SPECIAL REPAIR OF RESEARSH LABORATORY BUILDING AT PWD B AND R OFFICE CAMPUS AT HISAR (PDG. SR TO E.I ONLY)

Amount

Main Switches (HSR 31.12 (a): Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. v) Double pole switch 32 amp. 415 Volts, Cat-B

xiv) Triple pole switch with neutral link 32 amp. 415 Volts. Cat-B.

xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15) ii) S.P.N. enclosure for single pole MCB 20 amp.

Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

iii) SPN MCB of 6 amp. To 32 amp.

x) TPN MCB of 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18) xi) Bakelite angle / straight button holder large size.

vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

ix (b) Bell push flush type ( without flexible wire ) in existing sheet.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxv) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick Bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

Erection and carriage of fans (HSR 31.20): i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

iv) Erection of cabin fan complete with necessary earthing including carriage from local railway station /goods transport /PWD store to the site of work.

vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). xvi) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface

xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

(Q) Earthing (HSR 31.22). i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

Under Ground Cables : Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (HSR 31.25). xxxix) 10 Sq. mm 4 Core Ard Cable.

xl) 16 Sq. mm 4 Core Ard Cable .

xli) 25 Sq. mm 4 Core Ard Cable .

xliii) 50 Sq. mm 4 Core Ard Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxxx) 10 Sq. mm 4 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable.

xli) 25 Sq. mm 4 Core Ard. Cable .

xliii) 50 Sq. mm 4 Core Ard. Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36) i) Fan Point: b) Medium Point

c) Long Point

ii) Light Point: a) Short Point

b) Medium Point

c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc: a) Short Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

Wiring in existing Conduit pipe (Recessed) for Electrical points.Wiring only in 1.5sqmm PVC insulated copper conductor cable in existing conduit pipe and MS box covered with 5 mm thick bakelite sheet including cost of switch, wall shocket, celling rose etc. (HSR 31.38) I) Fan Point a) Short Point

b) Medium Point

c) Long Point

II) Light Point: a) Short Point

b) Medium Point

c) Long point

III) Twin control light point with 2 way, 5 amp. Single pole switch: a) Short Point

c) Long point

VI) Call bell point: c) Long point

VII) 3-pin 5 amp. Plug point including earthing the 3rd pin etc: a) Short Point

c) Long point

VIII) 3-pin15 amp.Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) v) 4-way,TP&N (Horizontal)(8+12)

vi) 8-way,TP&N (Horizontal)(8+24)

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55).

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. (HSR 31.56). i) 10 amp. 1 way switch

ii) 10 amp. 2 way switch

iii) 20 amp. switch

iv) 10 amp. Socket

v) 16 amp. Socket

vi) Bell Push

vii) Fan Regulator

viii) Call bell Ding-Dong (Monica)

ix) Blanking plate.

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. (HSR 31.57). i) 1 & 2 Modules

ii) 3 Modules

iii) 4 Modules

iv) 6 Modules

v) 8 Modules

vi) 12 Modules

Non Schedule items: S/E of M.S. box for computer made of 16 guage of size 250mm x 200mm x 100 mm deep covered with 5 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work.

Non Schedule items: Supply only of Ceiling Fans of 48" Sweep of approved make with double ball baring without regulator complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work.(Make:- Orient/ Usha/ Crompton.)

Non Schedule items: Supply only of Exhauxt Fans of 12" with double ball baring complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work. (Make:- Orient/ Usha/ Crompton.)

Non Schedule items: Supply only of Wall fans of size 16"(400 mm) of Orient make & Model Wall-45 High velocity/ equilant make of Havell's/ Crompton make complete in all respect.(Including all Taxes).

S/E of indoor commercial recessed mounted LED panel 2'X2' of 42 W of Havell's make & Model Venus Neo HE of 42 W LED 5700K < 100 Lumens /Equilant model of Crompton/ Philips/ Wipro/ HPL with Fixture size 595x595mm, Invative direct/ indirect luminaire suitable for armstrong/ Grid ceiling with high brightness LEDs and conical de-glaring center panel for effecient downlight completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Dismental of old Ceiling fan 48"

INFERNO POWER AND SAFETY