REPAIR/ MAINT TO MES INSTALN WITH REPLACEMENT OF SANITARY FITTINGS, FLOORING,PLASTERING,ROLLING SHUTTERS, JOINERIES AND CERTAIN MISC B/R WORKS AT DMRL, ATC DGUTTA, RCMA (MAT), DSC LINE ATC DGUTTA AND PCDA UNDER AGE B/R -II KANCHANBAGH

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm

Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S&F Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L cement concrete type C0, 1:3:6 (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed

S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.

S&F 30mm thick flush shutters, solid core construction with block board and plywood face panels, commercial type on both sides including preparation of surface and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

Supply & fixing of UPVC windows UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and finish the jambs with CM 1:4 complete all as specified.