REPAIR TO CERTAIN WOODEN AND STEEL FURNITURE AT VARIOUS MD OTM ACCN BSO YARD AND AMBERNATH UNDER GERD PASHAN PUNE

Amount

Note for all items of BOQ :- (a) The site for the proposed work will be the AOR of GE(I) R&D Pashan and the contractor has to make arrangements for repairing/maintenance of the furniture accordingly. (b) Furniture must be transported/shifted for repairing to the BSO yard of GE(I) R&D Pashan from the respective locations and repaired furniture will be delivered to the location from where it was taken out. (c) Contractor has to quote the rates accordingly in order to mitigate the difference arising between the department and the contractor of later date. Any damages arising due to mishandling of furniture, contractor has to replace free of cost up to the satisfaction of the GE. SCHEDULE 'A' PART I (Repair to wooden furniture) :- POLISHING TO WOODEN FURNITURE :- Material and labour for removing of old polish of the following wooden furniture by rubbing with and including sand paper of proper size and description and making the surface smooth and clean and polishing on all visual surfaces (internal and external as shown on drawings) with first quality wood colour french polish on all exposed surfaces with glossy finish complete all as specified and directed by Engineer incharge and shown on drawings .( Note- Work Shall be executed at site and location as directed by BSO) (a) Chair Dinning . Drg no- FD-203, 279

(b) Chair Easy. Drg no- FD-201, 229

(c) Chair writing. Drg no- FD-202, 280

(d) Chair WB. Drg no- FD-225, 285

(q) Hard Bed with Plywood top. Drg no- FD-245, 246 and 247

(r) Sofa set 4 or 5 seater. Drg no- FD-234,373 and 281

(t) Table center. Drg no- FD-235

(g) Table Dinning 6/8 person of size 1500 mmx900 mmx760 mm. Drg no- FD-239, 376, 273

(e)Table of size 900 mmx600 mmx760 mm. Drg no- FD-284,283

(f) Table writing of size1145 mm x 600 mm x 760mm. Drg no- FD-249, 275,268

(h)Table of size 900 mmx900 mmx760 mm .Drg no- FD-291,DB-3975

(j) Teapoy (W) . Drg no- FD-232, 278

(k) Peg table. Drg no- FD-277, 236

(l) Table Dressing ladies with mirror. Drg no- FD-251

(m) Table Dressing gents with mirror .Drg no- FD-230/379

(n)Table office clerk wooden. Drg no-DB-4120

(o)Table Office officer wooden. Drg no- DB-4119

(p) Table Bed side. Drg no- FD-248, 276

(q) Side Board. Drg No-1112

REPAIRING TO WOODEN FURNITURE Chair Dinning CB (Drg no- FD-202, 279/ FD-285) :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for chair dinning CB of same size as per drawings complete all as specified and directed by Enginee incharge ( Note- Work Shall be executed at site/location as directed by BSO). (a) Front Leg of size 55mm x 30mm x 440mm

(b) Rear Leg of size 65mm x 45 mm x 890mm

(c) Side Rail/front rail (Canning patti) of size 65mm x 30mm x440mm

(d) Back Rail of size 45mm x 35 mm x 405mm

(e) Stiffener of size 25mm x 20 mm x 430mm

CHAIR EASY :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for CHAIR EASY of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work shall be execucuted at site/ location as directed by BSO) Drg no-FD-201, 229, DB-3960 (a) Fornt Leg of size 50mm x 25mm x 545mm

(b) Rear Leg of size 55mm x 25mm x 490mm

(c) Side Rail/front rail (Canning patti) of size 55mm x 25mm x 510mm

(d) Arms rest

(e) Back Rail of size 50mm x 25mm x 480mm

(f) Stiffener of size 25mm x 20mm x 450mm

Chair writing :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for chair writing of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-202, 250 & 280 (a) Fornt Leg of size 45mm x 45mm x 685mm

(b) Rear Leg of size 65mm x 45mm x 890mm

(c) Side Rail/front rail (Canning patti) of size 65mm x 30mm x 535mm

(d) Back Rail of size 65 mm x 30 mm x 470mm

(e) Arms rest

(f) Stiffener of size 25mm x 20mm x 535mm

Table 900mm x 600mmx 760mm (W)/ Table writing 1145x600x760mm :-Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Table of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ Location as directed by BSO) Drg no- FD-284, 283/ FD-249,268 & 254 (a) Leg

(b) Top rail for table of size 900 mmx600 mmx760mm

(c) Bottom rail

(d) Stiffener/Bracket

(e) Table Top 18mm thick prelaminated particle board (Grade I type II IS : 12832) for table of size 900mmx600mmx760mm

(f) Table Top 18mm thick prelaminated particle board (Grade I type II IS : 12832) for table of size1145 mmx600 mmx760mm

(g) Top rail short for table of size1145mmx600mmx760mm

Table dinning 6 or 8 person (1500mmx900mmx760mm) :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Table dinning 6 or 8 person of same size as per drawings complete all as specified and directed by Enginee incharge.( Note- Work Shall be executed at site/location as directed by BSO) Drg no- FD-239, 273, 376 (a) Leg of size75mm x40mmx 760mm

(b) Top Long rail of size 25mm x100mm x 1500mm

C) Top short/Bottom rail of size 25mm x 100mm x900mm

(d) Top Stiffner of size 100mm x25mm x 900mm

(e) Table Top 18mm thick prelaminated particle board (Grade I type II IS : 12832)

Teapoy :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Teapoy of same size as per drawings complete all as specified and directed by Enginee incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no-FD-278/ FD255 (a) Leg of size 60mm x30mm x540mm

(b) Top rai of size20mm x50mmx 600mm

(c) Bottom rail of size 20mm x50mm x 600mm

(d) Stiffner Rail of size 20 mmx40mm x300mm

(e) Teapoy Top 18mm thick prelaminated particle board (Grade I type II IS : 12832) for Teapoy.

Peg table :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Peg table of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-277 (a) Leg of size 30mm x50mmx 380mm

(b) Top rail of size 20 mm x 40mmx 450mm

(c) Bottom rail of size 20mm x 40 mm x 300mm

(d) Table Top 18mm thick prelaminated particle board (Grade I type II IS : 12832) for peg table.

Table Dressing Ladies with Mirror :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Table Dressing Ladies with Mirror of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-251 (a) Drawer with knob

(b) Sliding glass pane 4mm thick for drawer

(c) Looking glass (Make -Atul/Modi/Goldenfish) of size 366 mm x 1220mm x 4mm thick

(d) long rail (Looking glass frame) of size 35mm x 45mm x1220mm

(e) Short rail (Looking glass frame) of size 35mm x 45mm x 366mm

(f) Back ply 6mm thick for back side of glass of size 366mm x 1220mm x 6mm

Table Dressing Gents with mirror :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Table Dressing Gents with mirror of same size as per drawings complete all as specified and directed by Engineer- in-charge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-230/379 (a) Drawer with knob

(b) Looking glass of size 380mm x 760mm x 4mm thick(Make -Atul/Modi/Goldenfish)

(c) long rail (Looking glass frame)of size 25mm x 35mm x1750mm

(d) short rail (Looking glass frame) of size25mm x 35mm x380mm

(e) Back plywood 6mm thick for back side of glass of size 380mm x760 mm x6mm

Bed Hard Plywood Top :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Bed Hard Plywood Top of same size as per drawings complete all as specified and directed by Engineer-in-charge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-246 and 247 (a) Plywood Commercial of size 6' x 3' x 12mm

(b) Head board of 1st class hard wood (Teak wood) to match with existing.

(c ) Foot board of 1st class hard wood (Teak wood) to match with existing.

(d) Long rail of size 90mm x35mm x 1880mm of 1st class hard wood (Teak wood) to match with existing.

(e) Fixing only short rail made from old retrived long rail complete all as shown on drg.

(f) Stiffener for Bed of size 40mm x60mm x900mm of 1st class hard wood (Teak wood) to match with existing.

SOFA SET 5 SEATER :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for SOFA SET 5 SEATER of same size as per drawings complete all as specified and directed by Engineer- in-charge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-281, 234 & 373 (b) Arm

(c) Front leg

(d) Rear leg

(e)Back Rail

(f) Front Long Rail

(g) Rear long rail

Table Centre :- Supply and fix in repair the following new part/component of Seasoned Teak wood (1st class hard wood) for Table centre of same size as per drawings complete all as specified and directed by Engineer-in-charge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-29, 235 & 274. (a) Leg

(b) Top rail Long

(c) Top rail Short

(d) Stiffner Rail

(e) Table Centre Top 18mm thick prelaminated particle board (Grade I type II IS : 12832)

Table Bed Side :- Supply and fix in repair the following new part/component of Table bed side of same size as per drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no-FD/E6/MAP/02(R), FD/E6/MAP/15(R) & FD-276. (a) Back Plywood 6mm thick

(b) Side Pannel of Pre laminated Particle board 18 mm thick (Grade I type II IS : 12832)

(c) Shelf of prelaminated particle board 18mm thick (Grade I type II IS : 12832)

Side Board :- Supply and fix in repair the following new part/component of for Side board of same size as per drawings complete all as specified and directed by Engineer- in-charge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- 1112 (a) Back Plywood 6mm thick

(b) Side Pannel of pre laminated particle board 18mm thick (Grade I type II IS : 12832)

(c) Shelf of pre laminated particle board 18mm thick (Grade I type II IS : 12832)

(d) Knob for Drawer (ISI Marked )

Teapoy Varandah :- Removing the old unserviceable Top of teapoy Vearandah and supply and fixing the new Top of 18mm thick Pre laminated particle board (Grade I type II IS : 12832) top of same size as per drawings complete all as specified and directed by Enginee incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no-FD/E6/MAP/17

CANNING PORTION :- Material and labour in repair for recanning with new standard first quality cane 2mm wide ( Make -Maharastra cane white colour) plastic cane half round type with and including border of 4mm wide half round plastic cane ( Make- Maharastra Cane white colour ) of the same colour and quality as shown on drawings complete all as specified and directed by Engineer incharge.( Note- Work Shall be executed at site/ location as directed by BSO) (a) Chair Easy . Drg no- FD-229

(b) Chair Writing . Drg no- FD-280

(c ) Chair Dinning . Drg no- FD-279

Chair Verandah :- Material and labour in repair for recanning with new standard first quality cane 4mm wide white plastic cane half round type matt pattern (Make :-Maharastra cane white colour) as shown on drawings complete all as specified and directed by Enginee incharge.( Note- Work Shall be executed at site/ location as directed by BSO) Drg no- FD-359

SCHEDULE 'A' PART -II (Repair of steel furniture) Almirah Large Steel /Almirah Medium Steel :- Supply and fix in repair the following new part and repair with respective, and making smooth and fine the part , body of Almirah steel Large and medium of same size as per drawings complete all as specified and directed by Engineer incharge. (Note- Work Shall be executed at site/ location as directed by BSO). Drg no- FD-67 (M), FD-1031, FD-114 (M), FD-104 (M),FD-350,Fd- 1032,,104(M) & 243 (a) Leg made out of 18 Gauge thick mild steel sheet.

(b) Shelf made out of 18 Gauge thick mild steel sheet.

(c) Almirah Lock brass with 4 levers grade - I quality with duplicate keys confirming to IS

(d) Chromium plated handle Make : Godrej/ Link/ Harrison

(e) Almirah Locking device with rod

Table Office Clerk Steel :- Supply and fix in repair the following new part of Table Office Clerk Steel of same size as per drawings complete all as specified and directed by Engineer-in-charge. ( Note -Work Shall be executed at site/ location as direced by BSO) Drg no- FD-84 (M)/1004/FD-84(M)/1003 (a) Drawer made out of 20 Gauge thick mild steel sheet.

(b) Lock 4 lever of brass grade I quality conforming to IS of drawer with and including duplicate key. Make : Godrej/ Link/ Harrison.

( c) Table Top 18mm thick prelaminated Particle board (Grade I type II IS : 12832) and edges covered with and including 1st class hard wood( teak wood) beading

(d) Door of unit made out of 20 Gauge thick mild steel Sheet.

Table Office Officer Steel :- Supply and fix in repair the following new part of Table Office Officer Steel of same size as per drawings complete all as specified and directed by Engineer incharge. ( Note -Work Shall be executed at site/ location as directed by BSO) Drg no- (a) Drawer made out of 20 Gauge thick mild steel sheet.

(b) Lock 4 lever of brass any type grade I quality of drawer with and including duplicate key. Make : Godrej/ Link/ Harrison.

( c) Table Top 18mm thick Particle board laminated (Grade I type II IS : 12832) and edges covered with and including 1st class hard wood( teak wood) beading

(d) Door of unit made out of 20 Gauge thick mild steel Sheet.

CHAIR CBA STEEL :- Supply and fix in repair the following part of chair CBA steel of teak wood frame with and including godrej pattern weaved cane of 2mm thick ( make- Maharastra cane white colour) all as specified and directed and shown on drawings.( Note -Work Shall be executed at site/ location as directed by BSO) (a) Seat of chair

(b) Back of chair

Chair revolving Executive high back :- Supply and fix in repair Seat and Back, Foam and fabric of chair polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high quality Make : 'D' Decor, (as approved by Garrison engineer) of Chair revolving Executive high back of same size as per drawings complete all as specified and directed by Engineer incharge. Note: Seat and Back shall be fixed as per Trade Pattern. (High Back). and Work Shall be executed at site/ location as directed by BSO. Drg no- TP

Supply and fix in repair the following new part and repair with respective of chair revolving executive high back of same size as per drawings complete all as specified and directed. (Work shall be executed at site/location as directed by BSO.) Drg No - TP (a) Base leg of steel with caster wheels ( Make -Commander )

(b) Lifting Handle

(c) Arms rest

Chair revolving Executive low back :- Supply and fix in repair for Seat and Back, foam and fabric of chair polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high quality Make : 'D' Decor (as approved by Garrison engineer) of Chair Revolving Executive low back including new prong with nylon 10.5mm dia zinc plated MS caster including hydrolic gas lift as per existing of same size as per drawings complete all as specified and directed by Engineer-in-charge Note: Seat and Back shall be fixed as per Trade Pattern. (Low Back). and Work Shall be executed at site/ location as directed by BSO) Drg no- TP

Supply and fix in repair the following new part and repair with respective of chair revolving executive low back of same size as per drawings complete all as specified and directed. (Work shall be executed at site/location as directed by BSO.) Drg no- TP (a) Base leg of steel with caster wheels ( Make -Commander )

(b) Lifting Handle

(c) Arms rest

CHAIR VISITOR:- Supply and fix in repair seat and back polyurethane foam 50 density for back and 75 density for seat duly covered with and including approved quality fabric with and including PVC lipping alround. Tapestry cloth should be of high quality Make : 'D' Decor (as approved by Garrison engineer) of chair Revolving and the following new part of chair Revolving of same size as per drawings complete all as specified.and directed by Engieer- in-charge ( Note -Work Shall be executed at site/ location as directed by BSO.) Drg no- TP (Arm rest shall be measured and paid for separately herein after).

(a) Arm rest match with existing

Chair Computer :- Supply and fix in repair upholstery with approved quality and pattern, for Seat and Back, foam and fabric polyurethane Foam 50 density for back and 75 density for seat duly covered with and including approved quality Fabric with and including PVC lipping all around.Tapestry cloth should be of high qualityMake ; 'D' Decor (as approved by Garrison engineer) of Chair Revolving and the following new part, of Chair Computer of same size as per drawings complete all as specified and directed by Engineer incharge. Note: Seat and Back shall be fixed as per Trade Pattern. (Low Back). and Work Shall be executed at site/ location as directed by BSO) Drg no- TP

Supply and fix in repair the following new part and repair with respective of Chair Computer of same size as per drawings complete all as specified and directed. (Work shall be executed at site/location as directed by BSO.) Drg No - TP (a) Base leg steel with caster wheels ( Make-Commander )

(b) Lifting Handle

(c) Arm rest match with existing

PAINTING TO STEEL FURNITURE :- Material and labour for removing old paint of following steel furniture item by rubbing with sand paper of proper size and description and make the surface smooth and clean internal and external as shown on drawing Including removing of dent if any and applying Spray Painting with two coats of 1st quality synthetic enamel paint (OG/Smoke Gray/White) Over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer incharge and as shown on drawings. ( Note -Work Shall be executed at site/ location as directed by BSO) (a) Almirah large steel with shelves Drg no- FD-103, 1031 & 351

(b) Almirah medium steel with shelves Drg no- FD-1034, 243 & 1032

(c) Table office clerk steel with drawer Drg no- FD-84 (M) & FD-1004

(d) Table office officer steel with drawer Drg no- FD-84 (M) & FD-1003

(e) Book case large steel Drg no-FD-120 (M)

(f) Chair CBA steel with Arms Drg no-FD-75 (M)

(g) Locker Bed side steel Drg no-FD-127 (M)

(h) Rack side steel 3/4 space Drg no- FD-97 (M), FD-106 & FD-1023

(j) Chair varandah Drg no- FD-259 & FD/MAP-II.06

(k) Teapoy varandah Drg no-FD-255

(l) Table executive with drawer and ERU Drg no- TP

(m) Rack steel open large Drg no- FD-1037

(n)Chair Revolving ( Frame Only ) Drg no-

(n)Charpay GI Pipe (Frame only)

SOFA SET 5 SEATER :- supply and fix in repair cushion foam 40 density having size 530mm x 560mm x 100mm ( Make :- Kurlon/Sleep well) covered with and including high quality tapestry cloth Make 'D' Decor made with and including cover on Gada cloth duly zipped with and including PVC Zip (Openable type) of SOFA SET (3+1+1)5 SEATER in same size as per drawings complete all as specified and directed by engineer incharge( Note -Work Shall be executed at site/ location as directed by BSO)

CHAIRPOY G I PIPE WITH PLYWOOD TOP :- Supply and fix in repair the following part/component of Cahrpoy GI Pipe with ply top of same size including necessary welding as required as per drawings complete all as specified and directed. (Work shall be executed at site/location as directed by BSO) Drg No- FD-220 :- (a) Plywood of size 1980mm x 900mm x 12mm thick both side commercial plywood top BWR grade finol bounded ISI Marked ( Make -Green Ply, Kitply, Century, Orchid Ply) with including MS flat iron of size 900mm x 32mm x 5mm thick (04 Nos in each charpoy) duly welded at both side in equal distance of chairpoy GI Pipe as per drawings and two coats painting with synthetic enamel paint over a coat of primer, Plywood shall be fitted on chairpoy with purpose made round headed steel nuts,bolts and washers as directed for each chairpoy through suitable drill machine holes of appropriate size of CHAIRPOY G I PIPE WITH PLYWOOD TOP including retighting the frame as per drawings complete all as specified and directed by Engineer incharge.

(b) GI long rail pipe 1800mm x 32mm dia

(c) GI short rail pipe 750mm x 32 mm dia made from old serviceable long rail

(d) GI short rail pipe 750mm long x 32 mm dia

(e) Elbow 3 way G I 32mm dia

KASTURILAL HARICHAND OHRI AND SONS

Madina Traders

Rays Breakers

M/s Mitesh Agencies

M/s S.R lahoti