Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹24.2 L+₹2.8 L (13.2%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹27.0 L+₹5.7 L (26.7%)Rejected-Finance 430 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208010 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹27.4 L+₹6.0 L (28.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
4 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) B/R Chakeri Kanpur
GE(AF) B/R Chakeri Kanpur
ROUTINE PREVENTIVE AND CORRECTIVE MAINTENANCE AND CLEANING OF SEWAGE SYSTEM AND CONNECTED WORKS IN N1 NAIR KULDEEP AND POWER HOUSE AREA AT AFS CHAKERI KANPUR
2023_MES_617851_1
GE(AF) BR/CHK/T-22 OF 2023-24 8883/E8
Open Tender
Civil Works
Item Rate
330 days
GE(AF) B/R Chakeri Kanpur
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(AF) B/R Chakeri
₹70,000
Yes
1 Nov 2023
8 Sept 2023
11 Oct 2023
8 Sept 2023
4 Oct 2023
22 Sept 2023
Amount
Cleaning of the chocked/blocked sewage lines at a depth not exceeding 1.50 m of any bore through mechanically by Jet Machine or any mechanical means between manholes and removing muck sludge/silt/liquid mud etc (incl foul position) from pipes including taking down cover slab of any type, thickness and size carefully and refixing in same position after necessary cleaning and removing the cleaned sludge out side of MD land in sealed containers on same day complete all as specified and directed .
All as per item No 1 here-in-before but depth exceeding 1.5 m and not exceeding 3 m depth.
All as per item No 1 here-in-before but exceeding 3.00 m and not exceeding 4.5 m depth.
Cleaning of the chocked/blocked manholes/Gully trap/Nahani Trap/Floor trap at a depth not exceeding 1.5 m depth, mechanically by Jet Machine or any mechanical means opening the covers, removing liquid/sludge mixed liquid under any position including foul condition and cleaning the inlets and outlets etc with water, placing the cover back in position and dispoing off the sludge in sealed container on same day, out side of MD land complete all as specified and directed.
All as per item No 4 here-in-before but depth exceeding 1.5 m and not exceeding 3 m depth.
All as per item No 4 here-in-before but depth exceeding 3.00 m and not exceeding 4.5 m depth.
Material and labour for pumping out the rain/waste water, sewage waste from sewage line/Man hole/Septic tank out side the defence area incl provision of pumping etc with diesel engine of 10 HP and one skilled operator incl necessary T&P and accessories etc for disposing of foul water outside the defence area complete all as specified.
M&L Dewatering Sewage Water and Taking out accumulated Night Soils, Sludges, Brick Bats or any other Materials from septic tank mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank (minimum 2000 Litre capacity) from MANHOLES, SEPTIC TANKS, etc., (Depth not exc. 1.50 METRE) as required to keep Complete Sewage System Functional and to avoid any Over Flowing including Removal and Dispossed off pumped out Sewage Water, Sludges in any form or any other Materials, etc. to Outside of Defence Land to a distance exc. 500 METRE and not exc. 1.00 KM and burried Under Ground (minimum 45 Cm covered with Soils, Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit as ordered by JE and/or Engineer-in-Charge so as to keep the Whole Station Area Pollution Free, complete all as specified and as directed. NOTE :- (a) The Item is Measurable/Operative only ONCE during the entire Contract Period. Any additional Cleaning if rquired, Contractor will Clean the same without any Extra Cost to the Department. (b) Each Trip of Tanker to be taken Outside of MD Land in presence of JE in-Charge. (c) Cost of Bleaching Powder, Bamboo Matting, all necessary Earth Works, any other Materials and T&P, etc. as required for Cleaning and Removal will deemed to be included in the QUOTED UNIT RATE.
All as per item No 8.00 but depth exc 1.5 m but n.exc 3.0m complete all as specified and as directed.
Demolition or breaking up drain pipes 450 mm internal dia of bore (salt glazed ware AC or reinforced concrete) set in cement mortar including breaking and removal of bedding and haunching complete all as specified and directed.
-ditto as as per item No-10 here-in-before but 300 mm internal dia of bore complete all as specified and directed.
-ditto as as per item No-10 here-in-before but 200 mm internal dia of bore
-ditto as as per item No-10 here-in-before but 150 mm internal dia of bore complete all as specified and directed.
M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in bed to drain pipes of 450 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
-ditto as as per item No-14 here-in-before but 300 mm internal dia of bore complete all as specified and directed.
-ditto as as per item No-14 here-in-before but 200 mm internal dia of bore complete all as specified and directed.
-ditto as as per item No-14 here-in-before but 150 mm internal dia of bore complete all as specified and directed.
M&L for Reinforced concrete pipes of dia 450mm class NP3, laid and jointed complete with collars complete all as specified and directed.
-ditto as as per item No-18 here-in-before but 300 mm internal dia of bore complete all as specified and directed.
-ditto as as per item No-18 here-in-before but 200 mm internal dia of bore complete all as specified and directed.
-ditto as as per item No-18 here-in-before but 150 mm internal dia of bore
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.
M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
All as per item No 23 above but except bricks. Note: Old bricks obtained from item No 22.00 shall be reused after cleaning.
M&L plain cement cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed.
Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound all as specified and directed.
M&L for preparation of nely plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Demolition of reinforced cement concrete of any descrption and in any position not otherwise specially provided for complete all as specified.
M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab/drain cover etc or any other similar work set in CM 1:6 including necessary form work complete all as specified and directed.
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending spirally for lintels and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator)/manualy in foundation trenches or drains/laying of sewage pipe or similar work (not exceeding 1.5 in depth and width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 including getting out complete all as specified and directed.
All as per item No 33.00 here-in-before but exc 1.5 depth and nexc 3.00 m depth.
All as per item No 33.00 here-in-before but exc 3 depth and nexc 4.500 m depth.
Demolition of PCC of any descrioption (unreinforced) and in any position not otherwise provided for complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 as in base or foundation filling and mass concrete complete as specified and directed.
M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surfaces channel and drains complete all as specified and directed.
M & L 75 mm thick cement concrete type C-2, 1:3:6 mix, (20 mm graded aggregate) as in plinth protection, including finishing even & smooth without using extra cement, complete all as specified and directed.
Extra for forming fair finished drain or channel up to 45 cm inner girth in cement concrete, using extra cement including forms, moulds,/stopped ends etc. complete all as specified and directed.
Cutting into existing manholes for connecting new drain of 150 mm dia and over, making good to pipes and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and as directed.
Dismantling of cast iron pipes 100 mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.
Dismantling of cast iron pipes 75 mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.
S&F cast iron centrifugally cast , hubless soil waste and vent pipes of 100 mm dia in any length fixed to walls as per manufacturer's instruction complete all as specified and directed.
All as per item No 44.00 above but 75 mm dia complete all as specified and directed.
S&F 75 mm bore, cast iron bends any radius complete all as specified and directed.
S&F 100 mm bore, cast iron bends any radius complete all as specified and directed.
S&F in repairs PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
All as per item No 48.00 here-in-befor but 75 mm dia.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
All as per item No 50.00 but 75 mm dia complete all as specified and directed.
Dismantling of stone slab/tiles of any position or thickness in floor, aprons, laid, bedded and pointed in any mortar, complete all as specified and directed.
Demolition Plain Cement Concrete (Un-reinforced) in ground floors or pavings not exc. 15cm thickness (Below or above Ground level) complete all as specified and directed.
M & L for 75 mm thick cement concrete type D-2 (1:4:8) using 40mm graded aggregate as in sub base to floor finished rough to receive finishes complete all as specified and as directed
Supply and and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc, of required strenth, thickness & size shape mady by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory, filling the joints with sand and cutting of pver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for plain cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) around the interlocking tiles/becnhing and haunching complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.
Dismantling timber scantling, unframed, 40 sq cm and over in section in any position complete all as specified and directed.
M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails and guided for sliding doors, frame work for chajjas/rain gaurd, fixed with angle cleats or other connecting plaste including cutting, welding etc Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.
S&F for coloured pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.
Material and labour for preparation of newly or previously untreated steel or iron surfaces and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.
Removal of excavated material n. exc 50 m where directed and spreading in low lying area complete all as specified and directed.
S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.
Dismantling of mild steel work of any description not otherwise provided for etc. complete all as specified and directed.
S&F chain link fencing of 4mm dia galvanised steel wire chain link fencing of 100x100 mm mesh, made up into mattresses or cage, lapped wired and laid in position incl taking down old existing complete all as specified and directed.
S & F mild steel work as in gate, post,struts & Flat Iron for supporting in fencing including cutting top to shape as desired, drilling holes, notching of wire etc. complete all as specified and directed.
Excavation in post holes each not exceeding 0.50 Cum, getting out, returning filling, in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in Hard/Dense soil as including taking out existing Post etc complete all as specified and directed.
M & L for mild steel round bars 10 mm dia and over cut to length bent to shape as required horizontally woven in chain link fencing complete all as specified and directed.
S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed at the another end and fitted with washer and one hexagonal or square nut 5 to 10 mm dia, exceeding 10 cm but not exceeding 15 cm long complete all as specified and directed.
Note for Item No 1 to 51 : - (a) The contractor shall employ adequate numbers of tradesman/labour for timely completion of the complaint as per time frame given below :- (i) Priority-I : Complaints pertains to major blockage of sewage upto first manhole, blockage of kitchen trap and floor trap/Nahani trap will be attended on priority-I and the same will be completed within 4 to 8 hrs. (ii) Priority-II : Complaints pertains to major water leakage, blockage of sewage beyond first manhole and placing of manhole cover will be attended on priority-II and the same will be completed within 24 hrs. (iii) Priority-III : Complaints pertains to renewal/replacement of sewage line/gutters will be attended on priority-III and the same will be completed within one week. (iv) Contractor or his supervisor shall collect the complaint/job card from JE concerned between 0900 hrs to 1000 hrs on all working days and deposited the same after completion of job duly signed by user/occupants on next day. (v) Summary of complaints will be prepared by the contractor and put up to Engineer-in-Charge last date of every month. (vi) If contractor fails to attend the complaint as per time framed given in Para (i) to (iii), above, Rs 50/- per complaint per hour for ser No (i) and Rs 250/- per complaint per day for ser No (ii) & (iii) above will be recovered from the RAR/Final bill.
SHUSHILA TRADERS AND CONSTRUCTION
JOG CONSTRUCTION
SUSHMANAND ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .