Renovation of Toilet Blocks in Flower Market 8Nos and Food Grain Market 26Nos KWMC

Amount

Dismantling and Clearing away the existing Floor and wall, conveying and dumping the debris Stacking etc., all complete as directed by departmental officers.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Removing the existing ventilators,doors and windows including removal of frames, hinges and fastenings carefully and stacking the same at site etc., complete.

Toilet (Gents & Ladies)

Supplying and Laying the floor with antiskid ceramic tiles of approved quality, colour and design joint free of size 305x305x6 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three M-sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.

Toilet (Gents & Ladies)

Dadooing Ceramic Tile 300mm x 450mm x8mm best approved quality and colour in all shade of the glazed tiles in all floor over a base layer in Cement Mortar 1:2 (1 of Cement and 2 of Sand)10mm thick and laid in situ true alignment and pointed neatly with colour cement suit the colour of the tiles fixed in position without any air gap in the tiles neatly etc., complete complying with standard specification and as directed by the the departmental officers. The Colour & quality of tiles should be got approved by the Executive Engineer before use in work.

Plastering with C.M 1:5 (1 of Cement and 5 of M-Sand) 12mm thick with fine river sand for plastering including scaffolding charges ,curing, neat finishing, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Fixing in position PVC Screw Down Tap Heavy Type 15mm dia (Heavy Type) of approved make conforming to IS specification and quality including cost of shellac, thread, cutting and threading wherever necessary etc.,all complete complying with standard specification and as directed by the departmental officers.( Taps should be got approved by the Executive Engineer before use on the works)

Supplying and Fixing in position best quality approved make white glazed earthernware Hand Wash Basin of size 550 x 400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated piller tap, 32mm dia metre G.M Wheel Valve, 15mm dia brass nipple 15mm dia nylon connection etc., including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specification. The quality and colour of wash hand basin and specials should be got approved by the Executive Engineer before use on work

Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping,clean removal of dirt. The rate includes cost of brushes,sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer(the colour and quality should be got approved by the Executive Engineer before use)

Supplying and painting the Ceiling with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work)

Painting the Old Iron Work two Coat with synthetic enamel paint of approved quality and colour including ordinaryscraping using brushes and neat finishing,etc., Complete Complying with standard specification and as directed by the Dept.Officers

ABS DOOR / EQUIVALENT Specification:Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work

FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of (‘U’ channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of (‘U’ GI channel of size 46 x 22 x 0.6mm), bottom tie rod of (‘U’ GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work

Supplying and fixing in position of Indian make white glazed earthen ware lipped mouth flat back urinal of best approved quality with GI connection of suitable length 32mm bell mouth PVC connection 15mm dia GM wheel wall fixing the urinal in the wall position with necessary TW plug, clamps, screws, shellac etc., including the dismantling the masonry if necessary and redoing the same to its original condition fixing the 15mm dia GI pipe and wheel wall painting the pipe two coats of approved colour of synthetic enamel paint over one coat of primer and etc., and checked without leakage etc complete complying with standard specifications and as directed by Departmental Officers.

Supplying and Fixing in Position first and approved variety of various dia U.P.V.C Ball valves (Heavy type) with I.S.I Mark of the Following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standatd specifications for both internal & External water supply arrangements.

40 mm dia Ball valve

Construction of inspection chamber of folloing size with necessary earth work excavation 40mm size brick jelly concrete inC.M.1:4:10(1 cement,4 Crushed Stone Sand(Commercially called M-Sand) and 10 broken brick jelly) stock brick work in C.M.1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cm thick wall, benching, channelling and plastering, interior, exterior and top with C.M.1:3 (1 cement and 3 Crushed Stone Sand(Commercially called M-Sand)),12mm thick and providing 7.5cm thick RCC loose slab covering in CC 1:2:4 (1cement and 2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granite borken stone jelly of 12mm to 20mm size) with necessary reinforcement

Cleaning the existing toilet wall using acid wash etc including cost of material and labour charcges etc., complete.

Conveyance of Earth/Debris to a lead of within 30 km from site as directed by the Engineer inculding loading, unloading, hire charges for vehicle and other incidental charges etc., all complete as directed by the Departmental Officers.

Supplying,laying and jointing CPVC Pipes of approved quality and best variety conforming to ISS with ISI mark, of the following Sizes above Ground level upto 4M height laid properly to alignment including cutting, threading and fixing the required CPVC specials but excluding the cost of such specials and fixing to the wall with necessary TW Plugs, Clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.

32mm dia pipe

25mm dia pipe

20mm dia pipe

Electrical Work

Supplying and Fixing of 20W 4 Feet LED Fitting with Complete with Copper choke and condensor with Around blocks on wall or ceiling with flutube with PVC unsheated FRLS copper leads from terminals to the fitting

Supply and fixing of 300mm (12'') Sweep (Heavy duty) AC Exhaust fan Complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sq.mm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.

SRM ENTERPRISES (BID ID -1386606)