WORK OF FILLING OF SAND IN SAND PITS , PAINTING AND WRITING ON FIRE STANDS , FIRE BUCKETS , REPAIRING OF FIRE STAND AND HUTS , REPAIRING OF OPERATING MECHANISM BOXES OF 132 KV ISOLATORS , REPAIRING AND ADJUSTMENT OF 33 KV ISOLATOR ARMS , EXTRACTION

Amount

Scratching of old painted surface & painting of complete fire bucket stand along with Red Oxide primer in one coat and then red colour in two coats after 12 Hrs. interval and writing of following in English and Hindi on the both end circular plates. In English : FIRE Mobile No. 9454418790, 2333333, 101 In Hindi : vkx Mobile No. 9454418790, 2333333, 101

Painting of sand buckets with one coat of red oxide primer and two coats of standard make red colour synthetic enamel paint outside and white colour inside after taking out filled through cleaning to remove rust, dust etc. and writing vkx and "FIRE" on them after painting work again filling of sand.

Refilling of sand in existing sand pits and sand barriers in the switchyard of cable trenches to compensate sand level after removing of cover & placing cover originaly after work with all cost of men, materials, misc. consumables and T&P required for the job.

Repairing of fire huts of size 3000x2400x2000 mm installed in switchyard of 132KV S/S FCI, Gorakhpur as per details given below :-

Fixing and fitting of asbestos corrugated (A.C.) roofing sheets of size 3'x4' to cover the roof of open hut type G.I./M.S. Angle frame structure of size 3000x2400x2000 mm with "J" hook bolt, nut and washer etc. along with slanting hut.

Repairing of fire hut floor with first class brick ballast, cement & sand mixture in the ratio of 1:4:8 and finally 12 mm thick plastering with cement & sand mixture in the ratio of 1:4.

Painting of angle post & frame structures with post office red colour synthetic enamel paint of 1st quality in 2 coats after applying 1 coat of red oxide primer and finally writing ''vkx** and "FIRE" on M.S. Sheet Boards for all 3 fire huts in the switchyard.

Repairing of top cover of fire bucket stand by replacing damaged sheet with new BP shet of suitable gauge & size with all cost of men, T&P, BP sheet etc. for completion of work.

Extraction of various sizes PVC copper control cable (2/4/6/10 Cx2.5 mm2 ) from various sizes trenches after de-clamping from racks and its shifting upto new constructed bays cubicles, control / relay panels / bay MB as per site requirement with all cost of men, T&P, consumables etc. required for work.

Repairing of damaged GI pipe between operating box of 132KV 1250 Amp. Isolator to base channel of isolator rotary pot by means of welding process and also work covers replacement of rusted nuts, bolts and washers etc. with all cost of men, T&P, welding machine etc.

Laying and termination of 132KV bus voltage metering & protection cores to 63 MVA T/F-I, II relay and control panels from 40 MVA T/F control & relay panels for proper metering of HV side and Directional E/F protection with all cost of glands, ferrules etc. for completion of work.

Setting right 33KV isolator arm of 33KV isolators of 33KV side of 63 MVA T/F-I, 40 MVA T/F, Pipraich, Paniyara, Bhathat, Medical etc. feeders by way of oiling, greasing, adjustment of operating mechanism & pipe assembly etc. with all cost of men, consumables etc. required for work.

Harshit Enterprises

Vasu Associates