PROVN OF DEFI ALMIRAH LARGE STEEL FOR MD OFFR ACCN AT DK-I II PROVN OF CHARPOY DOUBLE BUNK FOR HOSHIYAR ROCHHAPAL CHHELU PIRU AND UMED COY OF RRRC AND ADDN ALTN REMODIFICATION OF CHARPOY NYLON NEWAR INTO CHARPOY HARD TOP AT RRRC UNDER GE C DELHI

Amount

Almirah Large Steel 1/2H x 1/2 S, (a) Overall size as per drawing. (b) Body including shutters & shelves (except back) shall be fabricated from 20 gauge (1.00mm) thick MS plain CRC sheet. Back shall be fabricated from 22 gauge (0.8mm) thick MS plain black sheet. Base shall be made of 20 gauge thick MS plain black sheet. Legs shall be provided with 1mm thick MS sheet channel base ends in rectangular shape irrespective of what is shown on drawing all as directed by Engr –in-Charge. (c) Shutters shall be 03 No side hung using 75mm size MS butt hinges. (d) Locking Device. 3 way locking device standard pattern prevailing in the trade, operated by means of a chromium plated steel handle of approved quality and fitted with cup-board lock 4 lever of brass/SS body with keys in duplicate of Make - Harrison/Godrej. (e) Drawer handle shall be 75mm long of steel chromium plated. (f) Lock shall be brass/SS body 6 leaver of make Godrej/Harrison. (g) Hanging rod shall be 18/20 mm dia steel chromium plated conduit pipe of wall thickness 16 gauge with standard steel chromium plated sockets at each end. (h) Finish. Steel surfaces of Almirah (inside and outside complete) shall be S/E spray painting in approved colour/shade after necessary preparation to surface all as directed by the GE. Colour of almirah will be in two shades (Body and shutters). (j) Rest as per details given on the drawing No FD/E6/MAP/18

Charpoy Double Bunk Steel (TP DRG ATTACHED) : The over all size of charpoy double bunk shall be 1980 X 900 X 1800mm. The vertical member shall be of 50x50 mm MS pipe. 100mm dia 3mm thick FI disc shall be welded at the bottom of each vertical member. The long rails shall be 25x65mm pipe welded to vertical member with the support of 6 mm thick gusset plate of appropriate size. Short rails shall be of 25x65 mm welded to vertical member. 4 Nos stittiner of 25 mm square MS pipe shall be welded to long rails. 01 Nos 25 mm square MS pipe shall be welded between short rail vertically for ladder and 3 Nos 25 mm square MS pipe shall be welded to vertical member for ladder & vertical menber. 02 Nos 25 mm square MS pipe railing both side up to 300mm hight from top of bunk charpoy shall be welded on three sides to vertical member also intermediate stiffners to be welded to railing of same size. All MS pipes shall of 1.6 mm thickness. 12mm thick BWR grade plywood shall be fixed to top and bottom bunk with screw to long and short rail with blinded edges all around. The bunk shall be painted with two coats synthetic enamel paint over a coat of red oxide primer. Open ends of square pipes shall be closed with MS plate of 1mm thick of suitable size. All other dimension and fixing detail shall be as shown on Drg.

Removing of existing unserviceable nylon newar from Charpoy GI Pipe and tightening the frame including replacement of broken GI elbow/checknut and supply and fixing of Plytop 12mm thick commercial confirming to IS : 303-1989 BWR Grade of Make : Kitply/ Archidply/ Duro/ Greenply on repaired frame of charpoy GI with provision of two Nos Centre stiffener of 30x5mm flat iron to support plytop fixing with 75mm nut bolt 12 Nos. As per Drg No FD-220

Rana Construction Co

Shri Gajanand Enterprises

R C Sharma and Co

SMS Enterprises