Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC HARINAGAR BEHIND MAHESHWARY MARKET PO TATISILWAI DIST RANCHI PIN 835103 | RANCHI | JHARKHAND | 835103 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹24.0 L+₹56,389 (2.40%)Rejected-Finance 20 23 MANASKAMANA ROAD BANSBARI MORE PS ENGLISHBAZAR DT MALDA | ENGLISHBAZAR | MALDA | WEST BENGAL | 732101 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹24.3 L+₹88,309 (3.77%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹24.5 L+₹1.0 L (4.34%)Rejected-Finance VIKASH NAGAR ROAD NO 1 NEAR GAUSHALA RAMGARH CANTT JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹24.5 L+₹1.1 L (4.67%)Rejected-Finance KUSUM VATIKA SHIV SHAKTI NAGAR KOKAR RANCHI 834001 | RANCHI | JHARKHAND | 834001 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹22.9 L
EMD Value
₹46,000
Closing Date
21 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT P.O. HOTWAR RANCHI - 834012
SPL REPAIRS TO KLP OFFRS MD ACCN BLDG NO P-7/3, P-11/3 AND P-2/4 AND SPL REPAIRS TO BLDG NO P-10 OF GE DIPATOLI AT RANCHI MIL STATION
2022_MES_548842_1
8000/1829/E8
Open Tender
Civil Works
Item Rate
180 days
Dipatoli
Class E, Category a(i)
8 documents required · 8 mandatory
₹500
Yes
GE Dipatoli
₹46,000
Yes
9 Nov 2022
1 Sept 2022
23 Sept 2022
1 Sept 2022
21 Sept 2022
15 Sept 2022
Amount
Demolition of brick work built in cement mortar or lime mortar complete of any description complete all as specified and directed.
M&L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete all as specified and directed.
M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/ concrete and finished the surface fair and even complete all as specified and directed
M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface fair and even complete all as specified and directed.
M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiliing and finished the surface fair and even complete all as specified and directed.
Complete removal of existing treatment on wall surfaces complete all as specified and directed.
M&L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 3 mm thick to make the surfaces truly smooth complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required) complete all as specified and directed.
M&L for applying one coat of distemper oil emulsion on old surfaces of wall / Ceiling including necessary preparation of surfaces complete all as specified and directed.
M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.
M &L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar beding layer complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450x 350x 7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc with and including over 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/ dado etc, with and including over 10 mm thick plaster in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.
M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM (1:6) on concrete surface rough finish to recive tiles complete all as specified and directed.
M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar (1:4) finished rough to recive tiles complete all as specified and directed.
Demolition of cement concrete (un reinforced) of any description incl floor tile and in any position not otherwise specifically providedcomplete all as specified and directed.
M&L cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in cills, steps, bed plates etc, complete all as specified and directed.
M&L for applying one coat of weather proof exterior emulsion paint (1st quality) / plastic emulsion paint on walls, chajjas, facia of any height of bldigs etc, including preparing of old surfaces with brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots. (Weather coat shall be of Asian paint, Apex, Ultima or equivalent as approved by GE) (Mechanical applicator to be used), complete all as specified and directed.
M&L for complete removal of existing treatment on wall of any height of bldigs by brooming down with wire brushing, stoping an applying two coats of exterior weather coat/ plastic emulsion under one coat of primer, complete all as specified and direted (Weather coat shall be of asian paint, Apex, ultima or equivalent as approved by GE)
S&F in repair Vitreous china white wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap, one piece closet with integrated cistern, seat cover and twin flush fittings, complete all as specified and directed.
S&F chromium plated health faucet with 1 m long pipe, complete all as specified and directed.
S&F chromium plated hand shower, complete all as specified and directed.
S&F chromium plated toilet paper holder size 150 x150mm complete all as specified and directed.
S & F in repair PVC valveless syphonic dual flush action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make complete all as specified and directed with fancy design.
S&F in repairs vitreous china wash basin, white flat back size 550x400mm (excluding taps), incl CP waste coupling & PVC waste pipe and brackets, complete all as specified and directed.
S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.
Taking up or down steel tubing and connection of 15 dia bore, complete all as specified and directed.
Taking up or down steel tubing and connection of 20 dia bore, complete all as specified and directed.
Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar (1:3) to ends and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth, complete all as specified and directed.
M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.
Refixing old steel tubing and connections in new or old position 15mm dia, complete all as specified and directed.
M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.
Refixing old steel tubing and connections in new or old position 20mm dia, complete all as specified and directed.
S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed (fancy type)
S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed (fancy type)
S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed (fancy type)
S&F in repairs Brass CP mixer tap 15mm dia bore (three in one) for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed (fancy type)
S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe, complete all as specified and directed (fancy type).
S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower, complete all as specified and directed.
S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges, complete all as specified and directed.
Dismantling existing water tanks 1000 ltr and removing to stores complete all as specified and directed.
S&F in repair hoisting 3 layers PVC tank 1000 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified and directed
Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed
Taking down chowkhat or frame with shutters (without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.
Taking down chowkhat or frame with shutters (without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.
M&L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, complete all as specified and directed.
S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.
S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part-I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.
S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed (fancy type)
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.
Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window
S & F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and directed.
Demolition of reinforced cement concrete/loose concrete above ground floor at height up to 8 m, in any position like roof, landing , staircase, chajja and similar suspended works complete all as specified and directed. Note : - Necessary arrangement for scafolding where required deemed to be included in the unit rate.
Use and waste form work to chullah hoods, chajjas, troughs and similar items in cluding edges complete all as specified and directed.
M & L RCC type B-1 (1:1.5:3) using 20 mm graded stone aggregate as in chajja etc complete all as specified and directed.
S & F mild steel TMT bar 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L kota stone slab 20-25mm thick in riser, tread of steps, skirting, dado and pillar laid over including cement screed (1:6) and jointed including rubbing and polishing complete all as specified and directed.
S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.
S & F magnetic catcher catcher with nut and screw of mild steel bright finish complete all as specified and directed.
S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.
S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.
S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.
M&L for 30mm width of flap MS piano hinges complete all as specified and directed.
S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed
S&F Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.
S&F in repair Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames, complete all as specified and directed.
M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required, complete all as specified and directed.
S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required, complete all as specified and directed.
S & F utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 250 mm approved Make complete all as specified and directed (fancy type)
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling & waste pipe, complete all as specified and directed.
S & F Corner Glass Shelf 300 mm (with ABS brackets) of size (300x300)mm complete all as specified and as directed. (fancy type)
S&F in repair soap Dish vitreous china Approx size 160x 160x90mm complete all as specified and directed
Removing all existing old treatment over RCC roof or Taking down cement plaster including racking out joints, hacking for key, scrubing down with water complete all as specified and directed.
Brushing net cement slurry @ 3 Kg / Sqm on roof slab, complete all as specified and directed.
M & L 15mm thick plaster fair finished using cement mortar (1:4) with WPC on roof slab, complete all as specified and directed.
M & L oil based bitumen primer @ 0.3 L/Sqm on plaster surface, complete all as specified and directed.
M & L APP membrane 3mm th min wt 3kg/Sqm for water prooping of roof sealing with 100mm over lap, complete all as specified and directed.
M & L 2coats of alumunium paint over bituminous surface of membrane, complete all as specified and directed.
S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.
S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.
S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.
M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.
Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.
M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.
M&L PVC (SWR) bend any radius 110mm dia, complete all as specified and directed.
M&L PVC (SWR) bend any radius 75mm dia, complete all as specified and directed.
M&L PVC(SWR) Tee any radius 110mm dia, complete all as specified and directed.
S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified and directed.
S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified and directed.
S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long, complete all as specified and directed
S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.
S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290, complete all as specified and directed.
M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth, complete all as specified and directed.
M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces, complete all as specified and directed.
M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth, complete all as specified and directed.
M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.
S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board, complete all as specified and directed.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed (fancy type)
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed
Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrosion protection and heat reflective corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrosion protection and heat reflective plain sheet steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and directed.
Brick work with Sub-Class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in (1:4) CM, complete all as specified and directed.
M&L Cement concrete, Type D-2 (1:4:8) (40mm graded aggreated in foundations, filling and mass concrete, complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floors below or above ground level including surfaces to be finished even and smooth without using extra cement complete all as specified and directed
S&F Non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screedbed in CM (1:6) complete all as specified and direccted
M&L for 20mm thick table rubbed and polished granite (of any type) work as in steps, jambs,pillars, windows cills, cooking platform etc jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM (1:6) complete all as specified and directed
M & L for rounding to edges of granite or stone slabs one edge, such as in cooking platform, and other similar situations, complete all as specified and directed.
S&F in repair vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including connection to trap and to flush pipe, anti-syphonage etc, complete all as specified and directed.
Supply and fix in repair wash basins, Vitreous China 580x450mm including cutting for and pinning in ends of brackets or erecting stand, waste coupling/ fitting 32mm bore dia of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) etcincluding 15mm pillar tap cast copper alloy fency type 450mm long PVC connection, etc complete all as specified and directed
M&L for Preparing surfaces plastered on new surface of wall and applying two coats of cement base paint complete all as specified and directed
M&L for applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces, preparatory to distempering including preparation of newly or untreated plastered surface complete all as specified and directed.
Complete removal of existing treatment and preparing the surface of walls of any height of bldigs with 3mm thick Birla putty/JK Wall putty and applying two coat of oil bound distemper by mechanical equipment or complete all as specified and directed.
M&L for complete removal of existing treatment on wall of any height of bldigs by brooming down with wire brushing, stoping and applying two coats of exterior weather coat/ plastic emulsion under one coat of primer by mechanical applicator, complete all as specified and directed. (Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE)
M&L for preparation of old surfaces and applying one coat of white wash on wall surfaces including cornices etc complete all as specified and directed
M&L for preparation of old ceiling surfaces and applying one coat of white wash complete all as specified and directed
Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 each complete all as specified and directed
M&L for powder coated alumunium chowkhat of size 101.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed.
S & F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed
S & F 150mm long Aluminium handle cast type anodised complete all as specified and directed
Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.
Taking down carefully copper/aluminium casing caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs, Isolators etc and making good to disturbed surface complete all as specified and directed.
M&L fixing PVC Casing caping 20/25 mm on wall/ceiling, including replacement of old u/s PVC cashing caping, for exesting old servicable point wiring for existing old servicable point wiring of 1.5mm/2.5mm/4mm & 6 sqmm, Existing wiring/ Submain wiring drawn through new PVC Casing caping/conduit on wall/ceiling, including replacement complete all as specified and directed. (Note : The rate quoted is deemed to be included for taking down of U/S PVC Casing caping/ conduit including cutting & fixing charges & making good to disturbed surface and matching with existing surfaces.
Supply and fix in replacement Blanking Plates for covering of MCB DB open space complete all as specified and directed
Supply and Fix modular switch one way 6 Amp 240 volts one module complete all as specified and directed
Supply and Fix modular switch two way 6 Amp 240 volts one module complete all as specified and directed
Supply and Fix modular bell push switch one way 5 Amp 240 volts one module complete all as specified and directed
Supply and Fix modular switch one way 16 Amp 240 volts one module complete all as specified and directed
Supply and Fix socket modular one way 6 amp 240 volts two module complete all as specified and directed
Supply and Fix socket modular one way 16 amp 240 volts two module complete all as specified and directed
S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed
S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.
Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed
Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed
Supply & Fix regulator modular step type one way 220 volt two module complete all as specified and directed
M&L for lamp holder, PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed
M&L for submain complete with 2x6 sqmm, single core, multi stranded copper conductor, PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 6 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)
S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of MCB SP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed.
S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed
S&F in replacement of LED tube light fitting 18 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed
M/s Mukesh and company
Ashis Enterprises
M/S KAMLESHWAR SINGH
Delhi Enterprises
M/S SHAMBHU SHARAN SINGH
M/S GYANITECH ENTERPRISES
M/S SAI UDYOG
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .