Rennovation of PMU Totu Building

Amount

Demolishing brick work manually/by mechanical means including stacking of servicable material and disposal of unservicable material within 50 mtr lead as per direction of engineer-in-charge. In cemant mortar

Taking out the door, windows and clerestory window shutters (steel or Wood) including stacking within 50 meters and above.

Dismantling steel work in single section including dismembering and stacking within 50 metres lead in Channels, angles, tees and flats porch truss

Dismantling of flushing cistern of all types (C.I/PVC/vitrious china including stacking of useful materials near the site and disposal of unserviceble materials within 50 meters lead.

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board , incliding providing and fixing of frame work made of special section power pressed /roll form G.I. sheet with zinc coted of 120 gms /sqm ( both sides inclusive ) , consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and .50 mm thick , fixed to the floor and ceiling at spacing of 610 mm centre to centre with dash fastener of 12.5mm dia meter 50 mm lenghth 50 mmm lenght or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having flange of 34mm and other flange 36 mm and .50 mm thick fixed vertically within flanfges of floor and ceiling channel and placed at a spacing of 610 mm cecentre to centre by 6mm dia bolts and nuts includiing fixing of studs along both ends of partition fixed flushe dto wall with suitable anchor fastener or metal screws with nylon plugs atspacing spacing of 450mm centre to centre and fixing to of boards to both sides of frame work by 25 mm dia 25mm dry wall screws on studs floors and ceiling channels at the spacing of 300 mm centre to centr the boards to be fixed to th eframe work with joints staggered to ovoid through cracks , galavanised M.S. fixing channel of 99 mm width (.9mm thick having twi flanges of 9.5 mm each with zinc coating of 120 gms / sq.m ( bioth sides inclusive ) to be provide at the horizontal joint sof two boards , fixed to th estuds using metal to metal flat head screws including joiting and finishing to a flush finish joiting compound , jointing tape angle ,angle beads at corners (25mmx25mmx0.5mm),joints finisher and two coats of primer suitable for board as per manufacture specification and direction of engineer-in-charge all complete. 75mm overall thickness partition with 12.5mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095:(part 3) : 1996(board with BIS certification marks)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :s in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads and lifts

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1 cement:6sand) including carriage of materials in all leads, lifts and upto all height in foundation and plinth.

15 mm cement plaster in single coat on rough/fair side of brick/concrete/stone wall for exterior plastering in all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) including carriage of materials in all leads and lifts and heights and cost of scafolding. Total Ground floor and first floor Deductions Ground floor door first floor Door A Ground Floor Windows First floor windows B Total deduction a+bx2

12 mm cement plaster of mix 1:4(1 cement : 4 fine sand)

6 mm thick cement plaster to ceiling in cement mortar 1:3 (1cement:3sand) including carriage of materials in all leads and lifts and heights.

Providing wood work in frames of false celling partitions etc. sawn and put-up in sizes including carriage of materials in all leads and liftsposition. Second class Kail wood.

Providing and Fixing Glass panes with denter's metal putty/wooden fillet (where ever required) of deodar Ist class in fixed portions of windows

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately)

Providing and fixing 40x3 mm flat iron hold fast 40 Cm. long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (1cement:3sand:6graded stone aggregate of 20 mm nominal size.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. including carriage of materials in all lead and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete a)250x16mm

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 asper IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completee includingcarriage of materials in all leads and lifts a)200mm x 10 mm

b) 150mm x 10 mm window

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts. a) 100 mm windows Vantilator

b) 125mm doors

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. including carriage of materials in all leads ana lifts.

Two track two panels sliding window made of (big serise) frame 67x50mm /46x62mmboth having wall thickness of 2.3+- 0.2mm and single glaging bead /double glazing of oppropiate dimestion( area of window avobe 2.5sqm.to 4 sq.m)

Provinding and fixing factory made uPVC white colour casement /casement cum fixed glazed door comprising of uPVC multi -chambered frame ,sash and mullion (where ever required ) extruded profiles duly reinforced with 1.60+0.2mm thick glavanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate diamenion 'epdm gasket ,zinc alloy (white powder coated )3D hinges and one handle von each side of panels along with zinc plated mild steel multi point locking having transmission gear,cylinder with keeps and one side key,G.I fasteners100x8mm size for fixing frame to finished wall and necessary stainless steel, screws etc. profile of frame &sash shall be mitred cut and fusion at all corners mullion (if required ) shall be also fusion welded including drilling of holes for fixing hardwere and drainage of water etc.Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quility ,all complete as per approved drawing & sealent shall be paid separately ). Note: for uPVC frame sash and mullion extruded profiles minus 5% tolerance in dimenstion i.e.in depth &width of profile shall be acceptable. variation in profile dimension in higher side shall be made. casement door with 3D hinges made of (big series ) frame 67x64 mm & sash 67x110mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead /double glazing bead of appropaiate dimension .Area of door upto 2.00sqm).

dyherh

25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : including carriage of materials in all leads, lifts and heights, in :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including Carriage of materials in all leads & lifts. Side Skirting

Providing and laying 800 x 800mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

of size 500 x 500 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including carriage of materials in all leads, lifts and heights.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified andas directed by the Engineer-in-Charge. including carriage of materials in all lead and lifts and heights. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent Kitchen counter top

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Porch add 50% for slope

Providing and fixing valley 60 cm overall 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials in all lead, lift and height (Tata/Century wells make).

Providing and fixing thermal insulation of ceiling (under deck insulation) with resin bonded rockwool conforming to IS: 8133,density 48kg/m3, 50 mm thick, wrappeed in 200 G virgin polythene bags fixed to ceiling with metallic cleats(50x50x3mm)@ 60 cm and wire mesh of 12.5 mmx 24 gauge wire mesh for top most ceiling of building.

Finshing walls with 100%premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance ecterior paint of required shaed (company dep[ot tinted)with silicon additives Item same as plaster

New work (two or more coats applied @ 1.43 litre /10sqm. over and including priming coat of exterior primer applied @0.90 litre/10sqm Applying Priming coat

Polishing on wood work with ready mixed wax polish of approved brand and manufacture: new work : Same as panelling

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams /litre with water thinnable cement primer on wall surface having VOC content less then 50 grams / litre Same as panelling

painting (two or more coats ) on rain water, soil, waste and vent pipes and fitings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mised zinc chromate yellow primer on new work: Same as plaster

gdhdgh

Add 12.5% water supply and sewerage

Add 12.5% Electrical

YOGENDER MOHAN SHARMA

Rajender Thakur

Vinay Mandhotra

Pawan Kumar