Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹84.6 LAWARDED | AWARDED |
Tender Value
₹84.7 L
EMD Value
₹2 L
Closing Date
16 Jun 2025, 10:00 pmClosed
Directorate of Municipal Administration
Yatri Nivas
DMA/2025-26/BD/WORK_INDENT39279
DMA/2025-26/BD/WORK_INDENT39279
Open
Buildings
Two Tender Document System(Two Cover)
DMA Town Panchayat Kotturu
₹2,120
₹2 L
31 May 2025
31 May 2025
17 Jun 2025
16 Jun 2025
Construction of Yatri Nivas continuation work at 1st Ward Budda Circle Near Old Town Panchayath Place.
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifcations, incl...
Filling available excavated earth(excluding rocks) in sides of the foundation upto plinth in layers not exceeding 20 cms etc.. Complete as per specification (Vol -1, P No.7, I.No 1.9)
Providing and laying in position plain cement concrete Mix 1 : 4 : 8 ( M7.5 ) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/tr...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS Codes machine mixed...
Providing TMT steel reinforcement for RCC works including straightening cutting, bending, hooking placing in position laping etc., complete as per specification. (Vol-2, P.No.84, I.No.11.32)
Additionalities for Form Work, Centering & Scaffolding for concrete works percentage on finished rates.-footing
Additionalities for Form Work, Centering & Scaffolding for concrete works percentage on finished rates.- column
Additionalities for Form Work, Centering & Scaffolding for concrete works percentage on finished rates.-plinth beam
Additionalities for Form Work, Centering & Scaffolding for concrete works percentage on finished rates.- lintel, stairs and roof beams
Additionalities for Form Work, Centering & Scaffolding for concrete works percentage on finished rates.-roof slabs
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1
cement : 6 coarse sand) including cost of all materials, labour...
Providing mathi/nandi wood frames of Doors, Windows wrought framed or assembled including making plaster groves etc., complete as per specification (Vol-2, P.No.100, I.No.12.12)
Providing and fixing in position fully panelled mathi wood shutters for Doors styles and rails of 30mm thick etc., complete as per specification (Vol-2, P.No.100, I.No.12.16)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 15mm thick cement plaster in single coat with CM 1:6 of brick masonry including rounding off corners wherever required smooth rendering providing and removing ascaffolding including cost o...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fne sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and laying vitrifed floor tiles, size of Tile 600x600 mm (thickness to be specifed by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and laying flooring and steps fine machine polished granite stone
slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished
with cement mortar 1:3 over existing cement con...
Grouting the joints of flooring tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10
kg of hardener and 0.20 kg of resin per kg), includi...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Providing applying two coats with oil bound washable distemper
of approved brand and shade on wall surface including priming
coat etc., complete as per specifiactions. (Vol-2, P.No.45, I.No.8.25)
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Providing and finishing external walls in two coat with water proof
cement paint of approved brand and shade to give on even shade
etc., as per specifiactions. (Vol-2, P.No.45, I.No.8.28)
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
Painting on G.S. sheet with synthetic enamel paint of approved brand
and manufacture of required colour to give an even shade :Old work (one
coats) as per specifications and as per directions of Engin...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fit...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and laying water proofing treatment to the Roof with PU based
single component elastomeric pure polyurethane based coating on New
terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying water proofing treatment to the Water tanks & Liquid
Retaining structures with two component acrylic polymer modified
cementitious waterproofing membrane with minimum elongation o...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick
confirming to IS 2509 with suitable size bends, junction boxes,
adhesive paste etc , and fixing using inverted wood plugs in case of...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick
confirming to IS 2509 with suitable size bends, junction boxes,
adhesive paste etc , and fixing using inverted wood plugs in case of...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the ...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 135 x 75 x 65 mm
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 180 x 90 x 65 mm
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 200 x 90 x 65 mm
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 135 x 160 x 65 mm
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 200 x 200 x 65 mm
Supplying and fixing PVC/metal conduit Deep junction box- 32 mm deep Junction box
Extra for Groove cutting in brick wall/CC floor to the suitable depth
for concealing of Conduit/GI pipe and plastering, finishing upto
wall surface complete upto 50 mm conduit in brick wall
Extra for Groove cutting in brick wall/CC floor to the suitable depth
for concealing of Conduit/GI pipe and plastering, finishing upto
wall surface complete upto 50 mm conduit in CC floor
Supplying And Fixing Metal Fan Box with Round Hook
Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod.
Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supply and laying of underfloor (concealed) raceways manufactured from 1.5 mm thick cover and base (including partitions for multicompartment raceways), zero spangle pre-galvanized sheet steel with 27...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.- 6A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.- 6A Two Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.- Stepped Fan Regulator Two Modul
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.- 32A DP Switch
Supplying and fixing of metal clad industrial plugs and sockets. 2pole+earth 250V SOCKET 16A
Supplying And fixing/replacing of 6A Pendant Holder
Supplying And fixing/replacing of 6A Batten Holder
Supplying And fixing/replacing of switch cover
Supplying And fixing/replacing of seiling plate
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying and fixing of Modular MCB Devices (Tripper) With
Breaking capacity of 6kA
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with
bracket blades complete for light duty suitable to operate on 230V
50Hz, AC Supply
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 6.5.1 400 mm Sweep
Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling lamps, LED of Power COB with CCT 6...
Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling lamps, LED of Power COB with CCT 6...
Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI LED light fitting 1 x4 - 36/40 W
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .