Loading
Loading…
Loading…
Tender Value
₹3.3 L
EMD Value
₹9,884
Closing Date
3 Jun 2026, 5:30 pmClosed
Director, CIRB
ICAR - CIRB, Sirsa Road, Hisar
Repair and Renovation of Existing lab into Semen Freezing lab
2026_DARE_909400_1
3/Pur/RSN/263
Open Tender
Civil Works
Works
90 days
ICAR-CIRB, Sub Campus, Nabha
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,884
19 May 2026
19 May 2026
4 Jun 2026
19 May 2026
3 Jun 2026
19 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) | 1.1 | Cum | - | - |
| 1.02 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.6 | Cum | - | - |
| 1.03 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. | 9 | Nos | - | - |
| 1.04 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres. | 5 | Sqm | - | - |
| 1.05 | P/F two iron doors 7' x 4' ( one of iron wiremesh and another one of iron sheet ) including necessery fittings etc. | 80 | Kg | - | - |
| 1.06 | P/F iron wire mesh in iron gate of 7' x 4' including necessery fittings. | 3 | Sqm | - | - |
| 1.07 | P/F heavy duty door closer for iron & aluminium gates including necessery fittings. | 2 | Nos | - | - |
| 1.08 | P/F Zinc alloy (white powder coated) cresent lock for sliding door/ window with all fittings. | 10 | Nos | - | - |
| 1.09 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers for main iron gate and of approved quality with necessary screws etc. complete | 1 | Nos | - | - |
| 1.1 | Providing and fixing aluminium work for doors, windows, sliding doors, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15), including necessery fittings like handles, hinges, chitchats etc. | 130 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_955794.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .