havells code : CITY 1 LHDL02160099 or equivalent in Bajaj/Philips(Grace) Cat part No. 919215850005 (Note: Rates incl 01X 9 W LED Bulb with each fitting)

S&F in repairs ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

Taking down existing ceiling fan, exhaust fan or geyser of any type and capacity and fixing back to location as directed including making all electric connections complete all as specifed and directed.

M/S Reliance Construction

m/s raghubar dayal

rajan construction

R K CONTRACTOR AND SUPPLIERS

HS ASSOCIATES