Loading
Loading…
Loading…
Tender Value
₹26.2 Cr
EMD Value
₹52.4 L
Closing Date
5 May 2026, 3:00 pmClosed
Yes (up to 2 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
GSU/ENGG
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Please follow GCC-April-2022 for Annexure-VIB. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [NOTE: Failing of submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet shall be liable for rejection.] [NOTE: Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated] through TRACES of Income Tax Department of India.]
Similar nature of the work for the tender -"Any Civil Engineering work involving execution of fabrication & erection of structural steel works".
24 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
GST has been considered during assessment of this instant tender.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE- I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e-tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
A. Para 5(3) ii. Part I of GCC shall be read as under : ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids. (Advance Correction SlipNo.2 vide Executive Director, Civil Engineering(G),Railway Board No.2022/CE-I/CT/GCC 2022/Policy dated13.12.2022)
The participating Bidder must submit self certificate[Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender.[Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023].
Sealdah Division - KPAW - Provision of low shed, renovation of service buildings at Rolling Stock Tesing Line, Renovation of various diplorable service buildings at KPAW alongwith HD flooring at S/9, 9A, 10, 11, 11A & 14, Provision of deep pit, construction of service building, replacement of existing damaged roof sheets at Rolling stock testing line etc. under Dy. CPM/ENGG/SDAH
DCPM-GS-ENG-SDAH-02-26-27
DCPM-GS-ENG-SDAH-02-26-27
Open
Works - General
18 Months
Kolkata, West Bengal
₹0
₹52.4 L
5 May 2026
10 Apr 2026
21 Apr 2026
505 items across 13 schedules · ₹29,46,81,458.51 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supplying & driving hard wood pile 5m to 7m long without joint of 125mm average dia. for protection of bank slope if required. The rate includes supplying and erecting derric and monkies for driving pile in any type of soil. The rate includes costs of all tools and plants and material, labour, lead, lift and two coats of coal tar paint complete in all respect. | Metre | 800.00 | 320.99 | 2,56,792 |
| 2 | Supply of unskilled labour, etc. to work with Railway Officials during any period of the day as per instruction of the Engineer-at-Site. Irrespective of actual working hours, the labour should be available up to a minimum of 8 hours or part there of as per requirement in a day. No extra payment will be made for idle hours if any | Man- Days | 1095.00 | 733.93 | 8,03,653.35 |
| 3 | Supply, fitting and fixing UPVC pipes of 160mm dia. (OD) Type-B of approved brand and quality as per IS:13592-1992 with necessary clip, nail, sealing ring/socket and bend clip, solvent cement jointing compound, etc.as per approved drawing and Manufacturer's specification complete in all respect | Metre | 1280.00 | 894.78 | 11,45,318.4 |
| 4 | Supply, fitting and fixing UPVC bends of 160mm dia. (OD) with requiured degree with access door UPVC fittings of approved brand and quality as per IS:14735-99 including supply of rubber ring, jointing lubricant, i.e. solvent cement or other solvent or other consumables as recomended by manufacturers complete in all respect | Each | 208.00 | 496.47 | 1,03,265.76 |
| 5 | Supplying, manufacturing and fixing in position with all reveting/bolting as required bell mouth piece made from plain alluminium sheet of 2.00 mm thickness for conecting rain water pipes with gutter as per direction of site Engineer with Contractir's labour, materials, tools & plants, etc. complete in all respect. | Each | 122.00 | 1,003.61 | 1,22,440.42 |
| 6 | Supplying, fitting, fixing and erecting 3mm thick Transparent Polycarbonate sheet as per IS-14443-1997 of approved colour of GE-LEXAN/VMI Plastic "SUNLITE" or equivalent in Roof, Side, Gables, Walls, End Louvers, etc. including cutting of sheets for proper lapping and length as per approved drawing, supply of necessary bolts with nuts and washers with standard bituminous washers, etc. as required complete in all respect to make the entire roofing watertight and leak proof. (No extra payment will be made for over lapping and payment will be made for clear area only.) | Sqm | 1910.00 | 4,019.98 | 76,78,161.8 |
| 7 | Supplying, transporting to site, laying, jointing R.C.C Hume Pipe as per IS - 458 of following dia of NP-4/NP-3 quality including collar wherever necessary as per approved design and drawing maintaining proper slope including excavation of earth as per required depth and shoring if required complete in all respect. The rate is inclusive of cutting of Hume pipe as necessary with all labour and materials complete and making connection to there sump with proper grouting the junction with cement mortar [1:2] complete in all respects with contractor's all labours, materials, T&P, handling a n d rehandling of materials, crossing of any number of track with all lead, lift, etc. a] NP - 4/NP-3 of 500mm dia. | Metre | 470.00 | 5,243.71 | 24,64,543.7 |
| 8 | Making leveling course with water intensive epoxy resin mortar of 10-20 mm thick under bearing area of required size (300 mm x 125mm) with necessary preparation of bore and fixing the pad with all contractors' labour, material, tools and plants to complete the work in all respect | Each | 930.00 | 339.42 | 3,15,660.6 |
| 9 | Making of Epoxy pad under over concrete base of different sizes as per site requirement. This item includes materials and labour cost. | cum | 1.75 | 54,952.1 | 96,166.18 |
| 10 | Grouting of MCI insert by epoxy resin hardener HY-840 araldite GI-257 and silica powder (1:2:7) ( 1-hardener, 2- resin, 7-silica powder) or smilar compound, all to be mixed by weight including drilling the hole of size 75mmx125mm with blow lamp before filling epoxy mortar with all labour, tools and plants and other accessaries as required keeping MCI insert with proper plumb level, alignment, etc. as per direction of Engineer-at-Site. MCI insert shall be supplied by Railway free of cost. | Each | 930.00 | 197.69 | 1,83,851.7 |
| 11 | Supply of 60kg MCI Insert | Each | 930.00 | 45.37 | 42,194.1 |
| 12 | Cutting hole on CC/RCC minimum size 80/80/100 mm. Depth to fix MCI inserts | Each | 930.00 | 118.6 | 1,10,298 |
| 13 | Supply, preparation & finishing 3 mm thick flow applied Epoxy resin based floor topping Nitoflor SL 4000 of FOSROC make or Shali Floor SLTC-2E of STPL make over 2 mm High strength self smoothing Epoxy underlay Nitoflor EU5 of FOSROC make or Shali Floor SLUL-3ES of STPL make with the following operation; a) Surface preparation; - Surface shall be prepared by mile scarification to get Mechanical key effect to the primer and the concrete surface for ensuring maximum bonding. strong degrease shall be used to remove the oil deposit on the concrete. Dust and loose particles shall be cleaned using vacuum cleaners. b) After surface preparation supply and application of Nitoflor TF 5000 or shali Floor TC-2ARE of STPL make in all the construction joint & pot holes after removing all the existing filler materials from the joints and pot holes and clean properly. Nitoprime 25 or shali Prime 2ESF of STPL make to be applied in the joints and pot holes before the application of Nitoflr TF 5000 or shali Floor TC-2ARE. c) Priming:- Applying of primer Nitoprime 25M or Shali Prime 2ESF after mixing the base and hardener mechanically using a slow speed heavy duty drilling machine (400 to 500 rpm ) fitted with suitable paddle to achieve homogeneous mix and applied on prepared surface, d) Base layer ;-supply and application of Nitoflo EU5 or Shali Floor SLUL-3ES, a high strength self- smoothing Epoxy underlay is applying as the base layer, after mixing the base hardener and filler components thoroughly and poured onto the primed surface and spread evenly to maintain the required thickness @ 2 mm using a serrated trowel followed by that spike roller shall be rolled over the levelled underlay to remove any entrapped air and allowed to cure for a day e); Application of Nitoflor SL 4000 or Shali Floor SLTC-2E:- supply and application of Nitoflor SL 4000 or Shali Floor SLTC-2E over the prepared surface after mixing mechanically the two components using heavy duty drilling machine until achieving a homogeneous mix, and spread on the prepared area using serrated trowel for a thickness of 3 mm spike roller shall be rolled over to remove the entrapped air. | Sqm | 3150.00 | 1,724.53 | 54,32,269.5 |
| 14 | Supplying, erecting and fixing in position ridges, gutters, apron pieces made of aluminum plain sheet and proper housing with corrugated sheet roofing, with all fastenings as per approved drawing weith necessary lapping or as directed by Engineer-at-Site with Contractor's labour, all materials, tools & plants, etc. complete in all respects, For 2 mm Thick aluminum sheet | Sqm | 2160.00 | 2,674.54 | 57,77,006.4 |
| 15 | Supplying and fixing bitumen drum sheet walling to wooden piles with nailling as directed by the Engineer-at-Site in guarding of slipage of earth. The rates includes supply of all necessary materials and fittings like nails to hold in proper Position. All labour, equipments, all lead, lift, ascent, descent, crossing of roads, nullah, fencing, etc. complete in all respect. | Sqm | 90.00 | 471.85 | 42,466.5 |
| 16 | Laying 15mm thick hardened toping on concrete surface with 1 part metallic floor hardener, 4 parts cement and 9 parts by weight hard stone chips of size 6mm mixed and laid as per specification | Sqm | 11250.00 | 350.62 | 39,44,475 |
| Schedule total | ₹2,85,18,563.41 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-B-LOC.pdf
ATTACHMENT
Documentsverificationcertificate_1.pdf
ATTACHMENT
checklist.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Annexure-V_VA11.pdf
ATTACHMENT
commlcompliance.pdf
ATTACHMENT
GCCCSP10.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
technicalcompliance.pdf
ATTACHMENT
GCCCSP7.pdf
ATTACHMENT
GCCCSP8.pdf
ATTACHMENT
E-Tender-TD-Ch-IIIword-2022.pdf
ATTACHMENT
GCCCSP2.pdf
ATTACHMENT
GCCCSP3.pdf
ATTACHMENT
AnnxVIBcontractualdata.pdf
ATTACHMENT
BidSecurityVIA.pdf
ATTACHMENT
GCCCSP5.pdf
ATTACHMENT
checklist.pdf
ATTACHMENT
GCCCSP9.pdf
ATTACHMENT
GCCCSP1.pdf
ATTACHMENT
JointVentureMOU.pdf
ATTACHMENT
Annexure-B-LOC.pdf
ATTACHMENT
GCCCSP4.pdf
ATTACHMENT
GCCCSP6.pdf
ATTACHMENT
ANNEXURE-C-LOC2.pdf
ATTACHMENT
IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-31.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .