WELCOME MAINTENANCE, DAY TO DAY MAINT COMPLAINTS AND CERTAIN BR REPAIRS IN ADITI AHILYA RIVIERA COMPLEX AND CERTAIN OTHER LOCATIONS UNDER AGE BR-II OF GE NW NOFRA

Amount

Note : 1. The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (16th floor building) & including provision of necessary scaffolding & safety measures. (a) Uniform for all deployed staff in duty supervisor as approved by GE. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Debris / site clearance immediately before leaving site. (e) Safety eqpt to be carried all time. (f) Scaffolding wherever reqd deemed to be included in quoted rates. (g) Welcome of 1 qtr will not take more than 03 days. (h) Contractor is solely responsible for any defect or after working situation arises, take leaving fresh water tap open or throwing of debris through window or shaft, Penalty levied as mentioned above. (j) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (k) In case of 3 warning to contractor, it will be reflected in WLR for slow progress. (l) After painting cleaning of all floors, glass and Fixurniture by own arrengement.

(i) Water charges will be applicabel as specified in CA. (ii) For electricity temporary meter to be installed by contractor for every quarter and electricity charge at allied as specified in CA.

(i) Complaint registered upto 11:00AM & emergency complaint to be attended same day. (ii) Complaint Team consist of 02 Carpenters, 01 Plumber, 01 Mason alongwith reqd helpers.

Supervisor will collect key form Cell. Deploy atleast 2 teams each consist of 3 painter, 01 carpenter, 01 Plumber, 01 Electrician and after completion of welcome maint of qtr fill the format as specified in CA and submit to complaint cell. In case less no of qtr available permission should be taken from AGE to reduce strength. Format attached as Appx 'G' for welcome maint to be filled by contractor on completion of welcome maint to be submitted in complaint cell. (Note:- Work done shall be measured and Paid in respective items of BOQ).

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of and apply two coat oil emulsion distemper over a coat of primer over a coat 1 to 2 mm thick wall care putty, complete all as specified.

M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling .

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as speciified.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint & ht. upto 16th floor of bldg., complete all as specified.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description n exc 1 sq.m each

S&F 2nd class hard wood (sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side, complete all as specified.

S&F 35mm thick 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated.

S&F 2nd class hard wood 35 mm thick, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick stile consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.

S&F in repairs 12 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts with stainless steel screws complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed with stainless steel screws complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed with stainless steel screws complete all as specified and directed..

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked fixed with stainless steel screws complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, cast type anodised, ISI marked fixed with stainless steel screws complete all as specified and directed.

S&F butt hinges 100 mm stainless steel hinges medium weight and fixed with stainless steel screws complete all as specified and directed.

S&F butt hinges 75 mm mild steel hinges medium weight and fixed with stainless steel screws complete all as specified and directed.

M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed with stainless steel screws complete all as specified and directed.

S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified. ( Work carried out upto 16th floor of building either from inside or from outside)

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed. ( Work carried out upto 16th floor of building either from inside or from outside)

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.( Work carried out upto 16th floor of building either from inside or from outside)

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and refixing in the same opening after easing & adjusting all as specified.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing & adjusting all as specified.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each

Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each

S&F as in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F as in repairs aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F as in repairs aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F as in repairs 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified.

S&F as in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F 4 levers night latch with 3 keys complete all as specified and directed.

S&F in repairs gate and shutter hooks and eyes 150 mm size of aluminium plate type II all as specified.

S&F in repairs 40 mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished.

S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with / including fixing brackets, Knobs rollers etc.all as specified.

S&F in repairs 20 mm dia harrison rails anodised aluminium alloy incl brackets, stops and rollers etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4 , complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

M&L for machine cut cudappah stone slab 20-25 mm thick laid over screed base in cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water & ht. upto 16th floor of bldg., complete all as specified.

M&L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, surfaces to be finished even and smooth without using extra cement & ht. upto 16th floor of bldg., complete all as specified. (Plaster work carried out in patch work)

M&L for plastering 10mm thick in CM 1:4 in ceiling finishing even and smooth without using extra cement. (Plaster work carried out in patch work).

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions & ht. upto 16th floor of bldg., complete all as specified.(Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1 to 2 mm thick wall care putty all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.( Work carried out upto 16th floor of building either from inside or from outside).

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers , clips & ht. upto 16th floor of bldg.,including taking down existing GI water tubing complete with all fittings of 15 mm bore, complete all as specified. ( Rates includind of scaffolding upto 16th floor).

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers , clips & ht. upto 16th floor of bldg.,including taking down existing GI water tubing complete with all fittings of 20 mm bore, complete all as specified. ( Rates includind of scaffolding upto 16th floor).

Taking down & Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. ( Rates incl of scaffolding upto 16th floor)

Taking down & Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. ( Rates incl of scaffolding upto 16th floor).

S&F 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings fixed of required sizes including with all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size (in high rise building (upto 16th floor)including scaffolding) and incl. taking down old tubes of any desc. complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 16th floor of bldg., complete all as specified.

S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified.

S&F PVC (SWR) bends of 160 mm bore & ht. upto 16th floor of bldg., complete all as specified.

M&L for repairing and cleaning of PRV including replacement of nut, bolt,washer , rubber gasket adjustable bolt etc and refixing the same PRV in same position of 25 or 32 mm dia size. ( Rates incl of scaffolding upto 16th floor).

Dismantling of cast iron or reinforced concrete pipes upto 100 mm (internal dia of pipe) jointed in cement mortar and taking out of trenches if required & ht. upto 16th floor of bldg., complete all as specified.

S&F sand cast type 100 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg., complete all as specified.

S&F sand cast type 75 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg., complete all as specified.

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified.

S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified.

S&F 75mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified.

S&F 100mm bore of pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified.

S&F as in repairs cast iron 'P' trap 100mm dia.

S&F in repairs cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 all as specified and directed.

S&F 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm length all as specified and directed.

S&F in repairs vitreous china wash down water closet pan white (P or S trap type) including plastic sheet cover with nuts and bolts etc all as specified and directed.

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair.

S&F 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.

S&F in repairs PVC bathroom cabinet with 4mm thick looking mirror of overall size 450mm x 300mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and as directed.

S&F in repairs plate rack made of stainless steel, 600 x 750X 255 mm (0.55mm thick ss sheet) including fixing as per manufacturers instruction.

S&F in repairs CP bib cock 15 mm bore complete all as specified and directed.

S&F in repairs fancy type CP Pillar taps 15 mm bore all as specified and directed.

S&F in repairs CP angular stop cock / angle valve 15 mm bore all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel and fixed with suitable screws on wall/tiles, Complete all as specified and directed.

S&F in repairs fancy type two way CP WHB mixer (Hot and cold) 15 mm bore all as specified and directed.

S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed.

S&F as in repairs flush pipe of PVC 32 mm dia for low level cistern.

S&F in repairs SS grating 100 mm dia all as spoecified

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe all as specified and directed.

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges

Cleaning of loft tank of upto 300 ltrs capacity (in existing position or disconnecting existing tanks for cleaing and refix in same position incl fixing of all attached fittings) by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning ,complete all as specified and directed.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.

S&F rotational moulded polyethylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.

Repairing of minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, and the like door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/mails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified.

Repairing of minor complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified.

Attending the complaints of air lock of GI pipes during supply hours (In early morning @ 6.00AM) & by taking down GI pipes and /or by using pressure pump in pipe where air lock occurred & resolve the complaint . After refix the GI pipe in the same location, complete all as specified. ( for internal or external airlock in any diameter of pipe) .

M&L for taking down MS grills n.exc 1.5sqm in each grill and refixing in same location , complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for , Complete all as specified.

M & L for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; tank supports, framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

M& L for taking down existing aluminium sliding window from aluminium frame carefully & refixing in the same position after replacing bearing wheels fixed at botom of shutter (02 Nos. in each shutter 1st quality) including all fittings , screws, etc and fixing new aluminium section if required complete all as directed. (New aluminium section shall be paid in respective item)

S&F as in repairs aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

Supply and fixing in repair decorative glass corner shelf round 8mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern complete all as specified and directed.

Supply and fixing as in repairs brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs wall mixer fancy type chromium plated suitable for connected plumbing work and complete all as specified and directed by Engineer-in-charge.

S&F Stainless Steel Soap Dish fancy type fixed with two Steel/ CP Screws complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic double locked casing ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

(a) One light point controlled by one switch one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(e) One 3 pin socket outlet 15 Amps on same board with other switches.

M & L for wiring for 15 Amp Socket with 2.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic double locked casing ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

Supply and fix Modular Switch, 6Amp, One way, 1 module.

S&F Modular Switch , 16Amp, One way, 1 module, ISI marked complete all as specified and directed.

Supply and fix Modular bell push, 6Amp, One way, 1 module.

Supply and fix support function blank plate single, 1 module complete all as specified and directed.

Supply and fix Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed .

Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module.

Supply and fix Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 4 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 6 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 8 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 12 Module complete all as specified and directed.

Supply and fix Modular metal flush box 2 module including cutting and chassing complete all as specified and directed.

Supply and fix Modular metal flush box 3 module including cutting and chassing complete all as specified and directed.

Supply and fix Modular metal flush box 4 module including cutting and chassing complete all as specified and directed.

Supply and fix Modular metal flush box 6 module including cutting and chassing complete all as specified and directed.

Supply and fix Modular metal flush box 8 module complete all as specified and directed.

Supply and fix Modular metal flush box 12 module including cutting and chassing complete all as specified and directed.

Supply and fix Polymer extruded channel, with opaque diffuser for glare free light 1x20 WH 04 feet long accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size with all accessories complete all as specified and directed.

Supply and fix Polymer extruded channel, with opaque diffuser for glare free light 1x10 WH 02 feet long accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size with all accessories complete all as specified and directed.

Supply and fix Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC Casing caping of suitable dia, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing & caping.

Supply and fix sheet metal enclosure 8 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

MCB SPN 63 Amps, 240 Volts - 01 No.

MCB SP 6-32 Amps, 240 Volts - 10 Nos.

Material and labour for cleaning all ldust filling cavities with filler, prepartation of surfaces, painting of ceiling fans and Exhaust fan in situ with one coat of synthetic enamel paint by spray painting complete all as specified and directed.

S&F in repair Switch 5 Amps piano type, single pole 230 Volts complete all as specified and directed.

S&F in repair switch socket combination multipurpose for 3/2 pin 5 Amps flush type ISI marked complete all as specified and directed.

S&F in repair switch socket combination multipurpose 2 in 1 for 3 pin 15 Amps & 3pin 5 Amp controlled by one switch flush type complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type 450 Watts, complete ISI marked all as specified and directed.

S&F in repair bell push flush type 5 Amp complete ISI marked all as specified and directed.

Supply and fixing in repair Capacitor 2.5Mfd complete all as specified and directed.

Supply and fix in repair Bell electric AC 230Volt single pole musical type with ISI mark complete all as specified and directed.

Supply and fix in repair PVC Box for Switches, with fixing accessories complete of the following sizes :-

size 4”x4”

size 4” x 7”

size 6” x 8”

size 10” x 8”

Supply and fix in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply complete all as specified and directed.

S & F in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge.

S&F in replacement of heating element as required at site of 2.0 /03 KW ISI marked as required at site and approved by Engr-in charge.

S&F in replacement thermostate switch for geyser of any type ISI marked complete all as specified and directed by engineer in charge.

S&F in replacement thermmal cut out for geyser of any type ISI marked complete all as specified and directed by engineer in charge.

Supply and fix in replacement hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified.

Supply and fix in replacement Cold water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified.

S&F in replacement of top plug 15 Amp 3 pin complete all as specified and directed by engineer in charge.

S&F in replacement indicating lamp green/red in colour for geyser 230 volts complete all as specified and directed by engineer in charge.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 250 x 200 x 3 mm all as specified and as directed by Engineer-in charge.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 175 x 100 x 3 mm all as specified and as directed by Engineer-in charge.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm all as specified and as directed by Engineer-in charge.

S&F in replacement flexible wire 2 core copper size 23/0.0076 sqmm complete all as specified and directed by Engineer-in charge.

S&F in replacement PVC non-metallic double locked casing caping ISI marked upto 25 mm with accessories fixed in wall/ceiling/truss including cutting chases as per site requirement complete all as specified and directed by Engr in Charge.

Supply and fix single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge.

Supply and fix single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 Sqmm in existing PVC casing caping/ new as per site requirement complete all as specified and directed by Engr in Charge.

Refixing of existing PVC casing caping with suitable size of screws and making the disturbed surface good complete all as specified and directed by Engineer in charge.

satguruenterprises

Advait Enterprises

K.C.P ENTERPRISES

Rama Construction Co

SN CONSTRUCTION

SRI SAIRAM COUNSTRUCTION

Shivam Enterprises