REPAIR MAINT TO ESSENTIAL ITEMS OF WOODEN FURNITURE RE CANNING OF CHAIRS UNDER GE W AGRA

Amount

BED PLY WOOD TOP (FD-246/247) S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.

Head rest shall be made as per drg

Foot Rest shall be made as per drg.

Long rails shall be made of Ist class hard wood (Teak).

Short rails shall be made of Ist class hard wood (Teak).

Stiffener shall be made of Ist class hard wood (Teak).

MS bracket of flat iron 25x3mm,200mm long fixed with screw.

Ply wood top 12mm thick BWR type as per existing shape and size in One piece.

M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces.

CHAIR DINING FD-16(M)/203/279 S&F in repair following part of chair dining of 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;-

Rear Legs

Front Legs

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Bottom stiffener

Back stiffener

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING FD-20(M)/202/280 S&F in repair following part of chair writing with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.

Rear legs

Front Legs

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Bottom stiffener

Back stiffener

Arm rest

M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY:- FD-17(M)/201/229 S&F in repairs following parts of the chair easy with 1st class hard wood (Teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-

Rear Legs

Front Legs

Side Rails

Front/Back Rails

Back Stiffener

Bottom Stiffener

Arms rest

M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF TEAPOY FD-232/ 278/382 S&F in repair of the following parts of teapoy with Ist class hard wood (Shisam) as per existing shape and size duly planned shown on drawing complete all as specified and directed:-

Long rail

Short rail

Side stiffener

Centre stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

M&L for polishing of teapoy with high lass French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO SIDE BOARD: FD-241 S&F in repair to the following parts of side board as per existing shape and size duly planned complete all as specified and directed.

Bottom

Shelves

Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board in front.

Shutter with knob 40mm size

Back shall be made out of 6mm thick commercial plywood.

Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (Shisam)

M&L for polishing of side board with high class French polish on all exposed surfaces except topand bottom incl after preparation of surfaces complete all as specified and directed.

REPAIR OF TABLE DRESSING GENTS (FD-31 (M)/ 230) Repair of following parts of table dressing Gents as per existing shape and size duly planned and finsihed as shown on drg complete all as specified and directed :-

Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial as per existing shape an size

Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

M & L for polishing of table dressing Gents with high class Fench polish on all exposed surface except to and bottom incl after prepreation of surface complete all as specified and directed

REPAIR OF TABLE DRESSING LADIES (FD-32 (M)/ 251) Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-

Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing.

Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

Removal of old U/S leg of table and fixing new legs of ist class hard wood (Shisam)

Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

M & L for polishing of table dressing ladies with high class Fench polish on all exposed surface except to and bottom incl after prepreation of surface complete all as specified and directed

REPAIR OF TABLE BED SIDE FD-248 /276 S&F in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed.

Shelf

Bottom

Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

First class hard wood (teak) 6mm th beading at front on 18 th pre-laminated particle exposed portion of table bed side

First class hard wood (Shisam) frame with 4 nos of legs duly french polish.

REPAIR OF PEG TABLE (FD-236/266 /277/384) S&F in repair of the following parts of Table Peg with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail

Short rail

Side stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE 900mm X 600mm WITH DRAWER : (FD - 224/ 283) S&F in repair of the following parts of table 900 x 600 with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail

Short Rail

Bottom Side stiffener

Bottom centre stiffener

Drawer with 6mm th commercial ply at bottom only and sides, back shall be 12mm th Ist class hard wood (Shisam) with knob.

Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all round complete all as shown in drg and directed.

M&L for polishing of table 900x600mm with drawer with high class French polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER (FD-231/284) S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (Shisam) as per existing shape & size duly planned as shown on drg complete all as spcd and directed.complete all as specified and directed.

Long Rail

Short Rail

Bottom side stiffener

Bottom Centre stiffener

Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all around the Top including fixing of 8 Nos wooden corners to joining part of rails and legs for each table as directed.

M&L for polishing of table 900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed.

REPAIR TO TABLE CENTRE (FD-235/274) S&F in repair of the following parts of table centre with Ist class wood (Shisam)As per existing shape and size duly planned as shown on drawing completed all as specified and directed;-

Long rail

Short rail

Side stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

SREPAIR TO TABLE DINING 06/08 PERSON (FD-239/269 /273) S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (Shisam) as per existing shape and size duly plannned as shown on drg complete all as specified and directed.

Taking down old U/S top of table dining 06 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

Long rail

Short rail

Stiffener

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

RE-CANNING OF CHAIRS ETC (FD-228, 229, 279, 280, 252, 244) Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

CHAIR DINING JCO/ORs (FD/MAP-II/05) S&F in repair of the following parts of Chair Dining JCO/ORs as per shape and size as existing made out of well seasoned 1st class Hard wood Teak complete all as specified and shown on drawing and as directed .

Front legs

Rear legs

Front rails

Side rails

Back rails

Back rest

Stiffeners

PVC Seat 4mm thick with holes screwed with rails.

New nylon buffers on legs.

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

CHAIR DINING OFFICERS (FD/MAP-II/04) S&F in repair of the following parts of Chair Dining Officers as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed.

New teak wood curved back rest of size 25X45mm.

New teak wood vertical stripsof back rest of size 15X30mm.

New teak wood back rail of back rest of size 25X90mm.

New teak wood front and rear legs of size 35X50mm.

New teak wood stiffner of size 20X25mm.

New teak wood front and side rail of size 25X65mm.

New teak wood stopper of size 75X75X25mm fixed with main frame and legs.

Removable 75mm thick 40 Density foam seat covered with coloured fabric as approved.

New seat bottom of 12mm thick BWR Phenol bonded plywood .

New nylon buffers on legs.

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

SOFA SET FIVE/FOUR SEATER (FD-281/373, FD/MAP-II/02) S&F in repair of the following parts of Sofa set 5/4 seater as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed.

New Seat Rails Right and left of Sofa set (Single Seater)

New Seat Rails Front and Back of Sofa set (Single Seater)

New Rails of back frame Top and bottom of Sofa set (Single Seater)

New Back and bottom support of Sofa set (Single Seater)

New long rails of seat front and back of Sofa set (Three Seater)

New long rails of Back frame Top and bottom of Sofa set (Three Seater)

New long Back and bottom support of Sofa set (Three Seater)

New legs of Sofa Single seater/Three seater

New Arms of Sofa set.

New bearers of Seat and Back rest of Sofa set.

S&F of cushion foam for sofa set size 525x525x100mm, 40 density (Make-Sleepwell/feather foam) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 350/- per RM

Material & Labour for polishing of two coats of french polish internal and external to the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed.

Material & Labour for polishing of two coats of french polish internal and external to the Sofa Set 4 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed.

TABLE BED SIDE (MAP) (FD/E6/MAP/15 (R )) S&F in repair of the following parts of Table Bed side (MAP) as per shape and size as existing made out of Ist class Hard wood Pre laminated particle board teak face and commercial plywood all as specified & as directed.

New top of 18mm prelaminated particle board with PVC edging of size 450X450 mm fixed to steel frame with 25mm projection on three sides.

New Bottom portion of upper and lower drawers of 6 mm BWR Gr commercial plywood.

New Front portion of upper drawers with 18mm prelaminated particle board with PVC edging screwed to 12 mm plywood.

New Front portion of lower drawers with 18mm prelaminated particle board with PVC edging screwed to 12 mm plywood.

New Sides of upper drawers of 12 mm BWR Gr commercial plywood.

New Sides of lower drawers of 12 mm BWR Gr commercial plywood.

New Hard wood runner of 25X20 mm of upper and lower drawers.

New Hard wood stopper of 25X20 mm of upper and lower drawers.

New Frame work made of 18 mm MS square pipe (18 Gauge) powder coated with black colour enamel paint.

New 18mm prelaminated particle board inside the top frame work.

New Handle of upper and lower drawers as per approved sample.

New rubber Shoes for legs as per approved sample.

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

TABLE DRESSING LADIES WITH STOOL (FD/MAP-II/07) S&F in repair of the following parts of Table Dressing Ladies with Stool as per Shape and size as existing made out of well seasoned 1st class teak wood and 18mm thick pre laminated particle board teak face all as specified and shown on drawing and as directed by Engr-in-Charge :-

New looking mirror of size 1230 x 425 mm & 5mm thick

New Frame and back support of the mirror including back side 6 mm thick commercial plywood

New Top of size 380x350/450mm made of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing 4mm thick Teakwood beading on all exposed sides.

New drawers made out of 12 mm thick commercial plywood of make-Bhutan/Novopan/Archid with 18mm thick pre-laminated particle board teak faced front portion providing 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy.

New shutter of doors made of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid providing 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges.

50 mm Lomg 'D' shaped Stainless Steel handle.

Magnetic catcher for shutters.

Side of stool made of 18mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid providing 4mm thick Teakwood beading on all exposed sides.

Openable shutter made out of 12 mm thick commercial plywood fitted with MS folding Handle.

50 mm dia heavy duty revolving nylon wheel of stool.

75 mm thick foam cushion 40 density of make Sleepwell/Curlon/Restwell covered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than Rs.400/- per mtr) colour & pattern as approved .

Material & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

HAT STAND WITH MIRROR (FD-233) Removing of old unsv components of Hat Stand and supply & fixing new Components as per Shape and size as existing all as specified and shown on drawing and as directed :-

New looking mirror of size 300 x 440mm & 5mm thick

New 4 mm thick plywood one side teak face make -Kitply/Greenply/Archid on front of size 1000 x 710 mm

New Aluminium Pegs 100 mm long

New Teak wood edging of size 6 x 35 mm alround the hat stand

Material & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

LOCKER BED SIDE WOODEN FD-54(M)/222 S&F in repair of following parts of locker Bed Side wooden as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.

Removing of existing u/s shutter and S&F new shutter of 18 mm thick teak pre-lamintaed particle board one side teak wood other side white including 4 mm thick TW beading on three side of shutter all as specified and directed.

Removing of u/s back & sides and S&F new 6mm thick BWR plywood as per existing shape and size all as specified and directed.

Removing old u/s bottom and S&F new bottom of 2nd class hard wood all as specified and directed.

Removing old u/s top and S&F new top 18mm thick pre-laminated particle board as per existing shape and size all as specified and directed.

Removing of existing u/s partition wall and S&F new partition wall of 2nd class hard wood all as specified and directed.

Removing of old u/s shelf and S&F new self 15mm thick of 2nd class hard wood all as specified and directed.

Bottom Frame with Legs

Taking out old u/s hasp & staples and S&F new hasp and staples 75 mm long aluminium anodized with required size of screw all as specified and directed.

Removing old u/s handle and S&F new handle ‘D’ type aluminium anodized 100mm long with required size screw all as specified and directed.

Taking down old u/s hinges and S&F new hinges piano type chromium plated ISI marked with required size of screws all as specified and directed.

S&F of MS conduit pipe 1.5mm dia 20 gauge as per size required all as specified and directed.

M&L for polishing of old/new surfaces internally and externally with high class french polish incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WOODEN BOTTOM FD-56(M)/285 :- S&F in repair following parts of the chair wooden bottom without arms with Ist class hard wood (Teak) as per existing shape & size duly planned and finished as shown on drawing complete all as specified and directed ;-

Rear Legs

Front Legs

Side rails

Front/Back rails of seat

Back stiffener

Bottom stiffener

Seat of 6mm thick BWR copmmercial ply wood complete all as shown in Drg specified and directed.

M&L for polishing of chair wooden bottom without arms with high class frenchpolish to all expensed surfaces except in side of seat frame(o4 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR TO TABLE 900mm x 900mm FD-88(M)/ 291:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (Shisam) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed ;-

Long rail

short rail

Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thickteak wood edging all around the Top including fixing of 8 Nos wooden corners to joining part of rails and legs for each table as directed .

M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surfacecomplete all as specified and directed.

REPAIR TO TABLE 1520X860x760MM FD-139(M)/ 289;- S&F in repair following parts of thetable 1520X860X760mm with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail of table frame

Short rail of table frame

Table top of 18/19mm thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood bedging all around the Top including fixing of 8 Nos wooden corners to joining part of rails and legs for each table as directed .

M&L for polishing of table 1520x860x760mm with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

Table Writing medium FD-249 & 275 S&F in repair of the following parts of Table Writing as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :-

New Top of size 1145 x 600 mm made out of 18 mm thick pre-laminated particle board teak faced of make-Bhutan/Novopan/Archid and providing Teakwood beading 4 mm thick all around the top.

New Legs

New Top Rails

New Stiffners

New Drawers

New Shutter of cupboard of size 405 x 335 mm made out of 18 mm thick pre-laminated particle board teak faced and providing CP Knobs and piyano hinges for hanging with the table.

New 6 mm thick commercial ply make- National/Century/Kitply on back of cupboards

Men & Labour for polishing of two coats of French polish of best quality to the table after preparation of old surfaces as specified and as directed.

REAPIR TO STOOL DRESSING FD-252/ 282/374: - S&F in repairs of following parts of stool dressing with Ist class hard wood (Shisam) as per existing shape and size duly planned complete all as specified and directed

Side rails of seat frame including holes for weaving (spacing of holes shall be match with the existing rail).

Front/Back rails of seat frame incl drlling holes for weaving (spacing of holes shall be match with the existing rail).

Recaning seat with new 2mm wide half round white plastic cane of superior quality in Godrej pattrn.

M&L for polishing of old/new surfaces with high class French polish to all exposed surfaces all as specified and directed.

REPAIR TO TABLE OFFICE CLERK/TYPIST : S&F in repair of the following parts of table office clerk/Typist with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail

Short Rail

Bottom Side stiffener

Bottom centre stiffener

Drawer with 6mm thick commercial ply at bottom only and sides, back shall be 12mm thick Ist class hard wood (Shisam) with knob.

Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all round complete all as shown in drg and directed.

M&L for polishing of table office clerk with high class French polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as directed.

REPAIR TO TABLE OFFICE OFFICER FD-224/283 S&F in repair of the following parts of table office officer with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail

Short Rail

Bottom Side stiffener

Bottom centre stiffener

Drawer with 6mm thick commercial ply at bottom only and sides, back shall be 12mm thick Ist class hard wood (Shisam) with knob.

Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all round complete all as shown in drg and directed.

M&L for polishing of table office officer with high class French polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as directed.

BOOK CASE OPEN LARGE FD-45 (M) :- S&F in repair of following parts of book case as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-

Removing of existing u/s shutter and S&F new shutter of 18 mm thick teak pre-lamintaed particle board one side teak wood other side white including 4 mm thick TW beading on three side of shutter all as specified and directed.

Removing of u/s back & sides and S&F new 6mm thick BWR plywood as per existing shape and size all as specified and directed.

Removing old u/s bottom and S&F new bottom of 2nd class hard wood all as specified and directed.

Removing old u/s top and S&F new top 18mm thick pre-laminated particle board as per existing shape and size all as specified and directed.

Removing of existing u/s partition wall and S&F new partition wall of 2nd class hard wood all as specified and directed.

Removing of old u/s shelf and S&F new self 15mm thick of 2nd class hard wood all as specified and directed.

Bottom Frame with Legs

Taking out old u/s knobs and S&F knobswith required size of screw all as specified and directed.

Taking down old u/s hinges and S&F new hinges piano type chromium plated ISI marked with required size of screws all as specified and directed.

M&L for polishing of old/new surfaces internally and externally with high class french polish incl matching with new component with old one after preparation complete all as specified and directed.

Anand Construction

M/S DURGA ASSOCIATES

M/s Laxmi Associate

Afghani Constructions