REPAIR AND MAINTENANCE OF STEEL WOODEN AND TRADE PATTERN FURNITURES OF OTM AND MD ACCN AT BHUBANESWAR AND GOPALPUR AREAS

Amount

SCH 'A' PART-I (BHUBANESWAR AREA) Repairs to Table Office clerk steel (FD-1004) by S&F in replacement of following components as shown in drawing complete all as specified and directed:-

18 mm thick prelaminated HDHMR bound board of size (1200 X 600) mm top including all round PVC liping (18 X 2 mm thick) complete all as specified and directed by Engr-in-Charge:-.

Single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer and spray painting as per drawing, Complete all as specified and directed.

Square PVC End Cap push type Leg Pipe shoes for 25 Sq mm MS legs, complete all as specified and directed by Engr-in-Charge.

SS lock 6 lever with key (Make Harrison / Godrej / Link)

Repairs to Table Office Officer Steel (FD-1002 ) by S&F in replacement of following components as shown in drawing complete all as specified and directed :-

18 mm thick prelaminated HDHMR bound board of size (1800X1200) mm top including all round PVC liping (18 X 2 mm thick) ,Complete all as specified and directed by Engr-in-Charge:-

Single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer as per drawing complete all as specified and directed.

Square PVC End Cap push type Leg Pipe shoes to 25 Sq mm MS legs, complete all as specified and directed.

Repairs to " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17) by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engineer-in-Charge :-

18 mm thick prelaminated particle board Exterior Grade withTeak wood finish of size (450 X 750) mm top including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed.

18 Sq mm MS tube having wall thickness of 1.6 mm as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer to the furniture, complete all as specified and directed by Engr-in-Charge.

Square PVC End Cap push type Leg Pipe shoes for 18 SqMM MS legs, complete all as specified and directed.

Repairs to "Almirah Steel Large with shelves (Drg No FD-1031" by S & F in replacement of following components as shown on drawing complete all as specified and directed Eng-in-Charge :-

Legs of Size (100 X 450 X 75mm) made of 2 mm thick MS Sheet apply of a coat of red oxide primer and one coat of spray painting as per existing shade or as directed.

Two way locking system with MS rod (with out Lock) .

Repairs to " Almirah Steel Small with shelves (Drg No FD-1032) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Legs of Size (100 X 440 X 75mm) made of 2 mm thick MS Sheet apply of one coat of red oxide primer as per drawing.

Two way locking system with MS rod (with out Lock)

150 mm long chromium plated mild steel handles (Almirah large/Small steel)

Repairs to " Chair Varandha Steel (Drg No : FD/MAP-II/06) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Removing US PVC Back & seat (As per drawing ) with 4MM TH. (RIBS ON BACK SIDE) (weight not less than 1.5 Kgs Each), M&L for refixing the new seat as per drawing as specified and directed.

20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces

Supply and fixing (welding as per standard workmanship) of 02 nos of 5 mm thick 16 mm wide MS flat bar of 455 mm long (+- 5 mm) to side rails of seat at equal distance including a coat of red oxide primer and one coat of brush paint on steel surfaces and joints complete all as specified and directed.

Square PVC End Cap push type Leg Pipe shoes to 19 mm dia MS legs, complete all as specified and directed.

Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

12 mm BWR ply of size (850 X 1974)mm as per drawing, complete all as specified and directed.

38 Sq mm PVC Shoes.

Repairs to " Charpoy with hard top (FD: ED/MAP-II/01) " by S&F in replacement of following components as shown on drg complete all as specified and directed.

12 mm BWR ply of size (838 X 1916)mm as per drawing, complete all as specified and directed.

32 Sq mm PVC Shoes.

S & Fix 80 mm long GI nuts and 02 nos of bolts for Charpy with hard top (FD: ED/MAP-II/01) & Bed hard Steel (FD: E6/MAP/08/(R) in replacement of US nuts and bolts, complete all as specified and directed.

Repairs to " Chair writing steel (FD: ED/E6/MAP/12) " or Godrej Trade pattern Furniture by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Seat of chair writing as per existing shape and size (450mm wide) as per drawing.

Back rest of chair writing as per existing shape and size (500 mm long x450mm wide at bottom and 350 mm at top) as shown in drawing.

MS frame of Chair writing cantilever type powder coated tubular frame made out of 25 mm X 10 mm section with PVC shoes.

One piece hand rest made out of black integral shin made out of polyurethane with 75-85 shore "A" hardness and reinforced with MS insert, weather and scrach resistant, with minimum 230 mm high hand rest as per drawing with necessary nuts and bolts.

PVC stopper for 25 X 10 mm cantilever type MS tube with necessary fitings.

Repairs to "Chair Computer (FD: ED/E6/MAP/12)" and revolving chairs (TP) (Equivalent to Chair Computer ) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

One piece hand rest made out of black integral shin made out of polyurethane with 75-85 shore "A" hardness and reinforced with MS insert with minimum 230 mm high hand rest as per drawing with necessary nuts and bolts.

Pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5 mm dia forged bright zinc plated 600 mm pitch-center dia with press fitted 05 nos of castors (ISI Marked) as per drawing.

Seat of size 510 X 470 X 60 mm along with MS holder for lift operation and fixing of seat with hydraulic system as described in drawing, complete all as specified and directed.

Back rest with contour lumber support and hight adjustment handel as described in drawing, complete all as specified and directed.

Hydraulic system (ISI Marked) as per drawing

Repairs to " Table bed side (Drg No FD/E6/MAP/15 (R) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Back ply and fixing new 12 mm BWR back ply of size (400 X 420) mm with necessary ms nails

Plywood of drawer then supply and fix new 06 mm BWR ply of drawers ( Size 415 mm X 410 mm)

Square PVC End Cap push type Leg Pipe shoes to 18 Sq MM MS legs

Repairs to " Table Steel 900 X 600 (Drg No FD-1007, FD-1008) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 600 X 900 mm) of 18 mm thick pre laminated particle board exterior grade of teak wood face with 4mm thick well polished teak wood beading all around

24 Sqmm pipe having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing to serviceable parts and including a coat of red oxide primer on replaced steel surfaces complete all as specified and directed by Engr-in-Charge.

Repairs to " Table Centre Drawing No FD- 274" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board exterior grade of teak wood decorative face including 4 mm thick teakwood beading all round.

1st class seasoned teak wood leg of size 30 X 60 X 380 mm.

All as per Sl No 14.02 but long rail of size 20 X 50 X 850 mm

All as per Sl No 14.02 but short rail of size 20 X 50 X 420 mm

All as per Sl No 14.02 but stifner of size 20 X 50 X 420 mm

Repairs to "Chair Dining Officers (Drg No : FD/MAP-II/04)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Seat cushion 75 mm thick 40 Density cushion of size 450 X 450 mm along with leatherised rexine fabric (costing not less than Rs 350/- per meter) cover after fixing to 12 mm thick BWR plywood with staples as per drawing, Complete all as specified and directed.

1st class seasoned teak wood leg of size 30 X 50 X 950 mm as per drawing, Complete all as specified and directede.

All as per Sl No 15.02 but front leg of size 30 X 50 X 950 mm

All as per Sl No 15.02 but rail of size 65 X 25 X 450 mm

All as per Sl No 15.02 but back rest of size 25 X 45 X 450 mm

All as per Sl No 15.02 but ver srtip of size 30 X 15 X 600 mm

All as per Sl No 15.02 butstiffner of size 20 X 25 X 450 mm

Repairs to " Table dining 6 person (Drg No FD/ MAP-II/03)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 1500 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 22 X 45 mm thick wood beadings on short side and 18 X 4 mm thick well polished teak wood beading by screwing to short rail, all as per drawing complete all as specified and directed.

1st class seasoned teak wood leg of size 90 X 45 X 730 mm as per drawing, Complete all as specified and directede.

All as per Sl No 16.02 but long rail of size 90 X 45 X 850 mm

All as per Sl No 16.02 but short rail of size 90 X 45 X 1450 mm

All as per Sl No 16.02 but 2nd class teak wood stifner of size 90 X 45 X 850 mm

Repairs to " Table Peg (Drg No FD-384)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for removing of unserviceable top then supply and fix new top ( 450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed.

1st class seasoned teak wood leg of Size 30 X 50 X 380 mm.

All as per Sl No 17.02 but long rail of size 20X40X450 mm.

All as per Sl No 17.02 but short rail of size 20X40X380 mm.

Repairs to " Teapoy (Drg No FD-382) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 450 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed.

1st class seasoned teak wood leg of Size 30 X 60 X 530 mm, complete all as specified and directed.

All as per Sl No 18.02 but long rail of size 20X50X580 mm.

All as per Sl No 18.02 but short rail of size 20X50X380 mm.

Repairs to "Table writing (Drg No : FD-275)" by S&F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge:-

Top ( 1145 X 600 mm) of 18 mm thick pre laminated exterior gradeparticle board of teakwood face with 18 X 4 mm thick well polished teak wood beading all around.

Leg of 1st class seasoned teak wood of Size 35 X 55 X 730 mm as per drawing

All as per 19.02 but long rail / center stiffner of size 25 X 50 X 1100 mm

All as per 19.02 but short rail / side stiffner of size 25 X 50 X 550 mm

All as per 19.02 but rest for drawer of size 20 X 40 X 350 mm

18 mm thick 430 mm long MS piano hinges and 10 numbers of SS screws of15 mm long

300 mm / 12 inch side mount manual telescopic channel

Repairs to "Table Dressing including Stool (Drg No : FD/MAP-II/07) by S &F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :-

Mirror of 6 mm thick electro copper plated of polished sheet glass of size 1300 X 450 mm with well polished 20 X 25 mm teak wood beading all around.

Frame member of 1st class seasoned teak wood of size 35 X 45 X 1600 mm with necessary 08 numbers of SS screws

18 mm thick 380 mm long MS piano hinges and 06 numbers of SS screws of 15 mm long

300 mm / 12 inch side mount manual telescopic channel

Heavy Duty revolving nylon double wheels

Material & labour for removing of unserviceable seat cushion with cover then supply and fix new 75 mm thick 40 Density cushion of size 350 X 440 mm along with leatherised rexine fabric (costing not less than Rs 350/- per meter) cover (Three side chain type) as per drawing, Complete all as specified and directed by Eng-in-charge.

Repairs to "Table Computer (Drg No : FD/E6/MAP/03) by S & F in replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :-

30 mm wide side mount manual telescopic channel (300 to 400 mm long)

Repairs to "Book case open small (Drg No : FD-355) by S&F in replacement of following components as shown on drawing complete all as specified and directed :-

Well polished leg made out of 50 X 100 mm 1st class seasoned teak wood of 1230 mm long necessary 06 numbers of SS screws , complete all as specified and directed.

Repairs to "Side Board (Drg No : FD-1112) & replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :-

150 mm long fancy stainless steel handel with necessary screws.

30 mm wide side mount manual telescopic channel (350 to 400 mm long)

Repairs to Bin Linen Multipurpose (FD/E6/MAP/09) by replacement of following components as shown on drawing complete all as specified and directed by Engr-in-Charge :-

150 mm long fancy stainless steel handel with 04 number of SS screws

30 mm wide side mount manual telescopic channel of 300 to 350 mm long

Material & labour for removing of unserviceable caning of Chair Easy (Drg No FD-229) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed by Engr-in-Charge.

Supply , fixing & setting of 100 mm thick (40 density) foam cusion (Kurlon /Sleepwell/ Feather Foam) for seat of Sofa set four / five / single seater (FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed.

Supply , fixing & setting of cover of cushion of size 21" X 22" X 4" made of tapestry cloth (Costing not less than Rs 320 per meter) of approved quality and providing zip on 03 sides excluding one side for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed.

M&L for replacement of SS/brass lock 6 lever with key (Godrej Pattern). (For Almirah Small, Large and 1/2S /2H)

Material & labour for removing of unserviceable particle board part of the furniture like tables, sideboard, Bin multipurpose, book case, tv trolley, dressing mirror etc then supply and fix new part made of 18 mm thick pre laminated particle board of teakwood face exterior grade as per existing size as mentioned in drawing, complete all as specified and directed by Engr-in-Charge.

S&F for replacement of old unserviceable with new Stainless Steel Pegs of hat stand (Minimum 120 mm long) complete all as specified and directed.

Material & labour for fixing of 18 X 4 mm thick teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed.

Material & labour for replacement of "Nylon Buffers " of Wooden furniture (Chair Dining offr, Chair Easy, Teapoy, Table Centre, Table Peg, Table dining, Table card etc ) including screws complete all as specified and directed.

S&F in replacement of 75 mm fancy SS handels round body "C" type to be fixed from inner side with secres & washer to subjected furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed.

S&F in replacement of " 100 mm long stainless Steel handel" to be fixed with secrews to the furniture ( Side Board and Bin Solid etc) including screws complete all as specified and directed.

Material & labour for fixing of " 70 X 70 X 30 mm wooden corner after polishing with 02 Nos of screws" to various wooden furniture (Chair Dining, Chair Dining Officers, Chair Writing, Table Writing, Dining Table etc), complete all as specified and directed.

S&F in replacement of 12 mm thick BWR Plywood to furniture as per drawing complete all as specifice and directed.

M&L for removing old paint using mechanical grinder from following steel furniture and apply one coat of spray painting of synthetic enamel paint (Colour as decided by Eng-in-Charge) over and including a coat of red oxide primer as per drg complete all as specified and directed :-

Table Office clerk steel (FD-1004 )

Table Office Officer Steel (FD-1002 )

Almirah Steel Large with shelves (Drg No FD-1031)

Almirah Steel Small with shelves (Drg No FD-1032)

Locker Steel ( Drg No : CWE(P)V/SK/18)

Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)

Chair Varandha (Drg No : FD/MAP-II/06)

Rack Steel Closed 1830 X 380 X 910 mm

Book Case Steel FD-1028

Table with drawer 600 X 900 FD-1008

Chair CB Steel with Arms FD-386

Rack Shoe Steel FD/E6/MAP/02/R

Charpoy Steel (FD: ED/MAP-II/01

Bed Hard Steel (FD: E6/MAP/08®

Almirah Steel Large 1/2 S 1/2 H

Table Bed Side Steel FD/E6 MAP-15 ®

Table Computer FD/E6/MAP/03

M & L for French polishing to wooden furniture after removing the dirt and dust using mechanical grinder and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed by Engr-in-Charge

Table Centre Drawing No FD- 274

Chair Dining Officers (Drg No : FD/MAP-II/04)

Box Key FD-101 M

Table dining 6 person (Drg No FD/ MAP-II/03)

Table dining 8 person (Drg No FD/ MAP-II/03)

Table Peg (Drg No FD-384)

Teapoy (Drg No FD-382)

Table writing (Drg No : FD-275)

Chair Easy (Drg No FD-229)

Notice Board 2440 X 1220 mm FD-99 R

Sofa Five Seater FD- 281 & FD / MAP-II/02

Sofa Four Seater FD- 281 & FD / MAP-II/02

Sofa Single Seater FD- 281 & FD / MAP-II/02

Hat Stand with Mirror FD-361

M&L for fixing of steel part by 10 to 20 mm welding and then grinding to smoothen the surface and then applying enamel paint over a coat of redoxide primer complete all as specified and directed.

M&L for removing old US hinges 75-100 mm and fixing new hinges of 75-100 mm long with necessary welding / screws complete all as specified and directed.

SCH 'A' PART-II (GOPLAPUR AREA) Repairs to Table Office Officer Steel (FD-1002 ) by S&F in replacement of following components as shown in drawing complete all as specified and directed :-

18 mm thick prelaminated HDHMR bound board of size (1800X1200) mm top including all around PVC liping (18 X 2 mm thick)

Single drawer made of MS sheet of 20 gauge including apply of one coat of red oxide primer

PVC End Cap push type Leg Pipe shoes to 25 Sq mm MS legs

Removing of unserviceable lock then supply and fix new SS lock 6 lever with key (Make Harrison / Godrej / Link)

Repairs to " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

18 mm thick prelaminated particle board Exterior Grade withTeak wood finish of size (450 X 750) mm top including well polished 18X 4 mm thick teak wood beading all aroung the top of table

Removing of unserviceable shoes of teapoy varandah the supply and insert the Square PVC End Cap push type Leg Pipe shoes to 18 Sq MS legs, complete all as specified and directed by Engr-in-Charge.

Repairs to "Almirah Steel Large with shelves (Drg No FD-1031" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Leg of Size (100 X 450 X 75mm) made of 2 mm thick MS Sheet apply of a coat of red oxide primer and including one coat of spray painting.

S&F in replacement of two way locking system with MS rod (with out Lock) .

S&F in replacement of 150 mm long chromium plated mild steel handles complete all as specified as directed Eng-in-Charge.

Repairs to " Almirah Steel Small with shelves (Drg No FD-1032) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Legs of Size (100 X 440 X 75mm) made of 2 mm thick MS Sheet apply of one coat of red oxide primer as per drawing.

Two way locking system with MS rod (with out Lock)

150 mm long chromium plated mild steel handles complete all as specified as directed Engr-in-Charge.

Repairs to " Chair Varandha Steel (Drg No : FD/MAP-II/06) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Removing US PVC Back & seat (As per drawing ) with 4MM TH. (RIBS ON BACK SIDE) (weight not less than 1.5 Kgs Each), M&L for refixing the new seat as per drawing as specified and directed.

Removing of broken / damaged / decayed part of steel furniture made of 20 mm dia MS tube then supply and refix new 20 mm dia MS tube having wall thickness of 1.6 mm as applicable to the furniture as per drawing with necessary bending and welding including and including a coat of spray paint over a coat of red oxide primer on replaced steel surfaces complete all as specified and directed.

Supply and fixing (welding as per standard workmanship) of 01 number of 5 mm thick 16 mm wide MS flat bar of 455 mm long (+- 5 mm) to side rails of seat at equal distance including a coat of red oxide primer and one coat of brush paint on steel surfaces and joints complete all as specified and directed.

Pipe shoes to 19 mm dia MS legs, complete all as specified and directed.

Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

12 mm BWR ply of size (850 X 1974)mm as per drawing, complete all as specified and directed.

38 Sq mm PVC Shoes and supply and fix new 38 Sq mm PVC Shoes.

Repairs to " Charpoy with hard top (FD: ED/MAP-II/01) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

12 mm BWR ply of size (838 X 1916)mm as per drawing, complete all as specified and directed.

38 Sq MM PVC Shoes and supply and fix new 32 Sq mm PVC Shoes.

S & Fix 80 mm long GI nuts and 02 nos of bolts for Charpy with hard top (FD: ED/MAP-II/01) & Bed hard Steel (FD: E6/MAP/08/(R) in replacement of US nuts and bolts, complete all as specified and directed by Eng-in-Charg.

Repairs to " Chair writing steel (FD: ED/E6/MAP/12) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

One piece hand rest made out of black integral shin made out of polyurethane with 75-85 shore "A" hardness and reinforced with MS insert, weather and scrach resisrant, with minimum 230 mm high hand rest as per drawing with necessary nuts and bolts, complete all as specified and directed.

S&F PVC stopper for 25 X 10 mm cantilever type MS tube with necessary fitings, complete all as specified and directed.

Repairs to "Chair Computer (FD: ED/E6/MAP/12)" and revolving chairs (TP) (Equivalent to Chair Computer ) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

One piece hand rest made out of black integral shin made out of polyurethane with 75-85 shore "A" hardness and reinforced with MS insert with minimum 230 mm high hand rest as per drawing with necessary nuts and bolts, complete all as specified and directed.

Pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5 mm dia forged bright zinc plated 600 mm pitch-center dia with press fitted 05 nos of castors (ISI Marked) as per drawing, complete all as specified and directed.

Hydraulic system (ISI Marked) as per drawing, minimum 100 mm expansion complete all as specified and directed.

Repairs to " Table bed side (Drg No FD/E6/MAP/15 (R) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Material & labour for removing the unserviceable fancy handel with new SS handel of 75 mm long, complete all as specified and directed by Engr-in-Charge.

Material & labour for removing the unserviceable back ply and fixing new 06 mm BWR back ply of size (400 X 420) mm, complete all as specified and directed by Engr-in-Charge.

18 SqMM Square PVC End Cap push type Leg Pipe shoes to 18 Sq mm MS legs

Repairs to " Table Steel 900 X 600 (Drg No FD-1008) " by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 600 X 900 mm) of 18 mm thick pre laminated particle board exterior grade of teak wood face with 4mm thick well polished teak wood beading all roung , all as per drawing complete all as specified and directed.

24 mm Square PVC Shoes.

Repairs to " Table Centre Drawing No FD- 274" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board exterior grade of teak wood decorative face including 4 mm thick teakwood beading all round , all as per drawing complete all as specified and directed.

1st class seasoned teak wood leg of size 30 X 60 X 380 mm as per drawing, complete all as specified and directed.

All as per Sl No 53.02 but long rail of size 20 X 50 X 850 mm

All as per Sl No 53.02 but short rail of size 20 X 50 X 420 mm

All as per Sl No 53.02 but stifner of size 20 X 50 X 420 mm

Repairs to "Chair School with hand Board Drg No : FD/E6/MAP/05)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

18 mm thick prelaminated HDHMR bound board of size (300 X 5850) mm top including all round PVC liping (18 X 2 mm thick) ,complete all as specified and directed.

25 mm round PVC Shoes.

PVC Seat.

Material & labour for removing of unserviceable caning of Chair Easy (Drg No FD-229) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed.

Material & labour for removing of unserviceable caning of Chair Dining OR (Drg No FD-279) then weave with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane at Godrej pattern, complete all as specified and directed.

Repairs to "Chair Dining Officers (Drg No : FD/MAP-II/04)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

75 mm thick 40 Density cushion of size 450 X 450 mm along with leatherised rexine fabric (costing not less than Rs 350/- per meter) cover after fixing to 12 mm thick BWR plywood with staples as per drawing, complete all as specified and directed.

1st class seasoned teak wood stiffner of size 20 X 25 X 450 mm as per drawing, complete all as specified and directed.

S & F in replacement of old unserviceable top of Table Dining 4 seater (FD/E6/MAP-II/03) with new Top ( 1200 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 22 X 45 mm thick wood beadings on short side and 18 X 4 mm thick well polished teak wood beading by screwing to short rail, all as per drawing complete all as specified and directed.

S & F in replacement of old unserviceable top of Table Dining 4 seater (FD/E6/MAP-II/03) with new Top ( 1500 X 900 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 22 X 45 mm thick wood beadings on short side and 18 X 4 mm thick well polished teak wood beading by screwing to short rail, all as per drawing complete all as specified and directed.

Material & labour for removing of unserviceable top of Table Peg (FD-384) then supply and fix new top ( 450 X 300 mm) of 18 mm thick pre laminated particle board of teakwood face OSD exterior grade with 4mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed.

Material & labour for removing of unserviceable top of Teapoy (FD-382) then supply and fix new top ( 450 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all round , all as per drawing complete all as specified and directed.

Repairs to "Table writing (Drg No : FD-275)" by S&F in replacement of following components as shown on drg complete all as specified and directed :-

Top ( 1145 X 600 mm) of 18 mm thick pre laminated particle board of teakwood face exterior grade with 18 X 4 mm thick well polished teak wood beading all around.

1st class seasoned teak wood long rail / center stiffner of size 25 X 50 X 1100 mm as per drawing

All as per 62.02 but short rail / side stiffner of size 25 X 50 X 550 mm

All as per 62.04 but 18 mm thick 430 mm long MS piano hinges and 10 numbers of SS screws of15 mm long

All as per 62.04 but 75 mm long fancy stainless steel handel with 02 numbers of SS screws

Repairs to "Mirror Dressing Gents (Drg No : FD/E6/MAP/18) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

5 mm thick electro copper plated mirror of polished sheet glass of size 1200 X 600 mm with well polished 30 X 15 mm teak wood beading all round, all as per drawing complete all as specified and directed.

Repairs to "Table Dressing including Stool (Drg No : FD/MAP-II/07) by S&F in replacement of following components as shown on drg complete all as specified and directed :-

6 mm thick electro copper plated mirror of polished sheet glass of size 1300 X 450 mm with well polished 20 X 25 mm teak wood beading all round, all as per drawing.

Frame member of 1st class seasoned teak wood of size 35 X 45 X 1600 mm with necessary 08 numbers of SS screws , complete all as specified and directed.

18 mm thick 380 mm long MS piano hinges and 06 numbers of SS screws of 15 mm long

75 mm long fancy stainless steel handel with 02 number of SS screws

Heavy Duty revolving nylon double wheels

Material & labour for removing of unserviceable seat cushion with cover then supply and fix new 75 mm thick 40 Density cushion of size 350 X 440 mm along with leatherised rexine fabric (costing not less than Rs 350/- per meter) cover (Three side chain type) as per drawing, complete all as specified and directed.

Repairs to "Table Computer (Drg No : FD/E6/MAP/03) by S&F in replacement of following components as shown on drawing complete all as specified and directed :-

75 mm long fancy stainless steel handel with 02 number of SS screws

Repairs to Bin Linen Multipurpose (FD/E6/MAP/09) & "Side Board (Drg No : FD-1112) by S&F in replacement of following components as shown on drawing complete all as specified and directed :-

150 mm long fancy stainless steel handel with 02 number of SS screws

30 mm / 12 inch side mount manual telescopic channel

Supply , fixing & setting of 100 mm thick (40 density) foam cusion (Kurlon /Sleepwell/ Feather Foam) for seat of Sofa set four / five / single seater (FD-281,FD/MAP-II/02) of approved quality as per Drg, complete all as specified and directed.

Supply , fixing & setting of cover of cushion of size 21" X 22" X 4" made of tapestry cloth (Costing not less than Rs 320 per meter) of approved quality and providing zip on 03 sides excluding one side for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed.

M&L for replacement of SS/brass lock 6 lever with key (Godrej Pattern). (For Almirah Small, Large and 1/2S /2H)

Material & labour for removing of unserviceable particle board part of the furniture then supply and fix new part made of 18 mm thick pre laminated particle board of teakwood face exterior grade as per existing size as mentioned in drawing, complete all as specified and directed.

S&F for replacement of old unserviceable with new Stainless Steel Pegs (Minimum 120 mm long) complete all as specified and directed.

Material & labour for fixing of 18 X 4 mm thick teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed.

Material & labour for replacement of "Nylon Buffers " of Wooden furniture (Chair Dining offr, Chair Easy, Teapoy, Table Centre, Table Peg, Table dining, Table card etc ) including screws complete all as specified and directed.

Material & labour for fixing of " 75 mm fancy SS handels " to be fixed from inner side with secres & washer to d furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed.

Material & labour for fixing of " 70 X 70 X 30 mm wooden corner after polishing with 02 Nos of screws" to various wooden furniture (Chair Dining, Chair Dining Officers, Chair Writing, Table Writing, Dining Table etc), complete all as specified and directed.

S&F in replacement of 12 mm thick BWR Plywood to subject furniture as per drawing complete all as specifice and directed.

M&L for removing old paint using mechanical grinder and from following steel furniture and apply one coat of spray painting of synthetic enamel paint (Colour as decided by Eng-in-Charge) over a coat of red oxide primer as per drg complete all as specified and directed :-

All as per item No 77 above but for Table Office Officer Steel (FD-1002 )

All as per item No 77 above but for " Almirah Steel Large with shelves (Drg No FD-1031)"

All as per item No 77 above but for" Almirah Steel Small with shelves (Drg No FD-1032) "

All as per item No 77 above but for " Teapoy Varandha Steel (Drg No : FD/E6/MAP/17)"

All as per item No 77 above but for" Chair Varandha (Drg No : FD/MAP-II/06) " & " Chair Varandha (Drg No : FD-359) "

All as per item No 77 above but for" Rack Steel open 1830 X 380 X 910 mm"

All as per item No 77 above but for" Rack Steel open 1830 X 760X 1905 mm"

All as per item No 77 above but for" Table with drawer 600 X 900 FD-1008 "

All as per item No 77 above but for" Rack Shoe Steel FD/E6/MAP/02/R "

All as per item No 77 above but for" Charpoy Steel (FD: ED/MAP-II/01 "

All as per item No 77 above but for" Bed Hard Steel (FD: E6/MAP/08(R)) "

All as per item No 77 above but for " Almirah Steel Large 1/2 S 1/2 H"

All as per item No 77 above but for " Charpoy Folding IP Hard Top"

All as per item No 77 above but for " Table Computer FD/E6/MAP/03"

M & L for French polishing to wooden furniture after removing the dirt and dust using mechanical grinder and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed :-

All as per item No 78 above but for " Table Centre Drawing No FD- 274"

All as per item No 78 above but for "Chair Dining Officers (Drg No : FD/MAP-II/04)"

All as per item No 78 above but for "Table dining 6 person (Drg No FD/ MAP-II/03)"

All as per item No 78 above but for "Table dining 4 person (Drg No FD/ MAP-II/03)"

All as per item No 78 above but for "Table Peg (Drg No FD-384) "

All as per item No 254 above but for "Teapoy (Drg No FD-382) "

All as per item No 78 above but for "Table writing (Drg No : FD-275)"

All as per item No 78 above but for " Chair Easy (Drg No FD-229)"

All as per item No 78 above but for " Sofa Five Seater FD- 281 & FD / MAP-II/02"

All as per item No 78 above but for " Hat Stand with Mirror FD-361"

Material & labour for fixing of magnetic door holder to required furniture including 02 nos of 15 mm screws, Complete all as specified and directed.

M&L for fixing of steel part by 10 to 20 mm welding and then grinding to smoothen the surface and then applying enamel paint over a coat of redoxide primer complete all as specified and directed.

PREMIER HOOD HOUSE (BID ID -3147469)