REPAIR TO TOILETS KITCHEN SUNKEN FLOOR PLUMBING AND SANITARY FITTINGS RWP ETC TO SNCO MD ACCN AND OTHER ALLIED WORKS AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Taking down old cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material area,complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick with CM 1:6 on fair faces of brick surface / stone masonary finished even and smooth without using extra cement,complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care putty,complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of over one coat of alkali resistant primer over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc, complete all as specified and directed by Engr-in-Charge..

M&L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete,complete all as specified and directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 3mm wall care putty,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes , filling cracks with birla white putty and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of ceiling,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors,complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured designer seamless tiles 350x250x7mm/450X350X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 20mm thick in CM 1:6,complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM 1:3,complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) work (table rubbed and polishedin steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite,complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore of pipes,complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting,complete all as specified and directed by Engineer-in-Charge.

S&F in repair MS medium weight 100mm butt hinges, complete all as specified and directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store of 20 mm dia, complete all as specified and as directed.

Ditto as per srl item No 20 above but 15 mm dia, complete all as specified and directed.

S&F water tubing, medium grade, galvanized, with all fittings fixed to wall of 20 mm dia,complete all as specified and directed by Engineer-in-Charge.

Ditto as per srl item No 22 above but 15 mm dia, complete all as specified and as directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP soap dish,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges,complete all as specified and directed by Engineer-in-Charge.. Make- Prayag or equivalent.

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China Wash hand basin, white, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand,complete all as specified and directed by Engineer-in-Charge.

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair,complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange,complete all as specified and directed by Engineer-in-Charge.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed by Engineer-in-Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories),complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors,complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors,complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110mm dia bend any radius,complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 75mm dia bend any radius,complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples,complete all as specified and directed by Engineer-in-Charge.

S&F repair tubular brass chromium plated decorative 20mm curtain rod fixing with brackets,complete all as specified and directed by Engineer-in-Charge.

M/S Subhadip Enterprise (BID ID -3343151)

M/S ASHA ENTERPRISE (BID ID -3342503)

DANATION CONSTRUCTIONS (BID ID -3342532)

M/S SINGH ENTERPRISE (BID ID -3341033)

M/S KUMAR AVINASH (BID ID -3342604)

P .BANERJEE AND CO (BID ID -3346244)

M/S MBS TRADING CO (BID ID -3341582)